Buttweld Fittings Manufacturer in Zimbabwe

Request a Call Back


Buttweld Fittings Manufacturer And Suppliers in Zimbabwe

Zimbabwe Buttweld Fittings Manufacturer has earned a reputation the world over for delivering nothing but high-quality, custom-made solutions to some of the most prominent companies across many different industries.
Not only do we have Europe’s most comprehensive catalog of high quality, stainless steel, carbon steel & alloy steel Buttweld Fittings, we also maintain high stock levels of raw materials and finished parts to ensure your needs are met with speedy delivery.
Excellently situated for all transport systems, urgent orders for stock parts can easily be dispatched by our team within the hour.



The Leading Manufacturer Stainless Steel Buttweld Fittings, Carbon Steel Buttweld Fittings, Alloy Steel Buttweld Fittings, SS Buttweld Fittings, CS Buttweld Fittings, Stainless Steel Buttweld Fittings, Carbon Steel Buttweld Fittings, Alloy Steel Buttweld Fittings, Inconel Buttweld Fittings, Monel Pipe Fitting, Hastelloy Pipe Fitting, Nickel Alloy Pipe Fitting, Duplex Steel Pipe Fitting, Super Duplex Steel Pipe Fitting, Titanium Pipe Fitting, Alloy 20 Pipe Fitting, 254 SMO Pipe Fitting at market leading Best prices.

Zimbabwe Buttweld Fittings Manufacturer is one of the best manufacturers and suppliers of Buttweld Fittings Manufacturer in Zimbabwe in a variety of materials. Buttweld Fittings are used to connect pipes of different diameters. Our Buttweld Fittings offer the best finish materials and proper dimensional specifications with materials certifications.
Our Buttweld Fittings are used in the piping system of water, oil, gas, and many other applications. The fittings provided by us made up of materials such as Stainless Steel Buttweld Fittings, Duplex & Super Duplex Steel, Carbon Steel, Alloy Steel, Nickel Alloy, Monel, Inconel, Hastelloy, Brass, Titanium, Copper & Copper Alloy, etc.


One of The Largest Suppliers & Manufacturers of ANSI/ASME B16.9 Buttweld Fittings – Elbow, Tee, Reducer, Bend, Cross, End Caps, Stub End, Lap Joint Stub End, Collar, Swage Nipple at Competitive prices in Zimbabwe.


What Are Materials Used For Buttweld Fittings?

Buttweld Fittings for Pipe and tubing are most often made from the same base material as the Pipe or tubing being connected, e.g., stainless steel, steel, copper, or plastic. However, any material that is allowed by code may be used but must be compatible with the other materials in the system, the fluids being transported, and the temperatures and pressures inside and outside of the system.
The material with which a Pipe is manufactured often forms the basis for choosing Buttweld Fittings. Buttweld Fittings are made of the following materials.

  • Carbon steel
  • Low-temperature carbon steel
  • Stainless steel
  • Malleable iron/ductile iron
  • Non-ferrous metals
  • Non-metallic materials
  • Chrome-molybdenum steel
  • Alloy Steel
  • Mild Steel
  • -normally used for high-temperature service

    What Are The Types Of Buttweld Fittings?

    While there are thousands of specialized Buttweld Fittings Manufacturer Zimbabwe, some common types of Buttweld fittings which are used widely in piping systems are- (i) elbow, (ii) tee, (iii) cross, (iv) reducer, (v) cap or plug, (vi) union, (vii) coupling, (viii) nipple, etc.

    Buttweld Fittings come in Buttweld & Forged Form. Buttweld Fittings are available either seamless or welded form, which is manufactured in all steel material and metal standards compliances.

    MOC For Buttweld Fittings?

    Buttweld Fittings are most commonly available in carbon steel, stainless steel, nickel alloy, aluminum, and high yield material. High yield Pipe carbon steel Buttweld Fittings are available in A234-WPB, A234-WPC, A420-WPL6, Y-52, Y-60, Y-65, Y-70. All WPL6 Buttweld Fittings are annealed and are NACE MR0157 and NACE MR0103 compatible.

    Common Materials for Welded Buttweld Fittings:-

    Carbon Steel Pipe Fitting

    A234 WPB is the most common material used for carbon steel Pipeed fittings.
    ASTM A234 WPB is the Standard Specification for Piping Fittings of Wrought Carbon Steel and Alloy Steel for Moderate and High Temperature Service.

    Carbon Steel Pipe Fitting Specifications
  • ASTM:- A234 WPB
  • ASME:- B16.9, B.11
  • NACE:- MRO175
  • MSS:- SP-83, SP-95
  • Carbon Steel Pipe Fitting Chemical Composition (%)

    Grade

    C

    Mn

    P

    S

    Si

    Cr

    Mo

    Ni

    Cu

    Others

    max

    max

    WPB

    0.3

    0.29-1.06

    0.05

    0.058

    0.1

    0.4

    0.15

    0.4

    0.4

    V 0.08

    (1,2,3,4,5)

    max

    min

    max

    max

    max

    max

    max


  • Fittings made from a bar or plate may have 0.35 max carbon.
  • Fittings made from forgings may have 0.35 max Carbon and 0.35 max Silicon with no min.
  • For each reduction of 0.01% below the specified Carbon maximum, an increase of 0.06% Manganese above the specified maximum will be permitted, up to a maximum of 1.35%.
  • The sum of Copper, Nickel, Niobium, and Molybdenum shall not exceed 1.00%.
  • The sum of Niobium and Molybdenum shall not exceed 0.32%.

