Equal Tee Fittings Manufacturers in India

Request a Call Back


Equal Tee Fittings Manufacturers & Exporter in Mumbai, India

PED Approved Equal Tee Manufacturer & Suppliers

PED Certified Equal Tee Manufacturer & Suppliers

ASME B16.9 Buttweld Equal Tee

Fit-Wel Industries LLP is a leading ISO 9001:2000 certified Company, has an exhaustive quality control and assessment procedure which takes care that only products that are defect-free and conforms to the set guidelines by respected international agencies. We are a manufacturer, supplier and exporter of Equal Tees, which are also known as 'straight tees'. These tees have a diameter that is similar to the diameter of the main pipe, hence the name 'equal tee'. We furnish SS Butt weld Equal Tees that are installed without much hassle and require less maintenance as well. Being corrosion resistant and give a quick disconnection in case of emergency. We export large quantities of ANSI B16.9 Equal Tees to industries like power plants, breweries, sugar, etc.

What is Equal Tee Fittings?

Equal Tee (or straight tee), means the branch diameter of this tee is same with the main pipe (Run pipe) diameter of this tee. The equivalent tee (or straight tee) is utilised as the branch has the same distance across as the run pipe. There are straight pipe tees which have the same size openings.
An equal tee, otherwise called straight tee, means the branch diameter of this tee is same with the main pipe (Run pipe) diameter of this tee. A pipe tee is defined “equal” when the bore size at the run and branch sides have the same diameter.

A pipe tee is defined “equal” when the bore size at the run and branch sides have the same diameter. An equal tee is, therefore, used to connect two pipes of the same nominal diameter. Equal tees are available in sizes from half an inch to 48 inches (or larger) and in seamless and welded execution (seamless up to 24 inches, welded for tee sizes above 24 inches).

The equivalent tee (or straight tee) is utilised as the branch has the same distance across as the run pipe. Equal Tee are equipped for taking care of any high or low weight stream of fluid through it. The equal tee are with the same channel and outlet sizes, however, customers can profit from us “decreasing” tees too that have maybe a couple closes with various in measurement, this is called an equal tee. Because of their dimensional contrast, these tee fittings help with the ability to control the volume when required. Our scope of Equal Tee and Equal Cross are impeccably built utilising most recent innovation and are generally utilised as a part of differing piping frameworks crosswise over commercial ventures. Faultlessly built to flawlessness utilising most recent machines and innovation, these pipe fittings are broadly utilised as a part of a large number of commercial ventures far and wide. Durable in quality, these pipe fittings are accessible at competitive prices.


What Are The Features Of Equal Tee?

  • There are three female openings in a ‘T’ formed pipe tee.
  • There are straight pipe tees which have the same size openings.
  • Equal tee make them open of various size and two openings of the same size.
  • There are sterile equal tees which are utilised as a part of waste lines.
  • These sort of equal tees have a bent branch which is intended for a wipe outfitting. They are utilised to avoid hindrance of waste.
  • An equal tee has dragged to attach the fitting to a divider or stud.
  • An equal tee utilises pressure fittings on two or more finishes.
  • An equal tee has a strong opening. This opening is utilised as a part of conjunction with a strong fitting for a get out an opening on a drain pipe.


    • ASME B16.9 Buttweld Equal/Straight Tees (NPS 1/2-48) Dimensions

    Equal Tee Dimensions
    NPS O.D.
    D    		 Center to End
    C    		 Center to End
    M
    1/2 21.3 25 25
    3/4 26.7 29 29
    1 33.4 38 38
    1¼ 42.2 48 48
    1½ 48.3 57 57
    2 60.3 64 64
    2½ 73 76 76
    3 88.9 86 86
    3½ 101.6 95 95

    Dimensional Tolerances of ASME B16.9 Buttweld Equal/Straight Tees

    Nominal Pipe Size

    1/2 to 2½

    3 to 3½

    4

    5 to 8

    10 to 18

    20 to 24

    26 to 30

    32 to 48

    Outside Dia
    at Bevel (D)

    +1.6
    -0.8

    1.6

    1.6

    +2.4
    -1.6

    +4
    -3.2

    +6.4
    -4.8

    +6.4
    -4.8

    +6.4
    -4.8

    Inside Dia at End

    0.8

    1.6

    1.6

    1.6

    3.2

    4.8

    +6.4
    -4.8

    +6.4
    -4.8

    Center to End (C / M)

    2

    2

    2

    2

    2

    2

    3

    5

    Wall Thk (t)

    Not less than 87.5% of Nominal Wall Thickness

    Dimensional tolerances are in millimeters unless otherwise indicated and are equal ± except as noted.


    Standard Specification For Buttweld Equal Tee


    Dimensions : ASME/ANSI B16.9, ASME B16.28, MSS-SP-43

    Size : 1/2"NB TO 48"NB IN

    Type : Seamless / ERW / Welded / Fabricated

    Thickness : Schedule 5S, 10S, 20S, S10, S20, S30, STD, 40S, S40, S60, XS, 80S, S80, S100, S120, S140, S160, XXS and etc.

    Form : Equal Tee, Pipe Tee, Butt weld Tee, Barred Tee, Lateral Tee.


    Material & Grades of Buttweld Equal Tee :

    Stainless Steel Buttweld Equal Tee :
    ASTM A403 WP316/316L, ASTM A403 SA / A 774 WP-S, WP-W, WP-WX 304/304L, ASTM A182 F316L, 304L, DIN 1.4301, DIN1.4306, DIN 1.4401, DIN 1.4404

    Duplex & Super Duplex Steel Buttweld Equal Tee :
    ASTM A 815, ASME SA 815 UNS NO S31803, S32205. UNS S32750, S32950. Werkstoff No. 1.4462

    Carbon Steel Buttweld Equal Tee :
    ASTM A234, ASME SA234 WPB , WPBW, WPHY 42, WPHY 46, WPHY 52, WPH 60, WPHY 65 & WPHY 70.

    Low Temperature Carbon Steel Buttweld Equal Tee : ASTM A420 WPL3, A420 WPL6

    Alloy Steel Buttweld Equal Tee :
    ASTM / ASME A/SA 234 Gr. WP 1, WP 5, WP 9, WP 11, WP 12, WP 22, WP 91

    Nickel Alloy Buttweld Equal Tee :
    ASTM B336, ASME SB336, Nickel 200 (UNS No. No2200), Nickel 201 (UNS No. N02201), Monel 400 (UNS No. N04400), Monel 500 (UNS No. N05500), Inconel 800 (UNS No. N08800), Inconel 825 (UNS No. N08825), Inconel 600 (UNS No. N06600), Inconel 625 (UNS No. N06625), Inconel 601 (UNS No. N06601), Hastelloy C 276 (UNS No. N10276), Alloy 20 (UNS No. N08020), Titanium (Grade I & II), Cupro-Nickel 70/30, CuNi10Fe1Mn, CuNi30Mn1Fe.


    ASME B16.9 Buttweld Equal Tees Available Types

    Buttweld Equal Tee Butt Weld Tees
    ASME B16.9 Butt weld Equal Tee Steel Tee Pipe Fittings
    Stainless Steel Equal Tee Suppliers SS Equal Tees
    ANSI B16.9 Buttweld Tee Dealer ASME B16.28 Buttweld Pipe Tees Exporter
    Welded Butt weld Equal Tee Stockholder Seamless Butt weld Equal Tee Distributors
    Carbon Steel Lateral Tee High Quality Equal Tee Manufacturer
    ASTM A403 Stainless Steel Equal Tees Duplex Steel Buttweld Tee
    Super Duplex Steel Buttweld Tee Copper Nickel Equal Tee
    High Nickel Alloy Equal Tee Hastelloy Pipe Tees Stockist
    Titanium Buttweld Tee Inconel Butt weld Barred Tee


    Call@ 09987994248. The global leader of ANSI/ASME B16.9 Equal Tee & Straight Tee Fitting Manufacturer, Suppliers, Dealers & Exporter in Mumbai, India, which is available in all sizes, dimensions, & having features like Strong Construction, Easy to move, Perfect functioning @ best price.

    Other Names: Pipe Tee Fitings, buttweld Tee Fittings, Equal Tee Fitting, Unequal/Reducing Tee

    Material: Stainless Steel, Carbon Steel, Alloy Steel & High Nickel Grade

    Brand: Fitwel Industries LLP

    Manufacturer: Fitwel Industries LLP

    Suppliers & Exporter: Fitwel Industries LLP

    Rating: 4.7/5 based on 119 customer reviews

    Stainless Steel Buttweld Equal Tee Application

    ASME B16.9 buttweld Equal Tee are known to deliver exceptional performance and are generally developed for meeting the demands. We offer a broad range of buttweld Equal Tee through a worldwide network of stock-keeping branches. These Buttweld Equal Tee is used in various industries like:

  • Equal Tee For Oil & Gas Industries
  • Equal Tee For Petrochemical Industries
  • Equal Tee For Engineering Industries
  • Equal Tee For Chemical Industries
  • Equal Tee For Sugar Industries
  • Equal Tee For Power Generation Industries
  • Equal Tee For Fertilizers Industries
  • Equal Tee For Food Processing Industries
  • Equal Tee For Polymer Industries
  • Equal Tee For Dairy Industries
  • Equal Tee For Bio-Pharma Industries

    • Pipe Equal Tee Manufacturers World Wide

    Below, We are having existence in countries below for Equal Tee

    • We are the leading manufacturer and supplier of Equal Tee in Dubai & Equal Tee in United Arab Emirates. Get the best offer for high-quality Equal Tee from us in Dubai, UAE. We have plenty of stock of Equal Tee in the UAE. Place your order online for Equal Tee in Dubai, United Arab Emirates. We are the leading Equal Tee manufacturer in Dubai and Equal Tee manufacturer in UAE. Get your best quality Equal Tee in Dubai. Our Equal Tee Buttweld Pipe Fittings are manufactures with dissimilar grades of standard ranges and meets its provisions through international and national standards. Fitwel Industries LLP manufactures buttweld steel pipe tee fittings from stainless steel pipe tee fitting, carbon steel pipe tee fitting, aluminum pipe tee fitting, mild steel pipe tee fitting, alloy steel pipe tee fitting, mild steel pipe tee fitting, Hastelloy pipe tee fitting, Monel pipe tee fitting, nickel pipe tee fitting, Inconel pipe tee fitting, and all other available alloys in all schedules. A pipe fitting can be called a pipe tee whenever it is a 3-way pipe fitting, the most common type of pipe fitting as it is used to combine and/or split the flow of fluid as well as to change directions. We supply straight tees (equal tees) and reducing tees (unequal tees) to pipe fitting distributors throughout the Mumbai, India. Visit our laterals page to learn more about lateral tees.

      Available in:

      Standard and non-standard ANSI dimensions

      All schedules and alloys including carbon steel, aluminum, stainless steel, and others.

      Sizes:1″ thru 24″

      End Prep:

      1. Square cut
      2. 37 1/2 Beveled
      3. Roll Groove
      4. Cut Groove
      5. Flanged Ends

        6. Specification of Equal Tee

        1. Dimensions : ANSI/ASME B16.9, B16.28, MSS-SP-43.
        2. Thickness : Schedule 5S, 10S, 20S, S10, S20, S30, STD, 40S, S40, S60, XS, 80S, S80, S100, S120, S140, S160, XXS and etc.
        3. Size : Seamless ( 1/2″～24″), ERW / Welded / Fabricated Elbow (1/2″～48″)
        4. Type : Seamless / Welded / Fabricated
        5. Form : Straight Tee, Pipe Tee, Equal Tee
        6. Standard: ANSI/ASME, MSS, JIS, DIN, BS, etc.

        Grade of Equal Tee

        1. stainless steel Equal Tee, carbon steel Equal Tee, alloy steel Equal Tee, mild steel Equal Tee : ASTM A403 WP Gr. 304, 304H, 309, 310, 316, 316L, 317L, 321, 347, 904L
        2. Carbon Steel Equal Tee: ASTM A 234 WPB, WPBW, WPHY 42, WPHY 46, WPHY 52, WPH 60, WPHY 65 & WPHY 70.
        3. Low Temperature Carbon Steel Equal Tee: ASTM A420 WPL3, A420 WPL6
        4. Alloy Steel Equal Tee: ASTM / ASME A/SA 234 Gr. WP 1, WP 5, WP 9, WP 11, WP 12, WP 22, WP 91
        5. Duplex Steel Equal Tee : ASTM A 815, ASME SA 815 UNS NO S31803, S32205. Worst-off No. 1.4462
        6. Nickel Alloy Equal Tee : ASTM / ASME SB 336 UNS 2200 ( NICKEL 200 ), UNS 2201 (NICKEL 201 ), UNS 4400 (MONEL 400 ), UNS 8020 ( ALLOY 20 / 20 CB 3, UNS 8825 INCONEL (825), UNS 6600 (INCONEL 600 ), UNS 6601 ( INCONEL 601 ), UNS 6625 (INCONEL 625), UNS 10276 ( HASTELLOY C 276 )

    • We are the leading manufacturer and supplier of Equal Tee in Singapore. Get the best offer for high-quality Equal Tee from us in Singapore. We have plenty of stock of Equal Tee in the Singapore. Place your order online for Equal Tee in Singapore. We are the leading Equal Tee manufacturer in Singapore. Get your best quality Equal Tee in Singapore. Our Equal Tee Buttweld Pipe Fittings are manufactures with dissimilar grades of standard ranges and meets its provisions through international and national standards. Fitwel Industries LLP manufactures buttweld steel pipe tee fittings from stainless steel pipe tee fitting, carbon steel pipe tee fitting, aluminum pipe tee fitting, mild steel pipe tee fitting, alloy steel pipe tee fitting, mild steel pipe tee fitting, Hastelloy pipe tee fitting, Monel pipe tee fitting, nickel pipe tee fitting, Inconel pipe tee fitting, and all other available alloys in all schedules. A pipe fitting can be called a pipe tee whenever it is a 3-way pipe fitting, the most common type of pipe fitting as it is used to combine and/or split the flow of fluid as well as to change directions. We supply straight tees (equal tees) and reducing tees (unequal tees) to pipe fitting distributors throughout the Mumbai, India. Visit our laterals page to learn more about lateral tees.

      Available in:

      Standard and non-standard ANSI dimensions

      All schedules and alloys including carbon steel, aluminum, stainless steel, and others.

