We are in PED Approved Buttweld Fittings Manufacturer very passionate about manufacturing premium quality pipe fittings for permanent welds. For 33 years we understand the requirements and applications of our customers and have been a reliable partner when it comes to producing butt-weld fittings for the approved market. We are where our customers are – worldwide.
PED Certified Buttweld Fittings Manufacturer is one of the best manufacturers, suppliers, and exporters of Pipe Fittings in Gabon in a variety of materials. Pipe Fittings are used to connect pipes of different diameters. Our Pipe Fittings offers the best finish materials and proper dimensional specifications with materials certifications.
Our Pipe Fittings are used in the piping system of water, oil, gas, and many other applications. The fittings provided by us made up of materials such as Stainless Steel Pipe Fittings, Duplex & Super Duplex Steel, Carbon Steel, Alloy Steel, Nickel Alloy, Monel, Inconel, Hastelloy, Brass, Titanium, Copper & Copper Alloy, etc.
One of The Largest Suppliers, Exporters of ANSI/ASME B16.9 Pipe Fittings – Elbow, Tee, Reducer, Bend, Cross, End Caps, Stub End, Lap Joint Stub End, Collar, Swage Nipple at Competitive prices in Gabon.
A Buttweld fitting is a part which is joined to a Buttweld. An American standard Buttweld thread is a type of screw or thread, commonly used on Pipe Fittings to assure a tight seal. A Buttweld fitting is a part which is joined to a Buttweld. These are used to combine, divert or reduce the flow of the water supply, and they come in a variety of sizes to fit the Buttweld they will connect.
Pipe Fittings dimensions are important and there are sizing standards to follow. While most have openings of the same size on each end, some fittings are designed with different-sized openings and serve as the transition from one size Buttweld to another. Pipe Fittings are Piping component that helps in Changes the direction of the flow such as elbows, tees. Changes the size of the Buttweld such as reducers, reducing tees. Connect different components such as couplings and stop the flows such as Caps.
Buttweld Fittings Manufacturers , also known as Buttweld connectors, attach one Buttweld to another in order to lengthen the run or change the flow direction in a plumbing system. These are used to combine, divert or reduce the flow of the water supply, and they come in a variety of sizes to fit the Buttweld they will connect.
The basic purpose of using Pipe Fittings in Buttweld systems is to connect the bores of two or more Buttwelds or tubes. Pipe Fittings are used in piping systems normally :-
They are also used to close or seal a Buttweld.
Pipe Fittings are generally classified as "welded" or "pressure" fittings. Welded fittings are welded on to the piping system where as pressure fitting uses National Buttweld Thread (NPT) to connect to the Buttweld. Pressure fittings are classified as 3000#, 6000# or 9000# (most common).
Pipe Fittings are usually manufactured from the Buttweld, bar, hollow bar, castings, or forgings. The fittings are used in non-critical, low-pressure applications where welding is not possible or required. They, therefore, provide a relatively low-cost method of connection. Buttweld Fittings Manufacturers Gabon are usually fitted with a sealant (paste or tape such as PTFE) and are considered to be permanent Buttweld-work. Buttweld or socket weld fittings are a type of fittings used for forming circumferential Buttweld joints in Buttweldwork systems. They are used for critical systems and in areas where Buttweld-work is permanent and are designed to provide good flow characteristics.
Fittings for piping systems can be expensive and require a proportionally large labor element to install, therefore correct selection and use is of vital importance to a well-installed piping system. Every type of piping material has a range of fittings that can be used with it and some piping materials can have multiple different ranges of fittings that can be used. For example, copper piping systems can be installed by bending the Buttweld and therefore using no elbows, using soldered copper fittings or compression brass fittings depending on the type of service being transferred in the copper Buttweld. Fittings are generally available with ends to match the piping installation.
Fittings for Buttweld and tubing are most often made from the same base material as the Buttweld or tubing being connected, e.g., stainless steel, steel, copper, or plastic. However, any material that is allowed by code may be used but must be compatible with the other materials in the system, the fluids being transported, and the temperatures and pressures inside and outside of the system.
The material with which a Buttweld is manufactured often forms the basis for choosing Pipe Fittings. Pipe Fittings are made of the following materials.
-normally used for high-temperature service
While there are thousands of specialized Buttweld Fittings Manufacturers Ahmedabad, some common types of Pipe Fittings which are used widely in piping systems are- (i) elbow, (ii) tee, (iii) cross, (iv) reducer, (v) cap or plug, (vi) union, (vii) coupling, (viii) nipple, etc.
Buttweld Fittings Manufacturer is a one of the leading professional Buttweld Fittings Manufacturers in Gabon andPipe fittings suppliers in Gabon of stainless steel pipe fittings & carbon steel Pipe fittings in a complete range of stainless steel & carbon steel grades and sizes.
