Buttweld Fittings Manufacturer in Cyprus

Request a Call Back


Buttweld Fittings Manufacturer And Suppliers in Cyprus



We are in Buttweld Fittings Manufacturer very passionate about manufacturing premium quality pipe fittings for permanent welds. For 33 years we understand the requirements and applications of our customers and have been a reliable partner when it comes to producing pipe fittings for the approved market. We are where our customers are – worldwide.
Trust us as a versatile and powerful manufacturer. Here you find your personal consultant With our well-stocked warehouse we are always ready for your individual order, if possible, we deliver just-in-time. We serve various industries and commercial sectors and have been convincing for over 33 years with an ideal price-performance ratio.

The Leading Manufacturer Stainless Steel Buttweld Fittings, Carbon Steel Buttweld Fittings, Alloy Steel Buttweld Fittings, SS Buttweld Fittings, CS Buttweld Fittings, Stainless Steel Pipe Fittings, Carbon Steel Pipe Fittings, Alloy Steel Pipe Fittings, Inconel Pipe Fittings, Monel Pipe Fitting, Hastelloy Pipe Fitting, Nickel Alloy Pipe Fitting, Duplex Steel Pipe Fitting, Super Duplex Steel Pipe Fitting, Titanium Pipe Fitting, Alloy 20 Pipe Fitting, 254 SMO Pipe Fitting at market leading Best prices.


Table Of Content

One of The Largest Suppliers, Exporters of ANSI/ASME B16.9 Buttweld Fittings – Elbow, Tee, Reducer, Bend, Cross, End Caps, Stub End, Lap Joint Stub End, Collar, Swage Nipple at Competitive prices in Cyprus.


What Is The Purpose Of Pipe Fittings?

Buttweld Fittings Manufacturer in Cyprus , also known as Buttweld connectors, attach one Buttweld to another in order to lengthen the run or change the flow direction in a plumbing system. These are used to combine, divert or reduce the flow of the water supply, and they come in a variety of sizes to fit the Buttweld they will connect.
The basic purpose of using Buttweld fittings in Buttweld systems is to connect the bores of two or more Buttwelds or tubes. Buttweld fittings are used in piping systems normally :-

  • to connect straight Buttweld or tubing sections,
  • to adapt to different sizes or shapes,
  • to branch or re-direct the piping system,
  • if necessary to provide a jointing method if two dissimilar piping materials are used in the one system, and
  • for other purposes, such as regulating, measuring or changing the direction of the fluid flow or to connect up threaded Buttweld and equipment.

  • They are also used to close or seal a Buttweld.

    How Are Pipe Fittings Classified?

    Buttweld fittings are generally classified as "welded" or "pressure" fittings. Welded fittings are welded on to the piping system where as pressure fitting uses National Buttweld Thread (NPT) to connect to the Buttweld. Pressure fittings are classified as 3000#, 6000# or 9000# (most common).

    What Are Materials Used For Buttweld Fittings?

    The material with which a Buttweld is manufactured often forms the basis for choosing Buttweld fittings. Buttweld fittings are made of the following materials-

  • Carbon steel
  • Low-temperature carbon steel
  • Stainless steel
  • Malleable iron/ductile iron
  • Non-ferrous metals
  • Non-metallic materials
  • Chrome-molybdenum steel
  • Alloy Steel
  • Mild Steel
  • -normally used for high-temperature service

    What Are The Types Of Buttweld Pipe Fittings?

    While there are thousands of specialized Buttweld fittings manufacturers Ahmedabad, some common types of Buttweld fittings which are used widely in piping systems are- (i) elbow, (ii) tee, (iii) cross, (iv) reducer, (v) cap or plug, (vi) union, (vii) coupling, (viii) nipple, etc.

  • Elbow – It is a Buttweld fitting that is installed between two lengths of Buttweld or tube allowing a change of direction, usually 90 degrees or 45 degrees. The ends may be machined for Buttwelding, threaded (usually female), or socketed, etc. When the two ends differ in size, it is called a reducing or reducer elbow. Most elbows are available in short radius or long radius of types. The short radius elbows have a center to end distance equal to the nominal diameter, while the long radius is 1.5 times the nominal diameter. Elbows used on powder transfer systems have a much longer radius (radius of a bend can be 10 times the nominal diameter of the Buttweld) to ensure smooth flow, reduce wear to both product and piping, and reduce the chance of getting blockages.