      Sizes:1″ thru 24″

      End Prep:

      1. Square cut
      2. 37 1/2 Beveled
      3. Roll Groove
      4. Cut Groove
      5. Flanged Ends

        6. Specification of Equal Tee

        1. Dimensions : ANSI/ASME B16.9, B16.28, MSS-SP-43.
        2. Thickness : Schedule 5S, 10S, 20S, S10, S20, S30, STD, 40S, S40, S60, XS, 80S, S80, S100, S120, S140, S160, XXS and etc.
        3. Size : Seamless ( 1/2″～24″), ERW / Welded / Fabricated Elbow (1/2″～48″)
        4. Type : Seamless / Welded / Fabricated
        5. Form : Straight Tee, Pipe Tee, Equal Tee
        6. Standard: ANSI/ASME, MSS, JIS, DIN, BS, etc.

        Grade of Equal Tee

        1. stainless steel Equal Tee, carbon steel Equal Tee, alloy steel Equal Tee, mild steel Equal Tee : ASTM A403 WP Gr. 304, 304H, 309, 310, 316, 316L, 317L, 321, 347, 904L
        2. Carbon Steel Equal Tee: ASTM A 234 WPB, WPBW, WPHY 42, WPHY 46, WPHY 52, WPH 60, WPHY 65 & WPHY 70.
        3. Low Temperature Carbon Steel Equal Tee: ASTM A420 WPL3, A420 WPL6
        4. Alloy Steel Equal Tee: ASTM / ASME A/SA 234 Gr. WP 1, WP 5, WP 9, WP 11, WP 12, WP 22, WP 91
        5. Duplex Steel Equal Tee : ASTM A 815, ASME SA 815 UNS NO S31803, S32205. Worst-off No. 1.4462
        6. Nickel Alloy Equal Tee : ASTM / ASME SB 336 UNS 2200 ( NICKEL 200 ), UNS 2201 (NICKEL 201 ), UNS 4400 (MONEL 400 ), UNS 8020 ( ALLOY 20 / 20 CB 3, UNS 8825 INCONEL (825), UNS 6600 (INCONEL 600 ), UNS 6601 ( INCONEL 601 ), UNS 6625 (INCONEL 625), UNS 10276 ( HASTELLOY C 276 )

    • We are the leading manufacturer and supplier of Equal Tee in Oman. Get the best offer for high-quality Equal Tee from us in Oman. We have plenty of stock of Equal Tee in the Oman. Place your order online for Equal Tee in Oman. We are the leading Equal Tee manufacturer in Oman. Get your best quality Equal Tee in Oman. Our Equal Tee Buttweld Pipe Fittings are manufactures with dissimilar grades of standard ranges and meets its provisions through international and national standards. Fitwel Industries LLP manufactures buttweld steel pipe tee fittings from stainless steel pipe tee fitting, carbon steel pipe tee fitting, aluminum pipe tee fitting, mild steel pipe tee fitting, alloy steel pipe tee fitting, mild steel pipe tee fitting, Hastelloy pipe tee fitting, Monel pipe tee fitting, nickel pipe tee fitting, Inconel pipe tee fitting, and all other available alloys in all schedules. A pipe fitting can be called a pipe tee whenever it is a 3-way pipe fitting, the most common type of pipe fitting as it is used to combine and/or split the flow of fluid as well as to change directions. We supply straight tees (equal tees) and reducing tees (unequal tees) to pipe fitting distributors throughout the Mumbai, India. Visit our laterals page to learn more about lateral tees.

      Available in:

      Standard and non-standard ANSI dimensions

      All schedules and alloys including carbon steel, aluminum, stainless steel, and others.

      Sizes:1″ thru 24″

      End Prep:

      1. Square cut
      2. 37 1/2 Beveled
      3. Roll Groove
      4. Cut Groove
      5. Flanged Ends

        6. Specification of Equal Tee

        1. Dimensions : ANSI/ASME B16.9, B16.28, MSS-SP-43.
        2. Thickness : Schedule 5S, 10S, 20S, S10, S20, S30, STD, 40S, S40, S60, XS, 80S, S80, S100, S120, S140, S160, XXS and etc.
        3. Size : Seamless ( 1/2″～24″), ERW / Welded / Fabricated Elbow (1/2″～48″)
        4. Type : Seamless / Welded / Fabricated
        5. Form : Straight Tee, Pipe Tee, Equal Tee
        6. Standard: ANSI/ASME, MSS, JIS, DIN, BS, etc.

        Grade of Equal Tee

        1. stainless steel Equal Tee, carbon steel Equal Tee, alloy steel Equal Tee, mild steel Equal Tee : ASTM A403 WP Gr. 304, 304H, 309, 310, 316, 316L, 317L, 321, 347, 904L
        2. Carbon Steel Equal Tee: ASTM A 234 WPB, WPBW, WPHY 42, WPHY 46, WPHY 52, WPH 60, WPHY 65 & WPHY 70.
        3. Low Temperature Carbon Steel Equal Tee: ASTM A420 WPL3, A420 WPL6
        4. Alloy Steel Equal Tee: ASTM / ASME A/SA 234 Gr. WP 1, WP 5, WP 9, WP 11, WP 12, WP 22, WP 91
        5. Duplex Steel Equal Tee : ASTM A 815, ASME SA 815 UNS NO S31803, S32205. Worst-off No. 1.4462
        6. Nickel Alloy Equal Tee : ASTM / ASME SB 336 UNS 2200 ( NICKEL 200 ), UNS 2201 (NICKEL 201 ), UNS 4400 (MONEL 400 ), UNS 8020 ( ALLOY 20 / 20 CB 3, UNS 8825 INCONEL (825), UNS 6600 (INCONEL 600 ), UNS 6601 ( INCONEL 601 ), UNS 6625 (INCONEL 625), UNS 10276 ( HASTELLOY C 276 )

    • We are the leading manufacturer and supplier of Equal Tee in Italy. Get the best offer for high-quality Equal Tee from us in Italy. We have plenty of stock of Equal Tee in the Italy. Place your order online for Equal Tee in Italy. We are the leading Equal Tee manufacturer in Italy. Get your best quality Equal Tee in Italy. Our Equal Tee Buttweld Pipe Fittings are manufactures with dissimilar grades of standard ranges and meets its provisions through international and national standards. Fitwel Industries LLP manufactures buttweld steel pipe tee fittings from stainless steel pipe tee fitting, carbon steel pipe tee fitting, aluminum pipe tee fitting, mild steel pipe tee fitting, alloy steel pipe tee fitting, mild steel pipe tee fitting, Hastelloy pipe tee fitting, Monel pipe tee fitting, nickel pipe tee fitting, Inconel pipe tee fitting, and all other available alloys in all schedules. A pipe fitting can be called a pipe tee whenever it is a 3-way pipe fitting, the most common type of pipe fitting as it is used to combine and/or split the flow of fluid as well as to change directions. We supply straight tees (equal tees) and reducing tees (unequal tees) to pipe fitting distributors throughout the Mumbai, India. Visit our laterals page to learn more about lateral tees.

      Available in:

      Standard and non-standard ANSI dimensions

      All schedules and alloys including carbon steel, aluminum, stainless steel, and others.

      Sizes:1″ thru 24″

      End Prep:

      1. Square cut
      2. 37 1/2 Beveled
      3. Roll Groove
      4. Cut Groove
      5. Flanged Ends

        6. Specification of Equal Tee

        1. Dimensions : ANSI/ASME B16.9, B16.28, MSS-SP-43.
        2. Thickness : Schedule 5S, 10S, 20S, S10, S20, S30, STD, 40S, S40, S60, XS, 80S, S80, S100, S120, S140, S160, XXS and etc.
        3. Size : Seamless ( 1/2″～24″), ERW / Welded / Fabricated Elbow (1/2″～48″)
        4. Type : Seamless / Welded / Fabricated
        5. Form : Straight Tee, Pipe Tee, Equal Tee
        6. Standard: ANSI/ASME, MSS, JIS, DIN, BS, etc.

        Grade of Equal Tee

        1. stainless steel Equal Tee, carbon steel Equal Tee, alloy steel Equal Tee, mild steel Equal Tee : ASTM A403 WP Gr. 304, 304H, 309, 310, 316, 316L, 317L, 321, 347, 904L
        2. Carbon Steel Equal Tee: ASTM A 234 WPB, WPBW, WPHY 42, WPHY 46, WPHY 52, WPH 60, WPHY 65 & WPHY 70.
        3. Low Temperature Carbon Steel Equal Tee: ASTM A420 WPL3, A420 WPL6
        4. Alloy Steel Equal Tee: ASTM / ASME A/SA 234 Gr. WP 1, WP 5, WP 9, WP 11, WP 12, WP 22, WP 91
        5. Duplex Steel Equal Tee : ASTM A 815, ASME SA 815 UNS NO S31803, S32205. Worst-off No. 1.4462
        6. Nickel Alloy Equal Tee : ASTM / ASME SB 336 UNS 2200 ( NICKEL 200 ), UNS 2201 (NICKEL 201 ), UNS 4400 (MONEL 400 ), UNS 8020 ( ALLOY 20 / 20 CB 3, UNS 8825 INCONEL (825), UNS 6600 (INCONEL 600 ), UNS 6601 ( INCONEL 601 ), UNS 6625 (INCONEL 625), UNS 10276 ( HASTELLOY C 276 )

    • We are the leading manufacturer and supplier of Equal Tee in Qatar. Get the best offer for high-quality Equal Tee from us in Qatar. We have plenty of stock of Equal Tee in the Qatar. Place your order online for Equal Tee in Qatar. We are the leading Equal Tee manufacturer in Qatar. Get your best quality Equal Tee in Qatar. Our Equal Tee Buttweld Pipe Fittings are manufactures with dissimilar grades of standard ranges and meets its provisions through international and national standards. Fitwel Industries LLP manufactures buttweld steel pipe tee fittings from stainless steel pipe tee fitting, carbon steel pipe tee fitting, aluminum pipe tee fitting, mild steel pipe tee fitting, alloy steel pipe tee fitting, mild steel pipe tee fitting, Hastelloy pipe tee fitting, Monel pipe tee fitting, nickel pipe tee fitting, Inconel pipe tee fitting, and all other available alloys in all schedules. A pipe fitting can be called a pipe tee whenever it is a 3-way pipe fitting, the most common type of pipe fitting as it is used to combine and/or split the flow of fluid as well as to change directions. We supply straight tees (equal tees) and reducing tees (unequal tees) to pipe fitting distributors throughout the Mumbai, India. Visit our laterals page to learn more about lateral tees.

      Available in:

      Standard and non-standard ANSI dimensions

      All schedules and alloys including carbon steel, aluminum, stainless steel, and others.

      Sizes:1″ thru 24″

      End Prep:

      1. Square cut
      2. 37 1/2 Beveled
      3. Roll Groove
      4. Cut Groove
      5. Flanged Ends

        6. Specification of Equal Tee

        1. Dimensions : ANSI/ASME B16.9, B16.28, MSS-SP-43.
        2. Thickness : Schedule 5S, 10S, 20S, S10, S20, S30, STD, 40S, S40, S60, XS, 80S, S80, S100, S120, S140, S160, XXS and etc.
        3. Size : Seamless ( 1/2″～24″), ERW / Welded / Fabricated Elbow (1/2″～48″)
        4. Type : Seamless / Welded / Fabricated
        5. Form : Straight Tee, Pipe Tee, Equal Tee
        6. Standard: ANSI/ASME, MSS, JIS, DIN, BS, etc.

        Grade of Equal Tee

        1. stainless steel Equal Tee, carbon steel Equal Tee, alloy steel Equal Tee, mild steel Equal Tee : ASTM A403 WP Gr. 304, 304H, 309, 310, 316, 316L, 317L, 321, 347, 904L
        2. Carbon Steel Equal Tee: ASTM A 234 WPB, WPBW, WPHY 42, WPHY 46, WPHY 52, WPH 60, WPHY 65 & WPHY 70.
        3. Low Temperature Carbon Steel Equal Tee: ASTM A420 WPL3, A420 WPL6
        4. Alloy Steel Equal Tee: ASTM / ASME A/SA 234 Gr. WP 1, WP 5, WP 9, WP 11, WP 12, WP 22, WP 91
        5. Duplex Steel Equal Tee : ASTM A 815, ASME SA 815 UNS NO S31803, S32205. Worst-off No. 1.4462
        6. Nickel Alloy Equal Tee : ASTM / ASME SB 336 UNS 2200 ( NICKEL 200 ), UNS 2201 (NICKEL 201 ), UNS 4400 (MONEL 400 ), UNS 8020 ( ALLOY 20 / 20 CB 3, UNS 8825 INCONEL (825), UNS 6600 (INCONEL 600 ), UNS 6601 ( INCONEL 601 ), UNS 6625 (INCONEL 625), UNS 10276 ( HASTELLOY C 276 )

    • We are the leading manufacturer and supplier of Equal Tee in Australia. Get the best offer for high-quality Equal Tee from us in Australia. We have plenty of stock of Equal Tee in the Australia. Place your order online for Equal Tee in Australia. We are the leading Equal Tee manufacturer in Australia. Get your best quality Equal Tee in Australia. Our Equal Tee Buttweld Pipe Fittings are manufactures with dissimilar grades of standard ranges and meets its provisions through international and national standards. Fitwel Industries LLP manufactures buttweld steel pipe tee fittings from stainless steel pipe tee fitting, carbon steel pipe tee fitting, aluminum pipe tee fitting, mild steel pipe tee fitting, alloy steel pipe tee fitting, mild steel pipe tee fitting, Hastelloy pipe tee fitting, Monel pipe tee fitting, nickel pipe tee fitting, Inconel pipe tee fitting, and all other available alloys in all schedules. A pipe fitting can be called a pipe tee whenever it is a 3-way pipe fitting, the most common type of pipe fitting as it is used to combine and/or split the flow of fluid as well as to change directions. We supply straight tees (equal tees) and reducing tees (unequal tees) to pipe fitting distributors throughout the Mumbai, India. Visit our laterals page to learn more about lateral tees.

      Available in:

      Standard and non-standard ANSI dimensions

      All schedules and alloys including carbon steel, aluminum, stainless steel, and others.