A buttweld fitting is a weldable Buttweld fitting that allows for change of direction of flow, to branch off, reduce Buttweld size or attach auxiliary equipment. Forged Steel Pipe Fittings are manufactured in accordance with ANSI / ASME B16.9.
Pipe Fittings comprise of long radius elbow, concentric reducer, eccentric reducers, and Tees, etc. Buttweld stainless steel and carbon steel fittings are an important part of the industrial piping system to change direction, branch off, or mechanically join equipment to the system. Pipe Fittings are sold in nominal Buttweld sizes with a specified Buttweld schedule. Butt-welded fitting’s dimensions and tolerances are defined as per ASME standard B16.9.
Pipe Fittings such as carbon steel and stainless steel offer many advantages compared to threaded and socket weld fittings. The latter is only available up to 4-inch nominal size whereas Pipe Fittings are available in sizes from ½” to 72”.
Some of the advantages of weld fittings are;-
Pipe Fittings are most commonly available in carbon steel, stainless steel, nickel alloy, aluminum, and high yield material. High yield Buttweld carbon steel Pipe Fittings are available in A234-WPB, A234-WPC, A420-WPL6, Y-52, Y-60, Y-65, Y-70. All WPL6 Pipe Fittings are annealed and are NACE MR0157 and NACE MR0103 compatible.
Common Materials for Welded Pipe Fittings:-
A234 WPB is the most common material used for carbon steel Buttwelded fittings.
ASTM A234 WPB is the Standard Specification for Piping Fittings of Wrought Carbon Steel and Alloy Steel for Moderate and High Temperature Service.
Grade |
C |
Mn |
P |
S |
Si |
Cr |
Mo |
Ni |
Cu |
Others |
– |
– |
– |
max |
max |
– |
– |
– |
– |
– |
– |
WPB |
0.3 |
0.29-1.06 |
0.05 |
0.058 |
0.1 |
0.4 |
0.15 |
0.4 |
0.4 |
V 0.08 |
(1,2,3,4,5) |
max |
– |
– |
– |
min |
max |
max |
max |
max |
max |
Stainless Pipe Fittings are available in 316 and 304 grades.
C |
Cr |
Mn |
Ni |
P |
S |
Si |
MAX |
– |
MAX |
– |
MAX |
MAX |
MAX |
0.035 |
18.0- 20.0 |
2.00 |
8.0-13.0 |
0.045 |
0.030 |
1.00 |
All welded pipe fittings have bevelled ends to allow for ease of welding. This bevel allows for full penetration weld in most cases.
There are two types of bevels;-
One of The Largest Suppliers & Manufacturer, Exporters of ANSI/ASME B16.9 Pipe Fittings – Elbow, Tee, Reducer, Bend, Cross, End Caps, Stub End, Lap Joint Stub End, Collar, Swage Nipple at Competitive prices in Gabon.
Outside Diameter (OD) | 1/8” NB TO 48” NB. (Seamless & 100% X-Ray Welded, Fabricated) |
---|---|
Dimensions | ASME/ANSI B16.9, MSS-SP-43 Type A, MSS-SP-43 Type B, JIS B2312, JIS B2313, ASME B16.28 |
Type | Seamless / Welded / Fabricated – Elbow, Tee, Cross, Reducer, Nipple, Pipe Cap, Stubend, Bend |
Wall Thickness | SCH5, SCH10, SCH20, SCH30, SCH40, STD, SCH80, XS, SCH60, SCH80, SCH120, SCH140, SCH160, XXS / 3mm – 40mm |
Pipe Fittingsing Radius | R = 1D, 1.5D, 2D, 3D, 5D, 6D, 8D, 10D |
Product’s Angle | 0°~180° |
Value Added Services | Hot Dipped Galvanizing, Epoxy & FBE Coating, Electro Polish, Sand Blasting, Threading, Soldering |
Important Grades | ASTM A403 WP 304 / 304L / 304H / 316 / 316L / 317 / 317L / 321 / 310 / 347 / 904L |
Production Materials | Stainless Steel, Alloy Steel, Carbon Steel, Duplex & Super Duplex Steel, Nickel Alloys, Cupro Nickel, Hastelloy, Titanium, SMO 254, Alloy 20, Inconel |
We are renowned & most acclaimed Manufacturer, Suppliers, Wholesaler, Dealer, Distributor, Importer & Exporter, Fabricator, Stockist of Stainless Steel Pipe Fittings, Carbon Steel Pipe Fittings, Alloy Steel Pipe Fittings, Mild Steel Pipe Fittings, SMO 254 Pipe Fittings, Alloy 20 Pipe Fittings, Inconel Pipe Fittings, Monel Pipe Fittings, Nickel Alloy Pipe Fittings, Hastelloy Pipe Fittings, Titanium Pipe Fittings, Duplex Steel Pipe Fittings, Aluminum Pipe Fittings, Copper Nickel Pipe Fittings etc.
For More Information About Pipe Fittings Please Call +91 9987994248 or Send an Email to sales@fitwelindia.com