  • Tee – A tee is used to either combine or split a fluid flow. Most common are equal tees which have the same body and branch diameter but there is also a wide range of reducing tees where either the branch or the body is of a different diameter relative to each other. A swept tee is where the branch enters the body at an arc and is used to minimize the frictional losses and promote flow in the system. Wye (Y) Buttweld tee fittings are with three openings and are used to create branch lines. A wye tee is where the branch is stabbed into the body at an angle usually 45 degrees and is usually used where the branch is a smaller diameter than the main Buttweld. Wye tees are similar to tees except that the branch line is angled to reduce friction and turbulence that could hamper the flow.

  • Cross – A cross has one inlet and three outlets, or vice versa and like tees come in equal and reducing forms. A cross is more expensive than two tees but has the advantage of reduced space and requires less labor to install.

  • Reducer – Reducers are used to join two different Buttweld sizes together. They can be either concentric or eccentric which refers to the relative position of the center lines of the outlet and inlet. Special attention must be given when using reducers in a horizontal orientation as the slope prevents free draining of a system if not installed correctly.

  • Cap or plug – It is a type of Buttweld fitting which is liquid or gas-tight, and is used to cover the end of a Buttweld. A cap has a similar function to a plug. For screwed systems, the cap is having female threads where a plug is having male threads.

  • Coupling – A coupling connects two Buttwelds to each other. If the size of the Buttweld is not the same, the fitting may be called a reducing coupling or reducer, or an adapter. By convention, the term ‘expander’ is not generally used for a coupling that increases Buttweld size; instead, the term ‘reducer’ is used.

  • Union – A union is similar to a coupling except that it is designed to allow quick and convenient disconnection of Buttwelds for maintenance or fixture replacement.

  • Nipple – A short stub of Buttweld usually of threaded steel, brass, chlorinated polyvinyl chloride, or copper; occasionally just bare copper. A nipple is defined as being a short stub of the Buttweld that has external male Buttweld threads at each end, for connecting two other fittings. Nipples are commonly used for hoses.

  • How To Choose Pipe Fittings?

    Buttweld fittings are to be selected considering certain factors. These factors are given below.

  • Connection types:– When using Buttweld fittings, one is to be aware of the fact that a fitting can have two different connector types. Both the ends can have female threads or one end of the fitting can have female threads while the other end can have male threads. One end may have a male slip while the other end can have threads. They can also have matching ends that can accommodate any requirement.

  • Materials of construction:– As a rule, the Buttweld fitting should be of the same material as the material used in the making of the Buttweld in which it is to be fitted. However, in some cases, materials conforming to certain codes or standards can also be used in Buttwelds of another material.

  • Check for flow:– To keep the flow of the fluid consistent in the piping system, the ends of Buttweld fittings are to be slightly larger than the rest of the Buttweld so that they can accommodate connections without narrowing the inner diameter (ID) of the Buttweld.

  • Type of fitting:– Besides Buttweld materials, Buttweld fittings are identified by the type of fitting such as threaded or slip, male or female.

  • Size:– When measuring the size of Buttweld fittings, it is to be noted that the male threaded fittings are measured to the outside edge or outer diameter (OD), while female fittings are measured to the inside edge of the inlet or ID.

  • Thickness:– The Buttweld fittings are available in a number of different thicknesses or ‘schedules’ in the same way as the Buttwelds are available.

  • Design:– Each Buttweld or tube is designed to carry certain specific types of fluids, liquids, gases, chemicals under varying conditions. Accordingly, the Buttweld fittings are also available in a variety of designs.

  • Standards and codes:-There are certain standards and codes set by various standard organizations by which the different Buttweld fittings are graded. Buttweld fittings are selected and used to satisfy these standards.

  • Buttweld Fittings come in Buttweld & Forged Form. Buttweld Fittings is available either seamless or welded form, which is manufactured in all steel material and metal standards compliances.

    Buttweld Fittings Manufacturer Cyprus

    Pipe Fittings Manufacturer is a one of the leading professional Buttweld Fittings Manufacturer in Cyprus andPipe fittings suppliers in Cyprus of stainless steel pipe fittings & carbon steel Pipe fittings in a complete range of stainless steel & carbon steel grades and sizes.
    A buttweld fitting is a weldable Buttweld fitting that allows for change of direction of flow, to branch off, reduce Buttweld size or attach auxiliary equipment. Forged Steel buttweld fittings are manufactured in accordance with ANSI / ASME B16.9.
    Buttweld fittings comprise of long radius elbow, concentric reducer, eccentric reducers, and Tees, etc. Buttweld stainless steel and carbon steel fittings are an important part of the industrial piping system to change direction, branch off, or mechanically join equipment to the system. Buttweld fittings are sold in nominal Buttweld sizes with a specified Buttweld schedule. Butt-welded fitting’s dimensions and tolerances are defined as per ASME standard B16.9.