      Sizes:1″ thru 24″

      End Prep:

      1. Square cut
      2. 37 1/2 Beveled
      3. Roll Groove
      4. Cut Groove
      5. Flanged Ends

        6. Specification of Equal Tee

        1. Dimensions : ANSI/ASME B16.9, B16.28, MSS-SP-43.
        2. Thickness : Schedule 5S, 10S, 20S, S10, S20, S30, STD, 40S, S40, S60, XS, 80S, S80, S100, S120, S140, S160, XXS and etc.
        3. Size : Seamless ( 1/2″～24″), ERW / Welded / Fabricated Elbow (1/2″～48″)
        4. Type : Seamless / Welded / Fabricated
        5. Form : Straight Tee, Pipe Tee, Equal Tee
        6. Standard: ANSI/ASME, MSS, JIS, DIN, BS, etc.

        Grade of Equal Tee

        1. stainless steel Equal Tee, carbon steel Equal Tee, alloy steel Equal Tee, mild steel Equal Tee : ASTM A403 WP Gr. 304, 304H, 309, 310, 316, 316L, 317L, 321, 347, 904L
        2. Carbon Steel Equal Tee: ASTM A 234 WPB, WPBW, WPHY 42, WPHY 46, WPHY 52, WPH 60, WPHY 65 & WPHY 70.
        3. Low Temperature Carbon Steel Equal Tee: ASTM A420 WPL3, A420 WPL6
        4. Alloy Steel Equal Tee: ASTM / ASME A/SA 234 Gr. WP 1, WP 5, WP 9, WP 11, WP 12, WP 22, WP 91
        5. Duplex Steel Equal Tee : ASTM A 815, ASME SA 815 UNS NO S31803, S32205. Worst-off No. 1.4462
        6. Nickel Alloy Equal Tee : ASTM / ASME SB 336 UNS 2200 ( NICKEL 200 ), UNS 2201 (NICKEL 201 ), UNS 4400 (MONEL 400 ), UNS 8020 ( ALLOY 20 / 20 CB 3, UNS 8825 INCONEL (825), UNS 6600 (INCONEL 600 ), UNS 6601 ( INCONEL 601 ), UNS 6625 (INCONEL 625), UNS 10276 ( HASTELLOY C 276 )

    • We are the leading manufacturer and supplier of Equal Tee in New zealand. Get the best offer for high-quality Equal Tee from us in New zealand. We have plenty of stock of Equal Tee in the New zealand. Place your order online for Equal Tee in New zealand. We are the leading Equal Tee manufacturer in New zealand. Get your best quality Equal Tee in New zealand. Our Equal Tee Buttweld Pipe Fittings are manufactures with dissimilar grades of standard ranges and meets its provisions through international and national standards. Fitwel Industries LLP manufactures buttweld steel pipe tee fittings from stainless steel pipe tee fitting, carbon steel pipe tee fitting, aluminum pipe tee fitting, mild steel pipe tee fitting, alloy steel pipe tee fitting, mild steel pipe tee fitting, Hastelloy pipe tee fitting, Monel pipe tee fitting, nickel pipe tee fitting, Inconel pipe tee fitting, and all other available alloys in all schedules. A pipe fitting can be called a pipe tee whenever it is a 3-way pipe fitting, the most common type of pipe fitting as it is used to combine and/or split the flow of fluid as well as to change directions. We supply straight tees (equal tees) and reducing tees (unequal tees) to pipe fitting distributors throughout the Mumbai, India. Visit our laterals page to learn more about lateral tees.

      Available in:

      Standard and non-standard ANSI dimensions

      All schedules and alloys including carbon steel, aluminum, stainless steel, and others.

      Sizes:1″ thru 24″

      End Prep:

      1. Square cut
      2. 37 1/2 Beveled
      3. Roll Groove
      4. Cut Groove
      5. Flanged Ends

        6. Specification of Equal Tee

        1. Dimensions : ANSI/ASME B16.9, B16.28, MSS-SP-43.
        2. Thickness : Schedule 5S, 10S, 20S, S10, S20, S30, STD, 40S, S40, S60, XS, 80S, S80, S100, S120, S140, S160, XXS and etc.
        3. Size : Seamless ( 1/2″～24″), ERW / Welded / Fabricated Elbow (1/2″～48″)
        4. Type : Seamless / Welded / Fabricated
        5. Form : Straight Tee, Pipe Tee, Equal Tee
        6. Standard: ANSI/ASME, MSS, JIS, DIN, BS, etc.

        Grade of Equal Tee

        1. stainless steel Equal Tee, carbon steel Equal Tee, alloy steel Equal Tee, mild steel Equal Tee : ASTM A403 WP Gr. 304, 304H, 309, 310, 316, 316L, 317L, 321, 347, 904L
        2. Carbon Steel Equal Tee: ASTM A 234 WPB, WPBW, WPHY 42, WPHY 46, WPHY 52, WPH 60, WPHY 65 & WPHY 70.
        3. Low Temperature Carbon Steel Equal Tee: ASTM A420 WPL3, A420 WPL6
        4. Alloy Steel Equal Tee: ASTM / ASME A/SA 234 Gr. WP 1, WP 5, WP 9, WP 11, WP 12, WP 22, WP 91
        5. Duplex Steel Equal Tee : ASTM A 815, ASME SA 815 UNS NO S31803, S32205. Worst-off No. 1.4462
        6. Nickel Alloy Equal Tee : ASTM / ASME SB 336 UNS 2200 ( NICKEL 200 ), UNS 2201 (NICKEL 201 ), UNS 4400 (MONEL 400 ), UNS 8020 ( ALLOY 20 / 20 CB 3, UNS 8825 INCONEL (825), UNS 6600 (INCONEL 600 ), UNS 6601 ( INCONEL 601 ), UNS 6625 (INCONEL 625), UNS 10276 ( HASTELLOY C 276 )

    • We are the leading manufacturer and supplier of Equal Tee in Saudi Arabia. Get the best offer for high-quality Equal Tee from us in Saudi Arabia. We have plenty of stock of Equal Tee in the Saudi Arabia. Place your order online for Equal Tee in Saudi Arabia. We are the leading Equal Tee manufacturer in Saudi Arabia. Get your best quality Equal Tee in Saudi Arabia. Our Equal Tee Buttweld Pipe Fittings are manufactures with dissimilar grades of standard ranges and meets its provisions through international and national standards. Fitwel Industries LLP manufactures buttweld steel pipe tee fittings from stainless steel pipe tee fitting, carbon steel pipe tee fitting, aluminum pipe tee fitting, mild steel pipe tee fitting, alloy steel pipe tee fitting, mild steel pipe tee fitting, Hastelloy pipe tee fitting, Monel pipe tee fitting, nickel pipe tee fitting, Inconel pipe tee fitting, and all other available alloys in all schedules. A pipe fitting can be called a pipe tee whenever it is a 3-way pipe fitting, the most common type of pipe fitting as it is used to combine and/or split the flow of fluid as well as to change directions. We supply straight tees (equal tees) and reducing tees (unequal tees) to pipe fitting distributors throughout the Mumbai, India. Visit our laterals page to learn more about lateral tees.

      Available in:

      Standard and non-standard ANSI dimensions

      All schedules and alloys including carbon steel, aluminum, stainless steel, and others.

      Sizes:1″ thru 24″

      End Prep:

      1. Square cut
      2. 37 1/2 Beveled
      3. Roll Groove
      4. Cut Groove
      5. Flanged Ends

        6. Specification of Equal Tee

        1. Dimensions : ANSI/ASME B16.9, B16.28, MSS-SP-43.
        2. Thickness : Schedule 5S, 10S, 20S, S10, S20, S30, STD, 40S, S40, S60, XS, 80S, S80, S100, S120, S140, S160, XXS and etc.
        3. Size : Seamless ( 1/2″～24″), ERW / Welded / Fabricated Elbow (1/2″～48″)
        4. Type : Seamless / Welded / Fabricated
        5. Form : Straight Tee, Pipe Tee, Equal Tee
        6. Standard: ANSI/ASME, MSS, JIS, DIN, BS, etc.

        Grade of Equal Tee

        1. stainless steel Equal Tee, carbon steel Equal Tee, alloy steel Equal Tee, mild steel Equal Tee : ASTM A403 WP Gr. 304, 304H, 309, 310, 316, 316L, 317L, 321, 347, 904L
        2. Carbon Steel Equal Tee: ASTM A 234 WPB, WPBW, WPHY 42, WPHY 46, WPHY 52, WPH 60, WPHY 65 & WPHY 70.
        3. Low Temperature Carbon Steel Equal Tee: ASTM A420 WPL3, A420 WPL6
        4. Alloy Steel Equal Tee: ASTM / ASME A/SA 234 Gr. WP 1, WP 5, WP 9, WP 11, WP 12, WP 22, WP 91
        5. Duplex Steel Equal Tee : ASTM A 815, ASME SA 815 UNS NO S31803, S32205. Worst-off No. 1.4462
        6. Nickel Alloy Equal Tee : ASTM / ASME SB 336 UNS 2200 ( NICKEL 200 ), UNS 2201 (NICKEL 201 ), UNS 4400 (MONEL 400 ), UNS 8020 ( ALLOY 20 / 20 CB 3, UNS 8825 INCONEL (825), UNS 6600 (INCONEL 600 ), UNS 6601 ( INCONEL 601 ), UNS 6625 (INCONEL 625), UNS 10276 ( HASTELLOY C 276 )

    • We are the leading manufacturer and supplier of Equal Tee in Bahrain. Get the best offer for high-quality Equal Tee from us in Bahrain. We have plenty of stock of Equal Tee in the Bahrain. Place your order online for Equal Tee in Bahrain. We are the leading Equal Tee manufacturer in Bahrain. Get your best quality Equal Tee in Bahrain. Our Equal Tee Buttweld Pipe Fittings are manufactures with dissimilar grades of standard ranges and meets its provisions through international and national standards. Fitwel Industries LLP manufactures buttweld steel pipe tee fittings from stainless steel pipe tee fitting, carbon steel pipe tee fitting, aluminum pipe tee fitting, mild steel pipe tee fitting, alloy steel pipe tee fitting, mild steel pipe tee fitting, Hastelloy pipe tee fitting, Monel pipe tee fitting, nickel pipe tee fitting, Inconel pipe tee fitting, and all other available alloys in all schedules. A pipe fitting can be called a pipe tee whenever it is a 3-way pipe fitting, the most common type of pipe fitting as it is used to combine and/or split the flow of fluid as well as to change directions. We supply straight tees (equal tees) and reducing tees (unequal tees) to pipe fitting distributors throughout the Mumbai, India. Visit our laterals page to learn more about lateral tees.

      Available in:

      Standard and non-standard ANSI dimensions

      All schedules and alloys including carbon steel, aluminum, stainless steel, and others.

      Sizes:1″ thru 24″

      End Prep:

      1. Square cut
      2. 37 1/2 Beveled
      3. Roll Groove
      4. Cut Groove
      5. Flanged Ends

        6. Specification of Equal Tee

        1. Dimensions : ANSI/ASME B16.9, B16.28, MSS-SP-43.
        2. Thickness : Schedule 5S, 10S, 20S, S10, S20, S30, STD, 40S, S40, S60, XS, 80S, S80, S100, S120, S140, S160, XXS and etc.
        3. Size : Seamless ( 1/2″～24″), ERW / Welded / Fabricated Elbow (1/2″～48″)
        4. Type : Seamless / Welded / Fabricated
        5. Form : Straight Tee, Pipe Tee, Equal Tee
        6. Standard: ANSI/ASME, MSS, JIS, DIN, BS, etc.

        Grade of Equal Tee

        1. stainless steel Equal Tee, carbon steel Equal Tee, alloy steel Equal Tee, mild steel Equal Tee : ASTM A403 WP Gr. 304, 304H, 309, 310, 316, 316L, 317L, 321, 347, 904L
        2. Carbon Steel Equal Tee: ASTM A 234 WPB, WPBW, WPHY 42, WPHY 46, WPHY 52, WPH 60, WPHY 65 & WPHY 70.
        3. Low Temperature Carbon Steel Equal Tee: ASTM A420 WPL3, A420 WPL6
        4. Alloy Steel Equal Tee: ASTM / ASME A/SA 234 Gr. WP 1, WP 5, WP 9, WP 11, WP 12, WP 22, WP 91
        5. Duplex Steel Equal Tee : ASTM A 815, ASME SA 815 UNS NO S31803, S32205. Worst-off No. 1.4462
        6. Nickel Alloy Equal Tee : ASTM / ASME SB 336 UNS 2200 ( NICKEL 200 ), UNS 2201 (NICKEL 201 ), UNS 4400 (MONEL 400 ), UNS 8020 ( ALLOY 20 / 20 CB 3, UNS 8825 INCONEL (825), UNS 6600 (INCONEL 600 ), UNS 6601 ( INCONEL 601 ), UNS 6625 (INCONEL 625), UNS 10276 ( HASTELLOY C 276 )

    • We are the leading manufacturer and supplier of Equal Tee in UK. Get the best offer for high-quality Equal Tee from us in UK. We have plenty of stock of Equal Tee in the UK. Place your order online for Equal Tee in UK. We are the leading Equal Tee manufacturer in UK. Get your best quality Equal Tee in UK. Our Equal Tee Buttweld Pipe Fittings are manufactures with dissimilar grades of standard ranges and meets its provisions through international and national standards. Fitwel Industries LLP manufactures buttweld steel pipe tee fittings from stainless steel pipe tee fitting, carbon steel pipe tee fitting, aluminum pipe tee fitting, mild steel pipe tee fitting, alloy steel pipe tee fitting, mild steel pipe tee fitting, Hastelloy pipe tee fitting, Monel pipe tee fitting, nickel pipe tee fitting, Inconel pipe tee fitting, and all other available alloys in all schedules. A pipe fitting can be called a pipe tee whenever it is a 3-way pipe fitting, the most common type of pipe fitting as it is used to combine and/or split the flow of fluid as well as to change directions. We supply straight tees (equal tees) and reducing tees (unequal tees) to pipe fitting distributors throughout the Mumbai, India. Visit our laterals page to learn more about lateral tees.

      Available in:

      Standard and non-standard ANSI dimensions

      All schedules and alloys including carbon steel, aluminum, stainless steel, and others.

      Sizes:1″ thru 24″

      End Prep:

      1. Square cut
      2. 37 1/2 Beveled
      3. Roll Groove
      4. Cut Groove
      5. Flanged Ends

        6. Specification of Equal Tee

        1. Dimensions : ANSI/ASME B16.9, B16.28, MSS-SP-43.
        2. Thickness : Schedule 5S, 10S, 20S, S10, S20, S30, STD, 40S, S40, S60, XS, 80S, S80, S100, S120, S140, S160, XXS and etc.
        3. Size : Seamless ( 1/2″～24″), ERW / Welded / Fabricated Elbow (1/2″～48″)
        4. Type : Seamless / Welded / Fabricated
        5. Form : Straight Tee, Pipe Tee, Equal Tee
        6. Standard: ANSI/ASME, MSS, JIS, DIN, BS, etc.