  • Stainless Steel Buttweld Fitting

    Stainless buttweld fittings are available in 316 and 304 grades.

    304 (UNS S30400) / 304L (S30403)/ 316 (UNS S31600) / 316L (S31603)
    Stainless Steel Buttweld Pipe Fitting Chemical Composition (%)

    C

    Cr

    Mn

    Ni

    P

    S

    Si

    MAX

    MAX

    MAX

    MAX

    MAX

    0.035
    0.035

    18.0- 20.0
    16.0- 18.0

    2.00
    2.00

    8.0-13.0
    10.0-14.0

    0.045
    0.045

    0.030
    0.030

    1.00
    1.00

    Tensile Requirements
  • Tensile Strength: (KSI) = 60 & 70
  • Yield Strength: (KSI) = 35 & 25
  • (KSI converts to MPA {Megapascals} by multiplying by 6.895)

  • Buttweld Fitting Beveling

    All welded Buttweld Fittings have bevelled ends to allow for ease of welding. This bevel allows for full penetration weld in most cases.
    There are two types of bevels;-

  • Plain Bevel
  • Compound Bevel
  • Buttweld Fittings Dimension

    Zimbabwe Buttweld Fittings Manufacturer is an International ISO certified and highly professional ASME B16.9 Buttweld Fittings Manufacturer, Suppliers & exporter in Zimbabwe. Stainless Steel, Carbon Steel, Alloy Steel Buttweld Elbow, Tee, Cross, Reducer, Nipple, Pipe Cap, Stubend, Bend Suppliers in Zimbabwe at the Best price.


    ASME / ANSI B16.9 Buttweld Fittings Specifications – Zimbabwe

    Outside Diameter (OD) 1/8” NB TO 48” NB. (Seamless & 100% X-Ray Welded, Fabricated)
    Dimensions ASME/ANSI B16.9, MSS-SP-43 Type A, MSS-SP-43 Type B, JIS B2312, JIS B2313, ASME B16.28
    Type Seamless / Welded / Fabricated – Elbow, Tee, Cross, Reducer, Nipple, Pipe Cap, Stubend, Bend
    Wall Thickness SCH5, SCH10, SCH20, SCH30, SCH40, STD, SCH80, XS, SCH60, SCH80, SCH120, SCH140, SCH160, XXS / 3mm – 40mm
    Buttweld Fittingsing Radius R = 1D, 1.5D, 2D, 3D, 5D, 6D, 8D, 10D
    Product’s Angle 0°~180°
    Value Added Services Hot Dipped Galvanizing, Epoxy & FBE Coating, Electro Polish, Sand Blasting, Threading, Soldering
    Important Grades ASTM A403 WP 304 / 304L / 304H / 316 / 316L / 317 / 317L / 321 / 310 / 347 / 904L
    Production Materials Stainless Steel, Alloy Steel, Carbon Steel, Duplex & Super Duplex Steel, Nickel Alloys, Cupro Nickel, Hastelloy, Titanium, SMO 254, Alloy 20, Inconel


    We are Suppliers of all Types of Buttweld Fittings Products – Zimbabwe


    ASME B16.9 Buttweld Fittings Applications – Zimbabwe

    • Buttweld Fittings For Oil & Gas Industries
    • Buttweld Fittings For Petrochemical Industries
    • Buttweld Fittings For Engineering Industries
    • Buttweld Fittings For Chemical Industries
    • Buttweld Fittings For Sugar & Paper Pulp Industries
    • Buttweld Fittings For Power Generation Industries
    • Buttweld Fittings For Fertilizers & Pesticides Industries
    • Buttweld Fittings For Food Processing & Dairy Industries
    • Buttweld Fittings For Polymer & Textiles Industries
    • Buttweld Fittings For Pharmaceutical Industries
    • Buttweld Fittings For Bio-Pharma Industries



    We are renowned & most acclaimed Manufacturer, Suppliers, Wholesaler, Dealer, Distributor, Importer & Exporter, Fabricator, Stockist of Stainless Steel Buttweld Fittings, Carbon Steel Buttweld Fittings, Alloy Steel Buttweld Fittings, Mild Steel Buttweld Fittings, SMO 254 Buttweld Fittings, Alloy 20 Buttweld Fittings, Inconel Buttweld Fittings, Monel Buttweld Fittings, Nickel Alloy Buttweld Fittings, Hastelloy Buttweld Fittings, Titanium Buttweld Fittings, Duplex Steel Buttweld Fittings, Aluminum Buttweld Fittings, Copper Nickel Buttweld Fittings etc.

    For More Information About Buttweld Fittings Please Call +91 9987994248 or Send an Email to sales@fitwelindia.com


    Exporting Cities Destinations for Buttweld Fittings

    REQUEST A CALL BACK