    Buttweld fittings such as carbon steel and stainless steel offer many advantages compared to threaded and socket weld fittings. The latter is only available up to 4-inch nominal size whereas Buttweld fittings are available in sizes from ½” to 72”.
    Some of the advantages of weld fittings are;-

  • Welded connection offers a more robust connection.
  • Continuous metal structure adds to the strength of the piping system.
  • Butt-weld fittings with matching Buttweld schedules offer seamless flow inside the Buttweld. A full penetration weld and properly fitted LR 90 Elbow, Reducer, Concentric reducer, etc. offers gradual transition via welded Buttweld fitting.
  • All Buttweld fittings have beveled ends as per ASME B16.25 standard. This helps create a full penetration weld without any extra preparation needed for the Buttweld fitting.

  • MOC For Buttweld Fittings?

    Buttweld fittings are most commonly available in carbon steel, stainless steel, nickel alloy, aluminum, and high yield material. High yield Buttweld carbon steel Buttweld fittings are available in A234-WPB, A234-WPC, A420-WPL6, Y-52, Y-60, Y-65, Y-70. All WPL6 Buttweld fittings are annealed and are NACE MR0157 and NACE MR0103 compatible.

    Common Materials for Welded Buttweld Fittings:-

    Carbon Steel Buttweld Fitting

    A234 WPB is the most common material used for carbon steel Buttwelded fittings.
    ASTM A234 WPB is the Standard Specification for Piping Fittings of Wrought Carbon Steel and Alloy Steel for Moderate and High Temperature Service.

    Carbon Steel Buttweld Fitting Specifications
  • ASTM:- A234 WPB
  • ASME:- B16.9, B.11
  • NACE:- MRO175
  • MSS:- SP-83, SP-95
  • Carbon Steel Buttweld Fitting Chemical Composition (%)

    Grade

    C

    Mn

    P

    S

    Si

    Cr

    Mo

    Ni

    Cu

    Others

    max

    max

    WPB

    0.3

    0.29-1.06

    0.05

    0.058

    0.1

    0.4

    0.15

    0.4

    0.4

    V 0.08

    (1,2,3,4,5)

    max

    min

    max

    max

    max

    max

    max


  • Fittings made from a bar or plate may have 0.35 max carbon.
  • Fittings made from forgings may have 0.35 max Carbon and 0.35 max Silicon with no min.
  • For each reduction of 0.01% below the specified Carbon maximum, an increase of 0.06% Manganese above the specified maximum will be permitted, up to a maximum of 1.35%.
  • The sum of Copper, Nickel, Niobium, and Molybdenum shall not exceed 1.00%.
  • The sum of Niobium and Molybdenum shall not exceed 0.32%.

  • Stainless Steel Buttweld Fitting

    Stainless buttweld fittings are available in 316 and 304 grades.

    304 (UNS S30400) / 304L (S30403)/ 316 (UNS S31600) / 316L (S31603)
    Stainless Steel Buttweld Pipe Fitting Chemical Composition (%)

    C

    Cr

    Mn

    Ni

    P

    S

    Si

    MAX

    MAX

    MAX

    MAX

    MAX

    0.035
    0.035

    18.0- 20.0
    16.0- 18.0

    2.00
    2.00

    8.0-13.0
    10.0-14.0

    0.045
    0.045

    0.030
    0.030

    1.00
    1.00

    Tensile Requirements
  • Tensile Strength: (KSI) = 60 & 70
  • Yield Strength: (KSI) = 35 & 25
  • (KSI converts to MPA {Megapascals} by multiplying by 6.895)

  • Buttweld Fitting Beveling

    All welded pipe fittings have bevelled ends to allow for ease of welding. This bevel allows for full penetration weld in most cases.
    There are two types of bevels;-

  • Plain Bevel
  • Compound Bevel
  • Buttweld Fittings Dimension

    Pipe Fittings Manufacturer is an International ISO certified and highly professional ASME B16.9 Buttweld Pipe Fittings Manufacturer, Suppliers & exporter in Cyprus. Stainless Steel, Carbon Steel, Alloy Steel Buttweld Elbow, Tee, Cross, Reducer, Nipple, Pipe Cap, Stubend, Bend Suppliers in Cyprus at the Best price.