        Grade of Equal Tee

        1. stainless steel Equal Tee, carbon steel Equal Tee, alloy steel Equal Tee, mild steel Equal Tee : ASTM A403 WP Gr. 304, 304H, 309, 310, 316, 316L, 317L, 321, 347, 904L
        2. Carbon Steel Equal Tee: ASTM A 234 WPB, WPBW, WPHY 42, WPHY 46, WPHY 52, WPH 60, WPHY 65 & WPHY 70.
        3. Low Temperature Carbon Steel Equal Tee: ASTM A420 WPL3, A420 WPL6
        4. Alloy Steel Equal Tee: ASTM / ASME A/SA 234 Gr. WP 1, WP 5, WP 9, WP 11, WP 12, WP 22, WP 91
        5. Duplex Steel Equal Tee : ASTM A 815, ASME SA 815 UNS NO S31803, S32205. Worst-off No. 1.4462
        6. Nickel Alloy Equal Tee : ASTM / ASME SB 336 UNS 2200 ( NICKEL 200 ), UNS 2201 (NICKEL 201 ), UNS 4400 (MONEL 400 ), UNS 8020 ( ALLOY 20 / 20 CB 3, UNS 8825 INCONEL (825), UNS 6600 (INCONEL 600 ), UNS 6601 ( INCONEL 601 ), UNS 6625 (INCONEL 625), UNS 10276 ( HASTELLOY C 276 )

    • We are the leading manufacturer and supplier of Equal Tee in Austria. Get the best offer for high-quality Equal Tee from us in Austria. We have plenty of stock of Equal Tee in the Austria. Place your order online for Equal Tee in Austria. We are the leading Equal Tee manufacturer in Austria. Get your best quality Equal Tee in Austria. Our Equal Tee Buttweld Pipe Fittings are manufactures with dissimilar grades of standard ranges and meets its provisions through international and national standards. Fitwel Industries LLP manufactures buttweld steel pipe tee fittings from stainless steel pipe tee fitting, carbon steel pipe tee fitting, aluminum pipe tee fitting, mild steel pipe tee fitting, alloy steel pipe tee fitting, mild steel pipe tee fitting, Hastelloy pipe tee fitting, Monel pipe tee fitting, nickel pipe tee fitting, Inconel pipe tee fitting, and all other available alloys in all schedules. A pipe fitting can be called a pipe tee whenever it is a 3-way pipe fitting, the most common type of pipe fitting as it is used to combine and/or split the flow of fluid as well as to change directions. We supply straight tees (equal tees) and reducing tees (unequal tees) to pipe fitting distributors throughout the Mumbai, India. Visit our laterals page to learn more about lateral tees.

      Available in:

      Standard and non-standard ANSI dimensions

      All schedules and alloys including carbon steel, aluminum, stainless steel, and others.

      Sizes:1″ thru 24″

      End Prep:

      1. Square cut
      2. 37 1/2 Beveled
      3. Roll Groove
      4. Cut Groove
      5. Flanged Ends

        6. Specification of Equal Tee

        1. Dimensions : ANSI/ASME B16.9, B16.28, MSS-SP-43.
        2. Thickness : Schedule 5S, 10S, 20S, S10, S20, S30, STD, 40S, S40, S60, XS, 80S, S80, S100, S120, S140, S160, XXS and etc.
        3. Size : Seamless ( 1/2″～24″), ERW / Welded / Fabricated Elbow (1/2″～48″)
        4. Type : Seamless / Welded / Fabricated
        5. Form : Straight Tee, Pipe Tee, Equal Tee
        6. Standard: ANSI/ASME, MSS, JIS, DIN, BS, etc.

        Grade of Equal Tee

        1. stainless steel Equal Tee, carbon steel Equal Tee, alloy steel Equal Tee, mild steel Equal Tee : ASTM A403 WP Gr. 304, 304H, 309, 310, 316, 316L, 317L, 321, 347, 904L
        2. Carbon Steel Equal Tee: ASTM A 234 WPB, WPBW, WPHY 42, WPHY 46, WPHY 52, WPH 60, WPHY 65 & WPHY 70.
        3. Low Temperature Carbon Steel Equal Tee: ASTM A420 WPL3, A420 WPL6
        4. Alloy Steel Equal Tee: ASTM / ASME A/SA 234 Gr. WP 1, WP 5, WP 9, WP 11, WP 12, WP 22, WP 91
        5. Duplex Steel Equal Tee : ASTM A 815, ASME SA 815 UNS NO S31803, S32205. Worst-off No. 1.4462
        6. Nickel Alloy Equal Tee : ASTM / ASME SB 336 UNS 2200 ( NICKEL 200 ), UNS 2201 (NICKEL 201 ), UNS 4400 (MONEL 400 ), UNS 8020 ( ALLOY 20 / 20 CB 3, UNS 8825 INCONEL (825), UNS 6600 (INCONEL 600 ), UNS 6601 ( INCONEL 601 ), UNS 6625 (INCONEL 625), UNS 10276 ( HASTELLOY C 276 )

    • We are the leading manufacturer and supplier of Equal Tee in Nigeria. Get the best offer for high-quality Equal Tee from us in Nigeria. We have plenty of stock of Equal Tee in the Nigeria. Place your order online for Equal Tee in Nigeria. We are the leading Equal Tee manufacturer in Nigeria. Get your best quality Equal Tee in Nigeria. Our Equal Tee Buttweld Pipe Fittings are manufactures with dissimilar grades of standard ranges and meets its provisions through international and national standards. Fitwel Industries LLP manufactures buttweld steel pipe tee fittings from stainless steel pipe tee fitting, carbon steel pipe tee fitting, aluminum pipe tee fitting, mild steel pipe tee fitting, alloy steel pipe tee fitting, mild steel pipe tee fitting, Hastelloy pipe tee fitting, Monel pipe tee fitting, nickel pipe tee fitting, Inconel pipe tee fitting, and all other available alloys in all schedules. A pipe fitting can be called a pipe tee whenever it is a 3-way pipe fitting, the most common type of pipe fitting as it is used to combine and/or split the flow of fluid as well as to change directions. We supply straight tees (equal tees) and reducing tees (unequal tees) to pipe fitting distributors throughout the Mumbai, India. Visit our laterals page to learn more about lateral tees.

      Available in:

      Standard and non-standard ANSI dimensions

      All schedules and alloys including carbon steel, aluminum, stainless steel, and others.

      Sizes:1″ thru 24″

      End Prep:

      1. Square cut
      2. 37 1/2 Beveled
      3. Roll Groove
      4. Cut Groove
      5. Flanged Ends

        6. Specification of Equal Tee

        1. Dimensions : ANSI/ASME B16.9, B16.28, MSS-SP-43.
        2. Thickness : Schedule 5S, 10S, 20S, S10, S20, S30, STD, 40S, S40, S60, XS, 80S, S80, S100, S120, S140, S160, XXS and etc.
        3. Size : Seamless ( 1/2″～24″), ERW / Welded / Fabricated Elbow (1/2″～48″)
        4. Type : Seamless / Welded / Fabricated
        5. Form : Straight Tee, Pipe Tee, Equal Tee
        6. Standard: ANSI/ASME, MSS, JIS, DIN, BS, etc.

        Grade of Equal Tee

        1. stainless steel Equal Tee, carbon steel Equal Tee, alloy steel Equal Tee, mild steel Equal Tee : ASTM A403 WP Gr. 304, 304H, 309, 310, 316, 316L, 317L, 321, 347, 904L
        2. Carbon Steel Equal Tee: ASTM A 234 WPB, WPBW, WPHY 42, WPHY 46, WPHY 52, WPH 60, WPHY 65 & WPHY 70.
        3. Low Temperature Carbon Steel Equal Tee: ASTM A420 WPL3, A420 WPL6
        4. Alloy Steel Equal Tee: ASTM / ASME A/SA 234 Gr. WP 1, WP 5, WP 9, WP 11, WP 12, WP 22, WP 91
        5. Duplex Steel Equal Tee : ASTM A 815, ASME SA 815 UNS NO S31803, S32205. Worst-off No. 1.4462
        6. Nickel Alloy Equal Tee : ASTM / ASME SB 336 UNS 2200 ( NICKEL 200 ), UNS 2201 (NICKEL 201 ), UNS 4400 (MONEL 400 ), UNS 8020 ( ALLOY 20 / 20 CB 3, UNS 8825 INCONEL (825), UNS 6600 (INCONEL 600 ), UNS 6601 ( INCONEL 601 ), UNS 6625 (INCONEL 625), UNS 10276 ( HASTELLOY C 276 )

    • We are the leading manufacturer and supplier of Equal Tee in Sudan. Get the best offer for high-quality Equal Tee from us in Sudan. We have plenty of stock of Equal Tee in the Sudan. Place your order online for Equal Tee in Sudan. We are the leading Equal Tee manufacturer in Sudan. Get your best quality Equal Tee in Sudan. Our Equal Tee Buttweld Pipe Fittings are manufactures with dissimilar grades of standard ranges and meets its provisions through international and national standards. Fitwel Industries LLP manufactures buttweld steel pipe tee fittings from stainless steel pipe tee fitting, carbon steel pipe tee fitting, aluminum pipe tee fitting, mild steel pipe tee fitting, alloy steel pipe tee fitting, mild steel pipe tee fitting, Hastelloy pipe tee fitting, Monel pipe tee fitting, nickel pipe tee fitting, Inconel pipe tee fitting, and all other available alloys in all schedules. A pipe fitting can be called a pipe tee whenever it is a 3-way pipe fitting, the most common type of pipe fitting as it is used to combine and/or split the flow of fluid as well as to change directions. We supply straight tees (equal tees) and reducing tees (unequal tees) to pipe fitting distributors throughout the Mumbai, India. Visit our laterals page to learn more about lateral tees.

      Available in:

      Standard and non-standard ANSI dimensions

      All schedules and alloys including carbon steel, aluminum, stainless steel, and others.

      Sizes:1″ thru 24″

      End Prep:

      1. Square cut
      2. 37 1/2 Beveled
      3. Roll Groove
      4. Cut Groove
      5. Flanged Ends

        6. Specification of Equal Tee

        1. Dimensions : ANSI/ASME B16.9, B16.28, MSS-SP-43.
        2. Thickness : Schedule 5S, 10S, 20S, S10, S20, S30, STD, 40S, S40, S60, XS, 80S, S80, S100, S120, S140, S160, XXS and etc.
        3. Size : Seamless ( 1/2″～24″), ERW / Welded / Fabricated Elbow (1/2″～48″)
        4. Type : Seamless / Welded / Fabricated
        5. Form : Straight Tee, Pipe Tee, Equal Tee
        6. Standard: ANSI/ASME, MSS, JIS, DIN, BS, etc.

        Grade of Equal Tee

        1. stainless steel Equal Tee, carbon steel Equal Tee, alloy steel Equal Tee, mild steel Equal Tee : ASTM A403 WP Gr. 304, 304H, 309, 310, 316, 316L, 317L, 321, 347, 904L
        2. Carbon Steel Equal Tee: ASTM A 234 WPB, WPBW, WPHY 42, WPHY 46, WPHY 52, WPH 60, WPHY 65 & WPHY 70.
        3. Low Temperature Carbon Steel Equal Tee: ASTM A420 WPL3, A420 WPL6
        4. Alloy Steel Equal Tee: ASTM / ASME A/SA 234 Gr. WP 1, WP 5, WP 9, WP 11, WP 12, WP 22, WP 91
        5. Duplex Steel Equal Tee : ASTM A 815, ASME SA 815 UNS NO S31803, S32205. Worst-off No. 1.4462
        6. Nickel Alloy Equal Tee : ASTM / ASME SB 336 UNS 2200 ( NICKEL 200 ), UNS 2201 (NICKEL 201 ), UNS 4400 (MONEL 400 ), UNS 8020 ( ALLOY 20 / 20 CB 3, UNS 8825 INCONEL (825), UNS 6600 (INCONEL 600 ), UNS 6601 ( INCONEL 601 ), UNS 6625 (INCONEL 625), UNS 10276 ( HASTELLOY C 276 )

    • We are the leading manufacturer and supplier of Equal Tee in Egypt. Get the best offer for high-quality Equal Tee from us in Egypt. We have plenty of stock of Equal Tee in the Egypt. Place your order online for Equal Tee in Egypt. We are the leading Equal Tee manufacturer in Egypt. Get your best quality Equal Tee in Egypt. Our Equal Tee Buttweld Pipe Fittings are manufactures with dissimilar grades of standard ranges and meets its provisions through international and national standards. Fitwel Industries LLP manufactures buttweld steel pipe tee fittings from stainless steel pipe tee fitting, carbon steel pipe tee fitting, aluminum pipe tee fitting, mild steel pipe tee fitting, alloy steel pipe tee fitting, mild steel pipe tee fitting, Hastelloy pipe tee fitting, Monel pipe tee fitting, nickel pipe tee fitting, Inconel pipe tee fitting, and all other available alloys in all schedules. A pipe fitting can be called a pipe tee whenever it is a 3-way pipe fitting, the most common type of pipe fitting as it is used to combine and/or split the flow of fluid as well as to change directions. We supply straight tees (equal tees) and reducing tees (unequal tees) to pipe fitting distributors throughout the Mumbai, India. Visit our laterals page to learn more about lateral tees.

      Available in:

      Standard and non-standard ANSI dimensions

      All schedules and alloys including carbon steel, aluminum, stainless steel, and others.

      Sizes:1″ thru 24″

      End Prep:

      1. Square cut
      2. 37 1/2 Beveled
      3. Roll Groove
      4. Cut Groove
      5. Flanged Ends

        6. Specification of Equal Tee

        1. Dimensions : ANSI/ASME B16.9, B16.28, MSS-SP-43.
        2. Thickness : Schedule 5S, 10S, 20S, S10, S20, S30, STD, 40S, S40, S60, XS, 80S, S80, S100, S120, S140, S160, XXS and etc.
        3. Size : Seamless ( 1/2″～24″), ERW / Welded / Fabricated Elbow (1/2″～48″)
        4. Type : Seamless / Welded / Fabricated
        5. Form : Straight Tee, Pipe Tee, Equal Tee
        6. Standard: ANSI/ASME, MSS, JIS, DIN, BS, etc.