    One of The Largest Suppliers & Manufacturer, Exporters of ANSI/ASME B16.9 buttweld Fittings – Elbow, Tee, Reducer, Bend, Cross, End Caps, Stub End, Lap Joint Stub End, Collar, Swage Nipple at Competitive prices in Cyprus.


    ASME / ANSI B16.9 buttweld Pipe Fittings Specifications – Cyprus

    Outside Diameter (OD) 1/8” NB TO 48” NB. (Seamless & 100% X-Ray Welded, Fabricated)
    Dimensions ASME/ANSI B16.9, MSS-SP-43 Type A, MSS-SP-43 Type B, JIS B2312, JIS B2313, ASME B16.28
    Type Seamless / Welded / Fabricated – Elbow, Tee, Cross, Reducer, Nipple, Pipe Cap, Stubend, Bend
    Wall Thickness SCH5, SCH10, SCH20, SCH30, SCH40, STD, SCH80, XS, SCH60, SCH80, SCH120, SCH140, SCH160, XXS / 3mm – 40mm
    Buttweld Fittingsing Radius R = 1D, 1.5D, 2D, 3D, 5D, 6D, 8D, 10D
    Product’s Angle 0°~180°
    Value Added Services Hot Dipped Galvanizing, Epoxy & FBE Coating, Electro Polish, Sand Blasting, Threading, Soldering
    Important Grades ASTM A403 WP 304 / 304L / 304H / 316 / 316L / 317 / 317L / 321 / 310 / 347 / 904L
    Production Materials Stainless Steel, Alloy Steel, Carbon Steel, Duplex & Super Duplex Steel, Nickel Alloys, Cupro Nickel, Hastelloy, Titanium, SMO 254, Alloy 20, Inconel


    We are Suppliers of all Types of Buttweld Pipe Fittings Products – Cyprus



    Pipe Fittings Products in Cyprus

    Long Radius Bend Manufacturer in Cyprus

    Long Radius Bend, ANSI B16.9 Long Radius Bends, MSS-SP-43 Long Radius Bends, Bends, ANSI B16.28 Bends Manufacturer & Exporter in India, Manufacturer of high-quality Long Radius Bend in Cyprus

    Pipe Fittings Manufacturer is a well-known exporter, manufacturer, and supplier of Long Radius Bend in Cyprus in the steel market industry. The purpose of Radius Pipe Bends is to amend the direction and flow through a 180-degree angle. Coming in two important forms of Bends – short radius bend and long radius bend – to which both of them are having a midpoint-to-midpoint length, along with double the indistinguishable 90-degree elbow. The most important application for these pipe fittings is in heater coils and heat exchangers. Long Radius Pipe Bends Butt Weld Pipe Fittings are manufactures with dissimilar grades of standard ranges and meets its provisions through international and national standards. They are quite unproblematic to remove and install and can be accessible to our customers in diverse technical specifications of sizes and threading as per necessity. We manufacture buttweld long radius bend are ideal for marine applications, chemical processing, Dairy Industries, Oil & Gas Pipeline Industries, petrochemical Industries, Paper & Pulp Industries, Pharmaceutical Industries, Food Processing Industries, Ship Building Industries, Power and Energy Industries etc.

    Long Radius Bend Features

    • Superior quality steel material
    • Easy to install
    • Outstanding Performance
    • High strength
    • Resistance to abrasion
    • Good tensile strength

    Standard: ANSI/ASME, MSS, JIS, DIN, BS, etc.

    Grade of Long Radius Bend

    1. Stainless Steel Long Radius Bend : ASTM A403 WP Gr. 304, 304H, 309, 310, 316, 316L, 317L, 321, 347, 904L
    2. Carbon Steel Long Radius Bend: ASTM A 234 WPB, WPBW, WPHY 42, WPHY 46, WPHY 52, WPH 60, WPHY 65 & WPHY 70.
    3. Low Temperature Carbon Steel Long Radius Bend: ASTM A420 WPL3, A420 WPL6
    4. Alloy Steel Long Radius Bend: ASTM / ASME A/SA 234 Gr. WP 1, WP 5, WP 9, WP 11, WP 12, WP 22, WP 91
    5. Duplex Steel Long Radius Bend : ASTM A 815, ASME SA 815 UNS NO S31803, S32205. Worst-off No. 1.4462
    6. Nickel Alloy Long Radius Bend : ASTM / ASME SB 336 UNS 2200 ( NICKEL 200 ), UNS 2201 (NICKEL 201 ), UNS 4400 (MONEL 400 ), UNS 8020 ( ALLOY 20 / 20 CB 3, UNS 8825 INCONEL (825), UNS 6600 (INCONEL 600 ), UNS 6601 ( INCONEL 601 ), UNS 6625 (INCONEL 625), UNS 10276 ( HASTELLOY C 276 )


    Long Radius Elbow Manufacturer in Cyprus

    Pipe Fittings Manufacturer is premium manufacturer and supplier of high-quality Forged Elbow, buttweld long radius elbow, and short radius & long radius elbow in Cyprus. We are known as Stainless Steel long radius elbow, Carbon Steel long radius elbow, Alloy Steel long radius elbow, Mild Steel long radius elbow, Monel long radius elbow, Inconel long radius elbow, Hastelloy long radius elbow, Titanium long radius elbow, Duplex Steel long radius elbow, etc. Top leading long radius elbow supplier in Cyprus is due to exporting and manufacturing on a large scale. Based in Cyprus, we are the leading global manufacturer and supplier of 90 degree elbow, 45 degree elbow, 180 degree elbow in the metal market of Cyprus. The most common dimensional standard for long radius elbow is ASME B16. 9, B16. 28 MSS-SP43/75 for sizes ranging from ½” to 72″ (in all Schedules).There are different types of long radius elbow used for different needs. Stainless steel forged fittings are used with Nuts. Our buttweld long radius elbows are available in different sizes, grades, and shapes are ideal for marine applications, chemical processing, Dairy Industries, Oil & Gas Pipeline Industries, petrochemical Industries, Paper & Pulp Industries, Pharmaceutical Industries, Food Processing Industries, Ship Building Industries, Power and Energy Industries, etc.

    Long Radius Elbow Features

    • Superior quality steel material
    • Easy to install
    • Outstanding Performance
    • High strength
    • Resistance to abrasion
    • Good tensile strength

    Standard: ANSI/ASME, MSS, JIS, DIN, BS, etc.

    Grade of Long Radius Elbow

    1. Stainless Steel Long Radius Elbow : ASTM A403 WP Gr. 304, 304H, 309, 310, 316, 316L, 317L, 321, 347, 904L
    2. Carbon Steel Long Radius Elbow: ASTM A 234 WPB, WPBW, WPHY 42, WPHY 46, WPHY 52, WPH 60, WPHY 65 & WPHY 70.
    3. Low Temperature Carbon Steel Long Radius Elbow: ASTM A420 WPL3, A420 WPL6
    4. Alloy Steel Long Radius Elbow: ASTM / ASME A/SA 234 Gr. WP 1, WP 5, WP 9, WP 11, WP 12, WP 22, WP 91
    5. Duplex Steel Long Radius Elbow : ASTM A 815, ASME SA 815 UNS NO S31803, S32205. Worst-off No. 1.4462
    6. Nickel Alloy Long Radius Elbow : ASTM / ASME SB 336 UNS 2200 ( NICKEL 200 ), UNS 2201 (NICKEL 201 ), UNS 4400 (MONEL 400 ), UNS 8020 ( ALLOY 20 / 20 CB 3, UNS 8825 INCONEL (825), UNS 6600 (INCONEL 600 ), UNS 6601 ( INCONEL 601 ), UNS 6625 (INCONEL 625), UNS 10276 ( HASTELLOY C 276 )


    Pipe Cross Manufacturer in Cyprus

    Pipe Fittings Manufacturer is leading independent involved in offering a higher quality of Cross Pipe Fittings in Cyprus that is manufactured using superior-grade of raw material in compliance by means of industry norms. Comes in two different types – Equal Cross Pipe Fittings and Pipe Fittings Unequal Cross – they are widely preferred by users due to their accurate tensile strength, corrosion and abrasion resistant and excellent finish. We supply Equal Cross Pipe Fittings in Cyprus a wide range of dimensions which makes them suitable for interlinked plumbing systems confined in an area. Stainless Steel pipe cross, carbon steel pipe cross, Mild Steel pipe cross, Inconel Blind Flanges, Hastelloy pipe cross, Monel pipe cross, Titanium pipe cross, Aluminium pipe cross. Our buttweld pipe cross are available in different sizes, grades, and shapes are ideal for marine applications, chemical processing, Dairy Industries, Oil & Gas Pipeline Industries, petrochemical Industries, Paper & Pulp Industries, Pharmaceutical Industries, Food Processing Industries, Ship Building Industries, Power and Energy Industries, etc.