        Grade of Equal Tee

        1. stainless steel Equal Tee, carbon steel Equal Tee, alloy steel Equal Tee, mild steel Equal Tee : ASTM A403 WP Gr. 304, 304H, 309, 310, 316, 316L, 317L, 321, 347, 904L
        2. Carbon Steel Equal Tee: ASTM A 234 WPB, WPBW, WPHY 42, WPHY 46, WPHY 52, WPH 60, WPHY 65 & WPHY 70.
        3. Low Temperature Carbon Steel Equal Tee: ASTM A420 WPL3, A420 WPL6
        4. Alloy Steel Equal Tee: ASTM / ASME A/SA 234 Gr. WP 1, WP 5, WP 9, WP 11, WP 12, WP 22, WP 91
        5. Duplex Steel Equal Tee : ASTM A 815, ASME SA 815 UNS NO S31803, S32205. Worst-off No. 1.4462
        6. Nickel Alloy Equal Tee : ASTM / ASME SB 336 UNS 2200 ( NICKEL 200 ), UNS 2201 (NICKEL 201 ), UNS 4400 (MONEL 400 ), UNS 8020 ( ALLOY 20 / 20 CB 3, UNS 8825 INCONEL (825), UNS 6600 (INCONEL 600 ), UNS 6601 ( INCONEL 601 ), UNS 6625 (INCONEL 625), UNS 10276 ( HASTELLOY C 276 )

    • We are the leading manufacturer and supplier of Equal Tee in Zambia. Get the best offer for high-quality Equal Tee from us in Zambia. We have plenty of stock of Equal Tee in the Zambia. Place your order online for Equal Tee in Zambia. We are the leading Equal Tee manufacturer in Zambia. Get your best quality Equal Tee in Zambia. Our Equal Tee Buttweld Pipe Fittings are manufactures with dissimilar grades of standard ranges and meets its provisions through international and national standards. Fitwel Industries LLP manufactures buttweld steel pipe tee fittings from stainless steel pipe tee fitting, carbon steel pipe tee fitting, aluminum pipe tee fitting, mild steel pipe tee fitting, alloy steel pipe tee fitting, mild steel pipe tee fitting, Hastelloy pipe tee fitting, Monel pipe tee fitting, nickel pipe tee fitting, Inconel pipe tee fitting, and all other available alloys in all schedules. A pipe fitting can be called a pipe tee whenever it is a 3-way pipe fitting, the most common type of pipe fitting as it is used to combine and/or split the flow of fluid as well as to change directions. We supply straight tees (equal tees) and reducing tees (unequal tees) to pipe fitting distributors throughout the Mumbai, India. Visit our laterals page to learn more about lateral tees.

      Available in:

      Standard and non-standard ANSI dimensions

      All schedules and alloys including carbon steel, aluminum, stainless steel, and others.

      Sizes:1″ thru 24″

      End Prep:

      1. Square cut
      2. 37 1/2 Beveled
      3. Roll Groove
      4. Cut Groove
      5. Flanged Ends

        6. Specification of Equal Tee

        1. Dimensions : ANSI/ASME B16.9, B16.28, MSS-SP-43.
        2. Thickness : Schedule 5S, 10S, 20S, S10, S20, S30, STD, 40S, S40, S60, XS, 80S, S80, S100, S120, S140, S160, XXS and etc.
        3. Size : Seamless ( 1/2″～24″), ERW / Welded / Fabricated Elbow (1/2″～48″)
        4. Type : Seamless / Welded / Fabricated
        5. Form : Straight Tee, Pipe Tee, Equal Tee
        6. Standard: ANSI/ASME, MSS, JIS, DIN, BS, etc.

        Grade of Equal Tee

        1. stainless steel Equal Tee, carbon steel Equal Tee, alloy steel Equal Tee, mild steel Equal Tee : ASTM A403 WP Gr. 304, 304H, 309, 310, 316, 316L, 317L, 321, 347, 904L
        2. Carbon Steel Equal Tee: ASTM A 234 WPB, WPBW, WPHY 42, WPHY 46, WPHY 52, WPH 60, WPHY 65 & WPHY 70.
        3. Low Temperature Carbon Steel Equal Tee: ASTM A420 WPL3, A420 WPL6
        4. Alloy Steel Equal Tee: ASTM / ASME A/SA 234 Gr. WP 1, WP 5, WP 9, WP 11, WP 12, WP 22, WP 91
        5. Duplex Steel Equal Tee : ASTM A 815, ASME SA 815 UNS NO S31803, S32205. Worst-off No. 1.4462
        6. Nickel Alloy Equal Tee : ASTM / ASME SB 336 UNS 2200 ( NICKEL 200 ), UNS 2201 (NICKEL 201 ), UNS 4400 (MONEL 400 ), UNS 8020 ( ALLOY 20 / 20 CB 3, UNS 8825 INCONEL (825), UNS 6600 (INCONEL 600 ), UNS 6601 ( INCONEL 601 ), UNS 6625 (INCONEL 625), UNS 10276 ( HASTELLOY C 276 )

    • We are the leading manufacturer and supplier of Equal Tee in Libya. Get the best offer for high-quality Equal Tee from us in Libya. We have plenty of stock of Equal Tee in the Libya. Place your order online for Equal Tee in Libya. We are the leading Equal Tee manufacturer in Libya. Get your best quality Equal Tee in Libya. Our Equal Tee Buttweld Pipe Fittings are manufactures with dissimilar grades of standard ranges and meets its provisions through international and national standards. Fitwel Industries LLP manufactures buttweld steel pipe tee fittings from stainless steel pipe tee fitting, carbon steel pipe tee fitting, aluminum pipe tee fitting, mild steel pipe tee fitting, alloy steel pipe tee fitting, mild steel pipe tee fitting, Hastelloy pipe tee fitting, Monel pipe tee fitting, nickel pipe tee fitting, Inconel pipe tee fitting, and all other available alloys in all schedules. A pipe fitting can be called a pipe tee whenever it is a 3-way pipe fitting, the most common type of pipe fitting as it is used to combine and/or split the flow of fluid as well as to change directions. We supply straight tees (equal tees) and reducing tees (unequal tees) to pipe fitting distributors throughout the Mumbai, India. Visit our laterals page to learn more about lateral tees.

      Available in:

      Standard and non-standard ANSI dimensions

      All schedules and alloys including carbon steel, aluminum, stainless steel, and others.

      Sizes:1″ thru 24″

      End Prep:

      1. Square cut
      2. 37 1/2 Beveled
      3. Roll Groove
      4. Cut Groove
      5. Flanged Ends

        6. Specification of Equal Tee

        1. Dimensions : ANSI/ASME B16.9, B16.28, MSS-SP-43.
        2. Thickness : Schedule 5S, 10S, 20S, S10, S20, S30, STD, 40S, S40, S60, XS, 80S, S80, S100, S120, S140, S160, XXS and etc.
        3. Size : Seamless ( 1/2″～24″), ERW / Welded / Fabricated Elbow (1/2″～48″)
        4. Type : Seamless / Welded / Fabricated
        5. Form : Straight Tee, Pipe Tee, Equal Tee
        6. Standard: ANSI/ASME, MSS, JIS, DIN, BS, etc.

        Grade of Equal Tee

        1. stainless steel Equal Tee, carbon steel Equal Tee, alloy steel Equal Tee, mild steel Equal Tee : ASTM A403 WP Gr. 304, 304H, 309, 310, 316, 316L, 317L, 321, 347, 904L
        2. Carbon Steel Equal Tee: ASTM A 234 WPB, WPBW, WPHY 42, WPHY 46, WPHY 52, WPH 60, WPHY 65 & WPHY 70.
        3. Low Temperature Carbon Steel Equal Tee: ASTM A420 WPL3, A420 WPL6
        4. Alloy Steel Equal Tee: ASTM / ASME A/SA 234 Gr. WP 1, WP 5, WP 9, WP 11, WP 12, WP 22, WP 91
        5. Duplex Steel Equal Tee : ASTM A 815, ASME SA 815 UNS NO S31803, S32205. Worst-off No. 1.4462
        6. Nickel Alloy Equal Tee : ASTM / ASME SB 336 UNS 2200 ( NICKEL 200 ), UNS 2201 (NICKEL 201 ), UNS 4400 (MONEL 400 ), UNS 8020 ( ALLOY 20 / 20 CB 3, UNS 8825 INCONEL (825), UNS 6600 (INCONEL 600 ), UNS 6601 ( INCONEL 601 ), UNS 6625 (INCONEL 625), UNS 10276 ( HASTELLOY C 276 )

    • We are the leading manufacturer and supplier of Equal Tee in Brazil. Get the best offer for high-quality Equal Tee from us in Brazil. We have plenty of stock of Equal Tee in the Brazil. Place your order online for Equal Tee in Brazil. We are the leading Equal Tee manufacturer in Brazil. Get your best quality Equal Tee in Brazil. Our Equal Tee Buttweld Pipe Fittings are manufactures with dissimilar grades of standard ranges and meets its provisions through international and national standards. Fitwel Industries LLP manufactures buttweld steel pipe tee fittings from stainless steel pipe tee fitting, carbon steel pipe tee fitting, aluminum pipe tee fitting, mild steel pipe tee fitting, alloy steel pipe tee fitting, mild steel pipe tee fitting, Hastelloy pipe tee fitting, Monel pipe tee fitting, nickel pipe tee fitting, Inconel pipe tee fitting, and all other available alloys in all schedules. A pipe fitting can be called a pipe tee whenever it is a 3-way pipe fitting, the most common type of pipe fitting as it is used to combine and/or split the flow of fluid as well as to change directions. We supply straight tees (equal tees) and reducing tees (unequal tees) to pipe fitting distributors throughout the Mumbai, India. Visit our laterals page to learn more about lateral tees.

      Available in:

      Standard and non-standard ANSI dimensions

      All schedules and alloys including carbon steel, aluminum, stainless steel, and others.

      Sizes:1″ thru 24″

      End Prep:

      1. Square cut
      2. 37 1/2 Beveled
      3. Roll Groove
      4. Cut Groove
      5. Flanged Ends

        6. Specification of Equal Tee

        1. Dimensions : ANSI/ASME B16.9, B16.28, MSS-SP-43.
        2. Thickness : Schedule 5S, 10S, 20S, S10, S20, S30, STD, 40S, S40, S60, XS, 80S, S80, S100, S120, S140, S160, XXS and etc.
        3. Size : Seamless ( 1/2″～24″), ERW / Welded / Fabricated Elbow (1/2″～48″)
        4. Type : Seamless / Welded / Fabricated
        5. Form : Straight Tee, Pipe Tee, Equal Tee
        6. Standard: ANSI/ASME, MSS, JIS, DIN, BS, etc.

        Grade of Equal Tee

        1. stainless steel Equal Tee, carbon steel Equal Tee, alloy steel Equal Tee, mild steel Equal Tee : ASTM A403 WP Gr. 304, 304H, 309, 310, 316, 316L, 317L, 321, 347, 904L
        2. Carbon Steel Equal Tee: ASTM A 234 WPB, WPBW, WPHY 42, WPHY 46, WPHY 52, WPH 60, WPHY 65 & WPHY 70.
        3. Low Temperature Carbon Steel Equal Tee: ASTM A420 WPL3, A420 WPL6
        4. Alloy Steel Equal Tee: ASTM / ASME A/SA 234 Gr. WP 1, WP 5, WP 9, WP 11, WP 12, WP 22, WP 91
        5. Duplex Steel Equal Tee : ASTM A 815, ASME SA 815 UNS NO S31803, S32205. Worst-off No. 1.4462
        6. Nickel Alloy Equal Tee : ASTM / ASME SB 336 UNS 2200 ( NICKEL 200 ), UNS 2201 (NICKEL 201 ), UNS 4400 (MONEL 400 ), UNS 8020 ( ALLOY 20 / 20 CB 3, UNS 8825 INCONEL (825), UNS 6600 (INCONEL 600 ), UNS 6601 ( INCONEL 601 ), UNS 6625 (INCONEL 625), UNS 10276 ( HASTELLOY C 276 )

    • We are the leading manufacturer and supplier of Equal Tee in Chile. Get the best offer for high-quality Equal Tee from us in Chile. We have plenty of stock of Equal Tee in the Chile. Place your order online for Equal Tee in Chile. We are the leading Equal Tee manufacturer in Chile. Get your best quality Equal Tee in Chile. Our Equal Tee Buttweld Pipe Fittings are manufactures with dissimilar grades of standard ranges and meets its provisions through international and national standards. Fitwel Industries LLP manufactures buttweld steel pipe tee fittings from stainless steel pipe tee fitting, carbon steel pipe tee fitting, aluminum pipe tee fitting, mild steel pipe tee fitting, alloy steel pipe tee fitting, mild steel pipe tee fitting, Hastelloy pipe tee fitting, Monel pipe tee fitting, nickel pipe tee fitting, Inconel pipe tee fitting, and all other available alloys in all schedules. A pipe fitting can be called a pipe tee whenever it is a 3-way pipe fitting, the most common type of pipe fitting as it is used to combine and/or split the flow of fluid as well as to change directions. We supply straight tees (equal tees) and reducing tees (unequal tees) to pipe fitting distributors throughout the Mumbai, India. Visit our laterals page to learn more about lateral tees.

      Available in:

      Standard and non-standard ANSI dimensions

      All schedules and alloys including carbon steel, aluminum, stainless steel, and others.

      Sizes:1″ thru 24″

      End Prep:

      1. Square cut
      2. 37 1/2 Beveled
      3. Roll Groove
      4. Cut Groove
      5. Flanged Ends

        6. Specification of Equal Tee

        1. Dimensions : ANSI/ASME B16.9, B16.28, MSS-SP-43.
        2. Thickness : Schedule 5S, 10S, 20S, S10, S20, S30, STD, 40S, S40, S60, XS, 80S, S80, S100, S120, S140, S160, XXS and etc.
        3. Size : Seamless ( 1/2″～24″), ERW / Welded / Fabricated Elbow (1/2″～48″)
        4. Type : Seamless / Welded / Fabricated
        5. Form : Straight Tee, Pipe Tee, Equal Tee
        6. Standard: ANSI/ASME, MSS, JIS, DIN, BS, etc.