    Pipe Cross Features

    • Superior quality steel material
    • Easy to install
    • Outstanding Performance
    • High strength
    • Resistance to abrasion
    • Good tensile strength

    Standard: ANSI/ASME, MSS, JIS, DIN, BS, etc.

    Grade of Pipe Cross

    1. Stainless Steel Pipe Cross : ASTM A403 WP Gr. 304, 304H, 309, 310, 316, 316L, 317L, 321, 347, 904L
    2. Carbon Steel Pipe Cross: ASTM A 234 WPB, WPBW, WPHY 42, WPHY 46, WPHY 52, WPH 60, WPHY 65 & WPHY 70.
    3. Low Temperature Carbon Steel Pipe Cross: ASTM A420 WPL3, A420 WPL6
    4. Alloy Steel Pipe Cross: ASTM / ASME A/SA 234 Gr. WP 1, WP 5, WP 9, WP 11, WP 12, WP 22, WP 91
    5. Duplex Steel Pipe Cross : ASTM A 815, ASME SA 815 UNS NO S31803, S32205. Worst-off No. 1.4462
    6. Nickel Alloy Pipe Cross : ASTM / ASME SB 336 UNS 2200 ( NICKEL 200 ), UNS 2201 (NICKEL 201 ), UNS 4400 (MONEL 400 ), UNS 8020 ( ALLOY 20 / 20 CB 3, UNS 8825 INCONEL (825), UNS 6600 (INCONEL 600 ), UNS 6601 ( INCONEL 601 ), UNS 6625 (INCONEL 625), UNS 10276 ( HASTELLOY C 276 )


    Pipe End Cap Manufacturer in Cyprus

    We are the leading manufacturer and supplier of Pipe End Cap in Cyprus. Get the best offer for high-quality Pipe End Cap from us in Cyprus. We have plenty of stock of Pipe End Cap in the Cyprus. Place your order online for Pipe End Cap in Cyprus. We are the leading Pipe End Cap manufacturer in Cyprus. Get your best quality Pipe End Cap in Cyprus. Our Pipe End Cap Buttweld Pipe Fittings are manufactures with dissimilar grades of standard ranges and meets its provisions through international and national standards. Steel Pipe end caps butt-weld pipe fitting used for closing the end of a pipe. This is a very thick and strong stainless butt cap & this fitting has a female butt-weld, beveled opening for welding to male connections with a smooth bore. Made of stainless steel pipe end cap, carbon steel pipe end cap, alloy steel pipe end cap, mild steel pipe end cap, carbon steel, alloy steel, mild steel, Hastelloy, Monel, nickel, Inconel, the lower carbon content of this pipe fitting minimizes harmful carbide precipitation during welding, ensuring corrosion resistance. It meets both 304 steel strength standards and 304L extra-low carbon standards for quality assurance. Pipe end caps are components used for connecting, terminating, controlling flow, and changing the direction of piping in many different industries. When purchasing pipe end caps, consider the application, as this will affect material type, shape, size, and required durability. Steel Dome Pipe Cap is available threaded or unthreaded, in many shapes, styles, sizes, and schedules (pipe wall thickness). Our buttweld pipe end caps are available in different sizes, grades, and shapes are ideal for marine applications, chemical processing, Dairy Industries, Oil & Gas Pipeline Industries, petrochemical Industries, Paper & Pulp Industries, Pharmaceutical Industries, Food Processing Industries, Ship Building Industries, Power and Energy Industries, etc.

    Pipe End Cap Features

    • Superior quality steel material
    • Easy to install
    • Outstanding Performance
    • High strength
    • Resistance to abrasion
    • Good tensile strength

    Standard: ANSI/ASME, MSS, JIS, DIN, BS, etc.

    Grade of Pipe End Cap

    1. Stainless Steel Pipe End Cap : ASTM A403 WP Gr. 304, 304H, 309, 310, 316, 316L, 317L, 321, 347, 904L
    2. Carbon Steel Pipe End Cap: ASTM A 234 WPB, WPBW, WPHY 42, WPHY 46, WPHY 52, WPH 60, WPHY 65 & WPHY 70.
    3. Low Temperature Carbon Steel Pipe End Cap: ASTM A420 WPL3, A420 WPL6
    4. Alloy Steel Pipe End Cap: ASTM / ASME A/SA 234 Gr. WP 1, WP 5, WP 9, WP 11, WP 12, WP 22, WP 91
    5. Duplex Steel Pipe End Cap : ASTM A 815, ASME SA 815 UNS NO S31803, S32205. Worst-off No. 1.4462
    6. Nickel Alloy Pipe End Cap : ASTM / ASME SB 336 UNS 2200 ( NICKEL 200 ), UNS 2201 (NICKEL 201 ), UNS 4400 (MONEL 400 ), UNS 8020 ( ALLOY 20 / 20 CB 3, UNS 8825 INCONEL (825), UNS 6600 (INCONEL 600 ), UNS 6601 ( INCONEL 601 ), UNS 6625 (INCONEL 625), UNS 10276 ( HASTELLOY C 276 )


    Pipe Reducer Manufacturer in Cyprus

    We are the leading manufacturer and supplier of Pipe Reducer in Cyprus. Get the best offer for high-quality Pipe Reducer from us in Cyprus. We have plenty of stock of Pipe Reducer in the Cyprus. Place your order online for Pipe Reducer in Cyprus. We are the leading Manufacturer Of Pipe Fittings Reducer in Cyprus. Get your best quality Pipe Reducer in Cyprus. Our Pipe Reducer Buttweld Pipe Fittings are manufactures with dissimilar grades of standard ranges and meets its provisions through international and A steel pipe reducer is a component used in the pipelines to reduce its size from large to small bore in accordance to the inner diameter. The length of the reduction here is equal to an average of the smaller and larger pipe diameters. Here, the reducer can be used as a diffuser or a nozzle. The reducer helps in meeting the existing piping of varied sizes or hydraulic flow of the piping systems. The Cyprusge of a steel reducer is carried out in the chemical factories and power plants. It makes the piping system reliable and compact. It safeguards the piping system from any kind of adverse impact or thermal deformation. When it is on the pressure circle, it prevents from any type of leakage and is easy to install. The nickel or chrome coated reducers extends the product life, useful for high vapor lines, and prevents corrosion. Worldwide largest Manufacturer of Pipe Reducer Fittings in Duplex Steel, Stainless Steel, Nickel Alloy 200, Monel Steel, Copper Nickel, Alloy 20, Hastelloy, Titanium, Alloy Steel, Mild Steel, Carbon Steel Available in All dimensions. Our buttweld pipe reducer are available in different sizes, grades, and shapes are ideal for marine applications, chemical processing, Dairy Industries, Oil & Gas Pipeline Industries, petrochemical Industries, Paper & Pulp Industries, Pharmaceutical Industries, Food Processing Industries, Ship Building Industries, Power and Energy Industries, etc.

    Pipe Reducer Features

    • Superior quality steel material
    • Easy to install
    • Outstanding Performance
    • High strength
    • Resistance to abrasion
    • Good tensile strength

    Standard: ANSI/ASME, MSS, JIS, DIN, BS, etc.

    Grade of Pipe Reducer

    1. Stainless Steel Pipe Reducer : ASTM A403 WP Gr. 304, 304H, 309, 310, 316, 316L, 317L, 321, 347, 904L
    2. Carbon Steel Pipe Reducer: ASTM A 234 WPB, WPBW, WPHY 42, WPHY 46, WPHY 52, WPH 60, WPHY 65 & WPHY 70.
    3. Low Temperature Carbon Steel Pipe Reducer: ASTM A420 WPL3, A420 WPL6
    4. Alloy Steel Pipe Reducer: ASTM / ASME A/SA 234 Gr. WP 1, WP 5, WP 9, WP 11, WP 12, WP 22, WP 91
    5. Duplex Steel Pipe Reducer : ASTM A 815, ASME SA 815 UNS NO S31803, S32205. Worst-off No. 1.4462
    6. Nickel Alloy Pipe Reducer : ASTM / ASME SB 336 UNS 2200 ( NICKEL 200 ), UNS 2201 (NICKEL 201 ), UNS 4400 (MONEL 400 ), UNS 8020 ( ALLOY 20 / 20 CB 3, UNS 8825 INCONEL (825), UNS 6600 (INCONEL 600 ), UNS 6601 ( INCONEL 601 ), UNS 6625 (INCONEL 625), UNS 10276 ( HASTELLOY C 276 )