        Grade of Equal Tee

        1. stainless steel Equal Tee, carbon steel Equal Tee, alloy steel Equal Tee, mild steel Equal Tee : ASTM A403 WP Gr. 304, 304H, 309, 310, 316, 316L, 317L, 321, 347, 904L
        2. Carbon Steel Equal Tee: ASTM A 234 WPB, WPBW, WPHY 42, WPHY 46, WPHY 52, WPH 60, WPHY 65 & WPHY 70.
        3. Low Temperature Carbon Steel Equal Tee: ASTM A420 WPL3, A420 WPL6
        4. Alloy Steel Equal Tee: ASTM / ASME A/SA 234 Gr. WP 1, WP 5, WP 9, WP 11, WP 12, WP 22, WP 91
        5. Duplex Steel Equal Tee : ASTM A 815, ASME SA 815 UNS NO S31803, S32205. Worst-off No. 1.4462
        6. Nickel Alloy Equal Tee : ASTM / ASME SB 336 UNS 2200 ( NICKEL 200 ), UNS 2201 (NICKEL 201 ), UNS 4400 (MONEL 400 ), UNS 8020 ( ALLOY 20 / 20 CB 3, UNS 8825 INCONEL (825), UNS 6600 (INCONEL 600 ), UNS 6601 ( INCONEL 601 ), UNS 6625 (INCONEL 625), UNS 10276 ( HASTELLOY C 276 )

    • We are the leading manufacturer and supplier of Equal Tee in USA. Get the best offer for high-quality Equal Tee from us in USA. We have plenty of stock of Equal Tee in the USA. Place your order online for Equal Tee in USA. We are the leading Equal Tee manufacturer in USA. Get your best quality Equal Tee in USA. Our Equal Tee Buttweld Pipe Fittings are manufactures with dissimilar grades of standard ranges and meets its provisions through international and national standards. Fitwel Industries LLP manufactures buttweld steel pipe tee fittings from stainless steel pipe tee fitting, carbon steel pipe tee fitting, aluminum pipe tee fitting, mild steel pipe tee fitting, alloy steel pipe tee fitting, mild steel pipe tee fitting, Hastelloy pipe tee fitting, Monel pipe tee fitting, nickel pipe tee fitting, Inconel pipe tee fitting, and all other available alloys in all schedules. A pipe fitting can be called a pipe tee whenever it is a 3-way pipe fitting, the most common type of pipe fitting as it is used to combine and/or split the flow of fluid as well as to change directions. We supply straight tees (equal tees) and reducing tees (unequal tees) to pipe fitting distributors throughout the Mumbai, India. Visit our laterals page to learn more about lateral tees.

      Available in:

      Standard and non-standard ANSI dimensions

      All schedules and alloys including carbon steel, aluminum, stainless steel, and others.

      Sizes:1″ thru 24″

      End Prep:

      1. Square cut
      2. 37 1/2 Beveled
      3. Roll Groove
      4. Cut Groove
      5. Flanged Ends

        6. Specification of Equal Tee

        1. Dimensions : ANSI/ASME B16.9, B16.28, MSS-SP-43.
        2. Thickness : Schedule 5S, 10S, 20S, S10, S20, S30, STD, 40S, S40, S60, XS, 80S, S80, S100, S120, S140, S160, XXS and etc.
        3. Size : Seamless ( 1/2″～24″), ERW / Welded / Fabricated Elbow (1/2″～48″)
        4. Type : Seamless / Welded / Fabricated
        5. Form : Straight Tee, Pipe Tee, Equal Tee
        6. Standard: ANSI/ASME, MSS, JIS, DIN, BS, etc.

        Grade of Equal Tee

        1. stainless steel Equal Tee, carbon steel Equal Tee, alloy steel Equal Tee, mild steel Equal Tee : ASTM A403 WP Gr. 304, 304H, 309, 310, 316, 316L, 317L, 321, 347, 904L
        2. Carbon Steel Equal Tee: ASTM A 234 WPB, WPBW, WPHY 42, WPHY 46, WPHY 52, WPH 60, WPHY 65 & WPHY 70.
        3. Low Temperature Carbon Steel Equal Tee: ASTM A420 WPL3, A420 WPL6
        4. Alloy Steel Equal Tee: ASTM / ASME A/SA 234 Gr. WP 1, WP 5, WP 9, WP 11, WP 12, WP 22, WP 91
        5. Duplex Steel Equal Tee : ASTM A 815, ASME SA 815 UNS NO S31803, S32205. Worst-off No. 1.4462
        6. Nickel Alloy Equal Tee : ASTM / ASME SB 336 UNS 2200 ( NICKEL 200 ), UNS 2201 (NICKEL 201 ), UNS 4400 (MONEL 400 ), UNS 8020 ( ALLOY 20 / 20 CB 3, UNS 8825 INCONEL (825), UNS 6600 (INCONEL 600 ), UNS 6601 ( INCONEL 601 ), UNS 6625 (INCONEL 625), UNS 10276 ( HASTELLOY C 276 )

    • We are the leading manufacturer and supplier of Equal Tee in Mexico. Get the best offer for high-quality Equal Tee from us in Mexico. We have plenty of stock of Equal Tee in the Mexico. Place your order online for Equal Tee in Mexico. We are the leading Equal Tee manufacturer in Mexico. Get your best quality Equal Tee in Mexico. Our Equal Tee Buttweld Pipe Fittings are manufactures with dissimilar grades of standard ranges and meets its provisions through international and national standards. Fitwel Industries LLP manufactures buttweld steel pipe tee fittings from stainless steel pipe tee fitting, carbon steel pipe tee fitting, aluminum pipe tee fitting, mild steel pipe tee fitting, alloy steel pipe tee fitting, mild steel pipe tee fitting, Hastelloy pipe tee fitting, Monel pipe tee fitting, nickel pipe tee fitting, Inconel pipe tee fitting, and all other available alloys in all schedules. A pipe fitting can be called a pipe tee whenever it is a 3-way pipe fitting, the most common type of pipe fitting as it is used to combine and/or split the flow of fluid as well as to change directions. We supply straight tees (equal tees) and reducing tees (unequal tees) to pipe fitting distributors throughout the Mumbai, India. Visit our laterals page to learn more about lateral tees.

      Available in:

      Standard and non-standard ANSI dimensions

      All schedules and alloys including carbon steel, aluminum, stainless steel, and others.

      Sizes:1″ thru 24″

      End Prep:

      1. Square cut
      2. 37 1/2 Beveled
      3. Roll Groove
      4. Cut Groove
      5. Flanged Ends

        6. Specification of Equal Tee

        1. Dimensions : ANSI/ASME B16.9, B16.28, MSS-SP-43.
        2. Thickness : Schedule 5S, 10S, 20S, S10, S20, S30, STD, 40S, S40, S60, XS, 80S, S80, S100, S120, S140, S160, XXS and etc.
        3. Size : Seamless ( 1/2″～24″), ERW / Welded / Fabricated Elbow (1/2″～48″)
        4. Type : Seamless / Welded / Fabricated
        5. Form : Straight Tee, Pipe Tee, Equal Tee
        6. Standard: ANSI/ASME, MSS, JIS, DIN, BS, etc.

        Grade of Equal Tee

        1. stainless steel Equal Tee, carbon steel Equal Tee, alloy steel Equal Tee, mild steel Equal Tee : ASTM A403 WP Gr. 304, 304H, 309, 310, 316, 316L, 317L, 321, 347, 904L
        2. Carbon Steel Equal Tee: ASTM A 234 WPB, WPBW, WPHY 42, WPHY 46, WPHY 52, WPH 60, WPHY 65 & WPHY 70.
        3. Low Temperature Carbon Steel Equal Tee: ASTM A420 WPL3, A420 WPL6
        4. Alloy Steel Equal Tee: ASTM / ASME A/SA 234 Gr. WP 1, WP 5, WP 9, WP 11, WP 12, WP 22, WP 91
        5. Duplex Steel Equal Tee : ASTM A 815, ASME SA 815 UNS NO S31803, S32205. Worst-off No. 1.4462
        6. Nickel Alloy Equal Tee : ASTM / ASME SB 336 UNS 2200 ( NICKEL 200 ), UNS 2201 (NICKEL 201 ), UNS 4400 (MONEL 400 ), UNS 8020 ( ALLOY 20 / 20 CB 3, UNS 8825 INCONEL (825), UNS 6600 (INCONEL 600 ), UNS 6601 ( INCONEL 601 ), UNS 6625 (INCONEL 625), UNS 10276 ( HASTELLOY C 276 )

    • We are the leading manufacturer and supplier of Equal Tee in Denmark. Get the best offer for high-quality Equal Tee from us in Denmark. We have plenty of stock of Equal Tee in the Denmark. Place your order online for Equal Tee in Denmark. We are the leading Equal Tee manufacturer in Denmark. Get your best quality Equal Tee in Denmark. Our Equal Tee Buttweld Pipe Fittings are manufactures with dissimilar grades of standard ranges and meets its provisions through international and national standards. Fitwel Industries LLP manufactures buttweld steel pipe tee fittings from stainless steel pipe tee fitting, carbon steel pipe tee fitting, aluminum pipe tee fitting, mild steel pipe tee fitting, alloy steel pipe tee fitting, mild steel pipe tee fitting, Hastelloy pipe tee fitting, Monel pipe tee fitting, nickel pipe tee fitting, Inconel pipe tee fitting, and all other available alloys in all schedules. A pipe fitting can be called a pipe tee whenever it is a 3-way pipe fitting, the most common type of pipe fitting as it is used to combine and/or split the flow of fluid as well as to change directions. We supply straight tees (equal tees) and reducing tees (unequal tees) to pipe fitting distributors throughout the Mumbai, India. Visit our laterals page to learn more about lateral tees.

      Available in:

      Standard and non-standard ANSI dimensions

      All schedules and alloys including carbon steel, aluminum, stainless steel, and others.

      Sizes:1″ thru 24″

      End Prep:

      1. Square cut
      2. 37 1/2 Beveled
      3. Roll Groove
      4. Cut Groove
      5. Flanged Ends

        6. Specification of Equal Tee

        1. Dimensions : ANSI/ASME B16.9, B16.28, MSS-SP-43.
        2. Thickness : Schedule 5S, 10S, 20S, S10, S20, S30, STD, 40S, S40, S60, XS, 80S, S80, S100, S120, S140, S160, XXS and etc.
        3. Size : Seamless ( 1/2″～24″), ERW / Welded / Fabricated Elbow (1/2″～48″)
        4. Type : Seamless / Welded / Fabricated
        5. Form : Straight Tee, Pipe Tee, Equal Tee
        6. Standard: ANSI/ASME, MSS, JIS, DIN, BS, etc.

        Grade of Equal Tee

        1. stainless steel Equal Tee, carbon steel Equal Tee, alloy steel Equal Tee, mild steel Equal Tee : ASTM A403 WP Gr. 304, 304H, 309, 310, 316, 316L, 317L, 321, 347, 904L
        2. Carbon Steel Equal Tee: ASTM A 234 WPB, WPBW, WPHY 42, WPHY 46, WPHY 52, WPH 60, WPHY 65 & WPHY 70.
        3. Low Temperature Carbon Steel Equal Tee: ASTM A420 WPL3, A420 WPL6
        4. Alloy Steel Equal Tee: ASTM / ASME A/SA 234 Gr. WP 1, WP 5, WP 9, WP 11, WP 12, WP 22, WP 91
        5. Duplex Steel Equal Tee : ASTM A 815, ASME SA 815 UNS NO S31803, S32205. Worst-off No. 1.4462
        6. Nickel Alloy Equal Tee : ASTM / ASME SB 336 UNS 2200 ( NICKEL 200 ), UNS 2201 (NICKEL 201 ), UNS 4400 (MONEL 400 ), UNS 8020 ( ALLOY 20 / 20 CB 3, UNS 8825 INCONEL (825), UNS 6600 (INCONEL 600 ), UNS 6601 ( INCONEL 601 ), UNS 6625 (INCONEL 625), UNS 10276 ( HASTELLOY C 276 )

    • We are the leading manufacturer and supplier of Equal Tee in Ukraine. Get the best offer for high-quality Equal Tee from us in Ukraine. We have plenty of stock of Equal Tee in the Ukraine. Place your order online for Equal Tee in Ukraine. We are the leading Equal Tee manufacturer in Ukraine. Get your best quality Equal Tee in Ukraine. Our Equal Tee Buttweld Pipe Fittings are manufactures with dissimilar grades of standard ranges and meets its provisions through international and national standards. Fitwel Industries LLP manufactures buttweld steel pipe tee fittings from stainless steel pipe tee fitting, carbon steel pipe tee fitting, aluminum pipe tee fitting, mild steel pipe tee fitting, alloy steel pipe tee fitting, mild steel pipe tee fitting, Hastelloy pipe tee fitting, Monel pipe tee fitting, nickel pipe tee fitting, Inconel pipe tee fitting, and all other available alloys in all schedules. A pipe fitting can be called a pipe tee whenever it is a 3-way pipe fitting, the most common type of pipe fitting as it is used to combine and/or split the flow of fluid as well as to change directions. We supply straight tees (equal tees) and reducing tees (unequal tees) to pipe fitting distributors throughout the Mumbai, India. Visit our laterals page to learn more about lateral tees.

      Available in:

      Standard and non-standard ANSI dimensions

      All schedules and alloys including carbon steel, aluminum, stainless steel, and others.

      Sizes:1″ thru 24″

      End Prep:

      1. Square cut
      2. 37 1/2 Beveled
      3. Roll Groove
      4. Cut Groove
      5. Flanged Ends

        6. Specification of Equal Tee

        1. Dimensions : ANSI/ASME B16.9, B16.28, MSS-SP-43.
        2. Thickness : Schedule 5S, 10S, 20S, S10, S20, S30, STD, 40S, S40, S60, XS, 80S, S80, S100, S120, S140, S160, XXS and etc.
        3. Size : Seamless ( 1/2″～24″), ERW / Welded / Fabricated Elbow (1/2″～48″)
        4. Type : Seamless / Welded / Fabricated
        5. Form : Straight Tee, Pipe Tee, Equal Tee
        6. Standard: ANSI/ASME, MSS, JIS, DIN, BS, etc.