    Tee Pipe Fittings Manufacturer in Cyprus

    We are the leading manufacturer and supplier of Tee Pipe Fitting in Cyprus. Get the best offer for high-quality Tee Pipe Fitting from us in Cyprus. We have plenty of stock of Tee Pipe Fitting in the Cyprus. Place your order online for Tee Pipe Fitting in Cyprus. We are the leading Tee Pipe Fitting manufacturer in Cyprus. Get your best quality Tee Pipe Fitting in Cyprus. Our Tee Pipe Fitting Buttweld Pipe Fittings are manufactures with dissimilar grades of standard ranges and meets its provisions through international and national standards. Pipe Fittings Manufacturer manufactures buttweld steel pipe tee fittings from stainless steel pipe tee fitting, carbon steel pipe tee fitting, aluminum pipe tee fitting, mild steel pipe tee fitting, alloy steel pipe tee fitting, mild steel pipe tee fitting, Hastelloy pipe tee fitting, Monel pipe tee fitting, nickel pipe tee fitting, Inconel pipe tee fitting, and all other available alloys in all schedules. A pipe fitting can be called a pipe tee whenever it is a 3-way pipe fitting, the most common type of pipe fitting as it is used to combine and/or split the flow of fluid as well as to change directions. We supply straight tees (equal tees) and reducing tees (unequal tees) to pipe fitting distributors throughout the Mumbai, India. Visit our laterals page to learn more about lateral tees. Our buttweld pipe tee fitting are available in different sizes, grades, and shapes are ideal for marine applications, chemical processing, Dairy Industries, Oil & Gas Pipeline Industries, petrochemical Industries, Paper & Pulp Industries, Pharmaceutical Industries, Food Processing Industries, Ship Building Industries, Power and Energy Industries, etc.

    Tee Pipe Fittings Features

    • Superior quality steel material
    • Easy to install
    • Outstanding Performance
    • High strength
    • Resistance to abrasion
    • Good tensile strength

    Standard: ANSI/ASME, MSS, JIS, DIN, BS, etc.

    Grade of Tee Pipe Fittings

    1. Stainless Steel Tee Pipe Fittings : ASTM A403 WP Gr. 304, 304H, 309, 310, 316, 316L, 317L, 321, 347, 904L
    2. Carbon Steel Tee Pipe Fittings: ASTM A 234 WPB, WPBW, WPHY 42, WPHY 46, WPHY 52, WPH 60, WPHY 65 & WPHY 70.
    3. Low Temperature Carbon Steel Tee Pipe Fittings: ASTM A420 WPL3, A420 WPL6
    4. Alloy Steel Tee Pipe Fittings: ASTM / ASME A/SA 234 Gr. WP 1, WP 5, WP 9, WP 11, WP 12, WP 22, WP 91
    5. Duplex Steel Tee Pipe Fittings : ASTM A 815, ASME SA 815 UNS NO S31803, S32205. Worst-off No. 1.4462
    6. Nickel Alloy Tee Pipe Fittings : ASTM / ASME SB 336 UNS 2200 ( NICKEL 200 ), UNS 2201 (NICKEL 201 ), UNS 4400 (MONEL 400 ), UNS 8020 ( ALLOY 20 / 20 CB 3, UNS 8825 INCONEL (825), UNS 6600 (INCONEL 600 ), UNS 6601 ( INCONEL 601 ), UNS 6625 (INCONEL 625), UNS 10276 ( HASTELLOY C 276 )




    ASME B16.9 Buttweld Pipe Fittings Applications – Cyprus

    • Pipe Fittings For Oil & Gas Industries
    • Pipe Fittings For Petrochemical Industries
    • Pipe Fittings For Engineering Industries
    • Pipe Fittings For Chemical Industries
    • Pipe Fittings For Sugar & Paper Pulp Industries
    • Pipe Fittings For Power Generation Industries
    • Pipe Fittings For Fertilizers & Pesticides Industries
    • Pipe Fittings For Food Processing & Dairy Industries
    • Pipe Fittings For Polymer & Textiles Industries
    • Pipe Fittings For Pharmaceutical Industries
    • Pipe Fittings For Bio-Pharma Industries



    For More Information About Pipe Fittings Please Call +91 9987994248 or Send an Email to sales@fitwelindia.com


    Exporting Cities Destinations for Buttweld Fittings

    REQUEST A CALL BACK