        Grade of Equal Tee

        1. stainless steel Equal Tee, carbon steel Equal Tee, alloy steel Equal Tee, mild steel Equal Tee : ASTM A403 WP Gr. 304, 304H, 309, 310, 316, 316L, 317L, 321, 347, 904L
        2. Carbon Steel Equal Tee: ASTM A 234 WPB, WPBW, WPHY 42, WPHY 46, WPHY 52, WPH 60, WPHY 65 & WPHY 70.
        3. Low Temperature Carbon Steel Equal Tee: ASTM A420 WPL3, A420 WPL6
        4. Alloy Steel Equal Tee: ASTM / ASME A/SA 234 Gr. WP 1, WP 5, WP 9, WP 11, WP 12, WP 22, WP 91
        5. Duplex Steel Equal Tee : ASTM A 815, ASME SA 815 UNS NO S31803, S32205. Worst-off No. 1.4462
        6. Nickel Alloy Equal Tee : ASTM / ASME SB 336 UNS 2200 ( NICKEL 200 ), UNS 2201 (NICKEL 201 ), UNS 4400 (MONEL 400 ), UNS 8020 ( ALLOY 20 / 20 CB 3, UNS 8825 INCONEL (825), UNS 6600 (INCONEL 600 ), UNS 6601 ( INCONEL 601 ), UNS 6625 (INCONEL 625), UNS 10276 ( HASTELLOY C 276 )

    • We are the leading manufacturer and supplier of Equal Tee in Peru. Get the best offer for high-quality Equal Tee from us in Peru. We have plenty of stock of Equal Tee in the Peru. Place your order online for Equal Tee in Peru. We are the leading Equal Tee manufacturer in Peru. Get your best quality Equal Tee in Peru. Our Equal Tee Buttweld Pipe Fittings are manufactures with dissimilar grades of standard ranges and meets its provisions through international and national standards. Fitwel Industries LLP manufactures buttweld steel pipe tee fittings from stainless steel pipe tee fitting, carbon steel pipe tee fitting, aluminum pipe tee fitting, mild steel pipe tee fitting, alloy steel pipe tee fitting, mild steel pipe tee fitting, Hastelloy pipe tee fitting, Monel pipe tee fitting, nickel pipe tee fitting, Inconel pipe tee fitting, and all other available alloys in all schedules. A pipe fitting can be called a pipe tee whenever it is a 3-way pipe fitting, the most common type of pipe fitting as it is used to combine and/or split the flow of fluid as well as to change directions. We supply straight tees (equal tees) and reducing tees (unequal tees) to pipe fitting distributors throughout the Mumbai, India. Visit our laterals page to learn more about lateral tees.

      Available in:

      Standard and non-standard ANSI dimensions

      All schedules and alloys including carbon steel, aluminum, stainless steel, and others.

      Sizes:1″ thru 24″

      End Prep:

      1. Square cut
      2. 37 1/2 Beveled
      3. Roll Groove
      4. Cut Groove
      5. Flanged Ends

        6. Specification of Equal Tee

        1. Dimensions : ANSI/ASME B16.9, B16.28, MSS-SP-43.
        2. Thickness : Schedule 5S, 10S, 20S, S10, S20, S30, STD, 40S, S40, S60, XS, 80S, S80, S100, S120, S140, S160, XXS and etc.
        3. Size : Seamless ( 1/2″～24″), ERW / Welded / Fabricated Elbow (1/2″～48″)
        4. Type : Seamless / Welded / Fabricated
        5. Form : Straight Tee, Pipe Tee, Equal Tee
        6. Standard: ANSI/ASME, MSS, JIS, DIN, BS, etc.

        Grade of Equal Tee

        1. stainless steel Equal Tee, carbon steel Equal Tee, alloy steel Equal Tee, mild steel Equal Tee : ASTM A403 WP Gr. 304, 304H, 309, 310, 316, 316L, 317L, 321, 347, 904L
        2. Carbon Steel Equal Tee: ASTM A 234 WPB, WPBW, WPHY 42, WPHY 46, WPHY 52, WPH 60, WPHY 65 & WPHY 70.
        3. Low Temperature Carbon Steel Equal Tee: ASTM A420 WPL3, A420 WPL6
        4. Alloy Steel Equal Tee: ASTM / ASME A/SA 234 Gr. WP 1, WP 5, WP 9, WP 11, WP 12, WP 22, WP 91
        5. Duplex Steel Equal Tee : ASTM A 815, ASME SA 815 UNS NO S31803, S32205. Worst-off No. 1.4462
        6. Nickel Alloy Equal Tee : ASTM / ASME SB 336 UNS 2200 ( NICKEL 200 ), UNS 2201 (NICKEL 201 ), UNS 4400 (MONEL 400 ), UNS 8020 ( ALLOY 20 / 20 CB 3, UNS 8825 INCONEL (825), UNS 6600 (INCONEL 600 ), UNS 6601 ( INCONEL 601 ), UNS 6625 (INCONEL 625), UNS 10276 ( HASTELLOY C 276 )

    • We are the leading manufacturer and supplier of Equal Tee in Lebanon. Get the best offer for high-quality Equal Tee from us in Lebanon. We have plenty of stock of Equal Tee in the Lebanon. Place your order online for Equal Tee in Lebanon. We are the leading Equal Tee manufacturer in Lebanon. Get your best quality Equal Tee in Lebanon. Our Equal Tee Buttweld Pipe Fittings are manufactures with dissimilar grades of standard ranges and meets its provisions through international and national standards. Fitwel Industries LLP manufactures buttweld steel pipe tee fittings from stainless steel pipe tee fitting, carbon steel pipe tee fitting, aluminum pipe tee fitting, mild steel pipe tee fitting, alloy steel pipe tee fitting, mild steel pipe tee fitting, Hastelloy pipe tee fitting, Monel pipe tee fitting, nickel pipe tee fitting, Inconel pipe tee fitting, and all other available alloys in all schedules. A pipe fitting can be called a pipe tee whenever it is a 3-way pipe fitting, the most common type of pipe fitting as it is used to combine and/or split the flow of fluid as well as to change directions. We supply straight tees (equal tees) and reducing tees (unequal tees) to pipe fitting distributors throughout the Mumbai, India. Visit our laterals page to learn more about lateral tees.

      Available in:

      Standard and non-standard ANSI dimensions

      All schedules and alloys including carbon steel, aluminum, stainless steel, and others.

      Sizes:1″ thru 24″

      End Prep:

      1. Square cut
      2. 37 1/2 Beveled
      3. Roll Groove
      4. Cut Groove
      5. Flanged Ends

        6. Specification of Equal Tee

        1. Dimensions : ANSI/ASME B16.9, B16.28, MSS-SP-43.
        2. Thickness : Schedule 5S, 10S, 20S, S10, S20, S30, STD, 40S, S40, S60, XS, 80S, S80, S100, S120, S140, S160, XXS and etc.
        3. Size : Seamless ( 1/2″～24″), ERW / Welded / Fabricated Elbow (1/2″～48″)
        4. Type : Seamless / Welded / Fabricated
        5. Form : Straight Tee, Pipe Tee, Equal Tee
        6. Standard: ANSI/ASME, MSS, JIS, DIN, BS, etc.

        Grade of Equal Tee

        1. stainless steel Equal Tee, carbon steel Equal Tee, alloy steel Equal Tee, mild steel Equal Tee : ASTM A403 WP Gr. 304, 304H, 309, 310, 316, 316L, 317L, 321, 347, 904L
        2. Carbon Steel Equal Tee: ASTM A 234 WPB, WPBW, WPHY 42, WPHY 46, WPHY 52, WPH 60, WPHY 65 & WPHY 70.
        3. Low Temperature Carbon Steel Equal Tee: ASTM A420 WPL3, A420 WPL6
        4. Alloy Steel Equal Tee: ASTM / ASME A/SA 234 Gr. WP 1, WP 5, WP 9, WP 11, WP 12, WP 22, WP 91
        5. Duplex Steel Equal Tee : ASTM A 815, ASME SA 815 UNS NO S31803, S32205. Worst-off No. 1.4462
        6. Nickel Alloy Equal Tee : ASTM / ASME SB 336 UNS 2200 ( NICKEL 200 ), UNS 2201 (NICKEL 201 ), UNS 4400 (MONEL 400 ), UNS 8020 ( ALLOY 20 / 20 CB 3, UNS 8825 INCONEL (825), UNS 6600 (INCONEL 600 ), UNS 6601 ( INCONEL 601 ), UNS 6625 (INCONEL 625), UNS 10276 ( HASTELLOY C 276 )

    • We are the leading manufacturer and supplier of Equal Tee in Kenya. Get the best offer for high-quality Equal Tee from us in Kenya. We have plenty of stock of Equal Tee in the Kenya. Place your order online for Equal Tee in Kenya. We are the leading Equal Tee manufacturer in Kenya. Get your best quality Equal Tee in Kenya. Our Equal Tee Buttweld Pipe Fittings are manufactures with dissimilar grades of standard ranges and meets its provisions through international and national standards. Fitwel Industries LLP manufactures buttweld steel pipe tee fittings from stainless steel pipe tee fitting, carbon steel pipe tee fitting, aluminum pipe tee fitting, mild steel pipe tee fitting, alloy steel pipe tee fitting, mild steel pipe tee fitting, Hastelloy pipe tee fitting, Monel pipe tee fitting, nickel pipe tee fitting, Inconel pipe tee fitting, and all other available alloys in all schedules. A pipe fitting can be called a pipe tee whenever it is a 3-way pipe fitting, the most common type of pipe fitting as it is used to combine and/or split the flow of fluid as well as to change directions. We supply straight tees (equal tees) and reducing tees (unequal tees) to pipe fitting distributors throughout the Mumbai, India. Visit our laterals page to learn more about lateral tees.

      Available in:

      Standard and non-standard ANSI dimensions

      All schedules and alloys including carbon steel, aluminum, stainless steel, and others.

      Sizes:1″ thru 24″

      End Prep:

      1. Square cut
      2. 37 1/2 Beveled
      3. Roll Groove
      4. Cut Groove
      5. Flanged Ends

        6. Specification of Equal Tee

        1. Dimensions : ANSI/ASME B16.9, B16.28, MSS-SP-43.
        2. Thickness : Schedule 5S, 10S, 20S, S10, S20, S30, STD, 40S, S40, S60, XS, 80S, S80, S100, S120, S140, S160, XXS and etc.
        3. Size : Seamless ( 1/2″～24″), ERW / Welded / Fabricated Elbow (1/2″～48″)
        4. Type : Seamless / Welded / Fabricated
        5. Form : Straight Tee, Pipe Tee, Equal Tee
        6. Standard: ANSI/ASME, MSS, JIS, DIN, BS, etc.

        Grade of Equal Tee

        1. stainless steel Equal Tee, carbon steel Equal Tee, alloy steel Equal Tee, mild steel Equal Tee : ASTM A403 WP Gr. 304, 304H, 309, 310, 316, 316L, 317L, 321, 347, 904L
        2. Carbon Steel Equal Tee: ASTM A 234 WPB, WPBW, WPHY 42, WPHY 46, WPHY 52, WPH 60, WPHY 65 & WPHY 70.
        3. Low Temperature Carbon Steel Equal Tee: ASTM A420 WPL3, A420 WPL6
        4. Alloy Steel Equal Tee: ASTM / ASME A/SA 234 Gr. WP 1, WP 5, WP 9, WP 11, WP 12, WP 22, WP 91
        5. Duplex Steel Equal Tee : ASTM A 815, ASME SA 815 UNS NO S31803, S32205. Worst-off No. 1.4462
        6. Nickel Alloy Equal Tee : ASTM / ASME SB 336 UNS 2200 ( NICKEL 200 ), UNS 2201 (NICKEL 201 ), UNS 4400 (MONEL 400 ), UNS 8020 ( ALLOY 20 / 20 CB 3, UNS 8825 INCONEL (825), UNS 6600 (INCONEL 600 ), UNS 6601 ( INCONEL 601 ), UNS 6625 (INCONEL 625), UNS 10276 ( HASTELLOY C 276 )

    • We are the leading manufacturer and supplier of Equal Tee in France. Get the best offer for high-quality Equal Tee from us in France. We have plenty of stock of Equal Tee in the France. Place your order online for Equal Tee in France. We are the leading Equal Tee manufacturer in France. Get your best quality Equal Tee in France. Our Equal Tee Buttweld Pipe Fittings are manufactures with dissimilar grades of standard ranges and meets its provisions through international and national standards. Fitwel Industries LLP manufactures buttweld steel pipe tee fittings from stainless steel pipe tee fitting, carbon steel pipe tee fitting, aluminum pipe tee fitting, mild steel pipe tee fitting, alloy steel pipe tee fitting, mild steel pipe tee fitting, Hastelloy pipe tee fitting, Monel pipe tee fitting, nickel pipe tee fitting, Inconel pipe tee fitting, and all other available alloys in all schedules. A pipe fitting can be called a pipe tee whenever it is a 3-way pipe fitting, the most common type of pipe fitting as it is used to combine and/or split the flow of fluid as well as to change directions. We supply straight tees (equal tees) and reducing tees (unequal tees) to pipe fitting distributors throughout the Mumbai, India. Visit our laterals page to learn more about lateral tees.

      Available in:

      Standard and non-standard ANSI dimensions

      All schedules and alloys including carbon steel, aluminum, stainless steel, and others.

      Sizes:1″ thru 24″

      End Prep:

      1. Square cut
      2. 37 1/2 Beveled
      3. Roll Groove
      4. Cut Groove
      5. Flanged Ends

        6. Specification of Equal Tee

        1. Dimensions : ANSI/ASME B16.9, B16.28, MSS-SP-43.
        2. Thickness : Schedule 5S, 10S, 20S, S10, S20, S30, STD, 40S, S40, S60, XS, 80S, S80, S100, S120, S140, S160, XXS and etc.
        3. Size : Seamless ( 1/2″～24″), ERW / Welded / Fabricated Elbow (1/2″～48″)
        4. Type : Seamless / Welded / Fabricated
        5. Form : Straight Tee, Pipe Tee, Equal Tee
        6. Standard: ANSI/ASME, MSS, JIS, DIN, BS, etc.

        Grade of Equal Tee

        1. stainless steel Equal Tee, carbon steel Equal Tee, alloy steel Equal Tee, mild steel Equal Tee : ASTM A403 WP Gr. 304, 304H, 309, 310, 316, 316L, 317L, 321, 347, 904L
        2. Carbon Steel Equal Tee: ASTM A 234 WPB, WPBW, WPHY 42, WPHY 46, WPHY 52, WPH 60, WPHY 65 & WPHY 70.
        3. Low Temperature Carbon Steel Equal Tee: ASTM A420 WPL3, A420 WPL6
        4. Alloy Steel Equal Tee: ASTM / ASME A/SA 234 Gr. WP 1, WP 5, WP 9, WP 11, WP 12, WP 22, WP 91
        5. Duplex Steel Equal Tee : ASTM A 815, ASME SA 815 UNS NO S31803, S32205. Worst-off No. 1.4462
        6. Nickel Alloy Equal Tee : ASTM / ASME SB 336 UNS 2200 ( NICKEL 200 ), UNS 2201 (NICKEL 201 ), UNS 4400 (MONEL 400 ), UNS 8020 ( ALLOY 20 / 20 CB 3, UNS 8825 INCONEL (825), UNS 6600 (INCONEL 600 ), UNS 6601 ( INCONEL 601 ), UNS 6625 (INCONEL 625), UNS 10276 ( HASTELLOY C 276 )

    • We are the leading manufacturer and supplier of Equal Tee in Hungary. Get the best offer for high-quality Equal Tee from us in Hungary. We have plenty of stock of Equal Tee in the Hungary. Place your order online for Equal Tee in Hungary. We are the leading Equal Tee manufacturer in Hungary. Get your best quality Equal Tee in Hungary. Our Equal Tee Buttweld Pipe Fittings are manufactures with dissimilar grades of standard ranges and meets its provisions through international and national standards. Fitwel Industries LLP manufactures buttweld steel pipe tee fittings from stainless steel pipe tee fitting, carbon steel pipe tee fitting, aluminum pipe tee fitting, mild steel pipe tee fitting, alloy steel pipe tee fitting, mild steel pipe tee fitting, Hastelloy pipe tee fitting, Monel pipe tee fitting, nickel pipe tee fitting, Inconel pipe tee fitting, and all other available alloys in all schedules. A pipe fitting can be called a pipe tee whenever it is a 3-way pipe fitting, the most common type of pipe fitting as it is used to combine and/or split the flow of fluid as well as to change directions. We supply straight tees (equal tees) and reducing tees (unequal tees) to pipe fitting distributors throughout the Mumbai, India. Visit our laterals page to learn more about lateral tees.

      Available in:

      Standard and non-standard ANSI dimensions

      All schedules and alloys including carbon steel, aluminum, stainless steel, and others.

      Sizes:1″ thru 24″

      End Prep:

      1. Square cut
      2. 37 1/2 Beveled
      3. Roll Groove
      4. Cut Groove
      5. Flanged Ends

        6. Specification of Equal Tee

        1. Dimensions : ANSI/ASME B16.9, B16.28, MSS-SP-43.
        2. Thickness : Schedule 5S, 10S, 20S, S10, S20, S30, STD, 40S, S40, S60, XS, 80S, S80, S100, S120, S140, S160, XXS and etc.
        3. Size : Seamless ( 1/2″～24″), ERW / Welded / Fabricated Elbow (1/2″～48″)
        4. Type : Seamless / Welded / Fabricated
        5. Form : Straight Tee, Pipe Tee, Equal Tee
        6. Standard: ANSI/ASME, MSS, JIS, DIN, BS, etc.

        Grade of Equal Tee

        1. stainless steel Equal Tee, carbon steel Equal Tee, alloy steel Equal Tee, mild steel Equal Tee : ASTM A403 WP Gr. 304, 304H, 309, 310, 316, 316L, 317L, 321, 347, 904L
        2. Carbon Steel Equal Tee: ASTM A 234 WPB, WPBW, WPHY 42, WPHY 46, WPHY 52, WPH 60, WPHY 65 & WPHY 70.
        3. Low Temperature Carbon Steel Equal Tee: ASTM A420 WPL3, A420 WPL6
        4. Alloy Steel Equal Tee: ASTM / ASME A/SA 234 Gr. WP 1, WP 5, WP 9, WP 11, WP 12, WP 22, WP 91
        5. Duplex Steel Equal Tee : ASTM A 815, ASME SA 815 UNS NO S31803, S32205. Worst-off No. 1.4462
        6. Nickel Alloy Equal Tee : ASTM / ASME SB 336 UNS 2200 ( NICKEL 200 ), UNS 2201 (NICKEL 201 ), UNS 4400 (MONEL 400 ), UNS 8020 ( ALLOY 20 / 20 CB 3, UNS 8825 INCONEL (825), UNS 6600 (INCONEL 600 ), UNS 6601 ( INCONEL 601 ), UNS 6625 (INCONEL 625), UNS 10276 ( HASTELLOY C 276 )

    • We are the leading manufacturer and supplier of Equal Tee in Ethiopia. Get the best offer for high-quality Equal Tee from us in Ethiopia. We have plenty of stock of Equal Tee in the Ethiopia. Place your order online for Equal Tee in Ethiopia. We are the leading Equal Tee manufacturer in Ethiopia. Get your best quality Equal Tee in Ethiopia. Our Equal Tee Buttweld Pipe Fittings are manufactures with dissimilar grades of standard ranges and meets its provisions through international and national standards. Fitwel Industries LLP manufactures buttweld steel pipe tee fittings from stainless steel pipe tee fitting, carbon steel pipe tee fitting, aluminum pipe tee fitting, mild steel pipe tee fitting, alloy steel pipe tee fitting, mild steel pipe tee fitting, Hastelloy pipe tee fitting, Monel pipe tee fitting, nickel pipe tee fitting, Inconel pipe tee fitting, and all other available alloys in all schedules. A pipe fitting can be called a pipe tee whenever it is a 3-way pipe fitting, the most common type of pipe fitting as it is used to combine and/or split the flow of fluid as well as to change directions. We supply straight tees (equal tees) and reducing tees (unequal tees) to pipe fitting distributors throughout the Mumbai, India. Visit our laterals page to learn more about lateral tees.

      Available in:

      Standard and non-standard ANSI dimensions

      All schedules and alloys including carbon steel, aluminum, stainless steel, and others.

      Sizes:1″ thru 24″

      End Prep:

      1. Square cut
      2. 37 1/2 Beveled
      3. Roll Groove
      4. Cut Groove
      5. Flanged Ends

        6. Specification of Equal Tee

        1. Dimensions : ANSI/ASME B16.9, B16.28, MSS-SP-43.
        2. Thickness : Schedule 5S, 10S, 20S, S10, S20, S30, STD, 40S, S40, S60, XS, 80S, S80, S100, S120, S140, S160, XXS and etc.
        3. Size : Seamless ( 1/2″～24″), ERW / Welded / Fabricated Elbow (1/2″～48″)
        4. Type : Seamless / Welded / Fabricated
        5. Form : Straight Tee, Pipe Tee, Equal Tee
        6. Standard: ANSI/ASME, MSS, JIS, DIN, BS, etc.

        Grade of Equal Tee

        1. stainless steel Equal Tee, carbon steel Equal Tee, alloy steel Equal Tee, mild steel Equal Tee : ASTM A403 WP Gr. 304, 304H, 309, 310, 316, 316L, 317L, 321, 347, 904L
        2. Carbon Steel Equal Tee: ASTM A 234 WPB, WPBW, WPHY 42, WPHY 46, WPHY 52, WPH 60, WPHY 65 & WPHY 70.
        3. Low Temperature Carbon Steel Equal Tee: ASTM A420 WPL3, A420 WPL6
        4. Alloy Steel Equal Tee: ASTM / ASME A/SA 234 Gr. WP 1, WP 5, WP 9, WP 11, WP 12, WP 22, WP 91
        5. Duplex Steel Equal Tee : ASTM A 815, ASME SA 815 UNS NO S31803, S32205. Worst-off No. 1.4462
        6. Nickel Alloy Equal Tee : ASTM / ASME SB 336 UNS 2200 ( NICKEL 200 ), UNS 2201 (NICKEL 201 ), UNS 4400 (MONEL 400 ), UNS 8020 ( ALLOY 20 / 20 CB 3, UNS 8825 INCONEL (825), UNS 6600 (INCONEL 600 ), UNS 6601 ( INCONEL 601 ), UNS 6625 (INCONEL 625), UNS 10276 ( HASTELLOY C 276 )

    • We are the leading manufacturer and supplier of Equal Tee in Uganda. Get the best offer for high-quality Equal Tee from us in Uganda. We have plenty of stock of Equal Tee in the Uganda. Place your order online for Equal Tee in Uganda. We are the leading Equal Tee manufacturer in Uganda. Get your best quality Equal Tee in Uganda. Our Equal Tee Buttweld Pipe Fittings are manufactures with dissimilar grades of standard ranges and meets its provisions through international and national standards. Fitwel Industries LLP manufactures buttweld steel pipe tee fittings from stainless steel pipe tee fitting, carbon steel pipe tee fitting, aluminum pipe tee fitting, mild steel pipe tee fitting, alloy steel pipe tee fitting, mild steel pipe tee fitting, Hastelloy pipe tee fitting, Monel pipe tee fitting, nickel pipe tee fitting, Inconel pipe tee fitting, and all other available alloys in all schedules. A pipe fitting can be called a pipe tee whenever it is a 3-way pipe fitting, the most common type of pipe fitting as it is used to combine and/or split the flow of fluid as well as to change directions. We supply straight tees (equal tees) and reducing tees (unequal tees) to pipe fitting distributors throughout the Mumbai, India. Visit our laterals page to learn more about lateral tees.

      Available in:

      Standard and non-standard ANSI dimensions

      All schedules and alloys including carbon steel, aluminum, stainless steel, and others.

      Sizes:1″ thru 24″

      End Prep:

      1. Square cut
      2. 37 1/2 Beveled
      3. Roll Groove
      4. Cut Groove
      5. Flanged Ends

        6. Specification of Equal Tee

        1. Dimensions : ANSI/ASME B16.9, B16.28, MSS-SP-43.
        2. Thickness : Schedule 5S, 10S, 20S, S10, S20, S30, STD, 40S, S40, S60, XS, 80S, S80, S100, S120, S140, S160, XXS and etc.
        3. Size : Seamless ( 1/2″～24″), ERW / Welded / Fabricated Elbow (1/2″～48″)
        4. Type : Seamless / Welded / Fabricated
        5. Form : Straight Tee, Pipe Tee, Equal Tee
        6. Standard: ANSI/ASME, MSS, JIS, DIN, BS, etc.

        Grade of Equal Tee

        1. stainless steel Equal Tee, carbon steel Equal Tee, alloy steel Equal Tee, mild steel Equal Tee : ASTM A403 WP Gr. 304, 304H, 309, 310, 316, 316L, 317L, 321, 347, 904L
        2. Carbon Steel Equal Tee: ASTM A 234 WPB, WPBW, WPHY 42, WPHY 46, WPHY 52, WPH 60, WPHY 65 & WPHY 70.
        3. Low Temperature Carbon Steel Equal Tee: ASTM A420 WPL3, A420 WPL6
        4. Alloy Steel Equal Tee: ASTM / ASME A/SA 234 Gr. WP 1, WP 5, WP 9, WP 11, WP 12, WP 22, WP 91
        5. Duplex Steel Equal Tee : ASTM A 815, ASME SA 815 UNS NO S31803, S32205. Worst-off No. 1.4462
        6. Nickel Alloy Equal Tee : ASTM / ASME SB 336 UNS 2200 ( NICKEL 200 ), UNS 2201 (NICKEL 201 ), UNS 4400 (MONEL 400 ), UNS 8020 ( ALLOY 20 / 20 CB 3, UNS 8825 INCONEL (825), UNS 6600 (INCONEL 600 ), UNS 6601 ( INCONEL 601 ), UNS 6625 (INCONEL 625), UNS 10276 ( HASTELLOY C 276 )

    • We are the leading manufacturer and supplier of Equal Tee in Russia. Get the best offer for high-quality Equal Tee from us in Russia. We have plenty of stock of Equal Tee in the Russia. Place your order online for Equal Tee in Russia. We are the leading Equal Tee manufacturer in Russia. Get your best quality Equal Tee in Russia. Our Equal Tee Buttweld Pipe Fittings are manufactures with dissimilar grades of standard ranges and meets its provisions through international and national standards. Fitwel Industries LLP manufactures buttweld steel pipe tee fittings from stainless steel pipe tee fitting, carbon steel pipe tee fitting, aluminum pipe tee fitting, mild steel pipe tee fitting, alloy steel pipe tee fitting, mild steel pipe tee fitting, Hastelloy pipe tee fitting, Monel pipe tee fitting, nickel pipe tee fitting, Inconel pipe tee fitting, and all other available alloys in all schedules. A pipe fitting can be called a pipe tee whenever it is a 3-way pipe fitting, the most common type of pipe fitting as it is used to combine and/or split the flow of fluid as well as to change directions. We supply straight tees (equal tees) and reducing tees (unequal tees) to pipe fitting distributors throughout the Mumbai, India. Visit our laterals page to learn more about lateral tees.

      Available in:

      Standard and non-standard ANSI dimensions

      All schedules and alloys including carbon steel, aluminum, stainless steel, and others.

      Sizes:1″ thru 24″

      End Prep:

      1. Square cut
      2. 37 1/2 Beveled
      3. Roll Groove
      4. Cut Groove
      5. Flanged Ends

        6. Specification of Equal Tee

        1. Dimensions : ANSI/ASME B16.9, B16.28, MSS-SP-43.
        2. Thickness : Schedule 5S, 10S, 20S, S10, S20, S30, STD, 40S, S40, S60, XS, 80S, S80, S100, S120, S140, S160, XXS and etc.
        3. Size : Seamless ( 1/2″～24″), ERW / Welded / Fabricated Elbow (1/2″～48″)
        4. Type : Seamless / Welded / Fabricated
        5. Form : Straight Tee, Pipe Tee, Equal Tee
        6. Standard: ANSI/ASME, MSS, JIS, DIN, BS, etc.

        Grade of Equal Tee

        1. stainless steel Equal Tee, carbon steel Equal Tee, alloy steel Equal Tee, mild steel Equal Tee : ASTM A403 WP Gr. 304, 304H, 309, 310, 316, 316L, 317L, 321, 347, 904L
        2. Carbon Steel Equal Tee: ASTM A 234 WPB, WPBW, WPHY 42, WPHY 46, WPHY 52, WPH 60, WPHY 65 & WPHY 70.
        3. Low Temperature Carbon Steel Equal Tee: ASTM A420 WPL3, A420 WPL6
        4. Alloy Steel Equal Tee: ASTM / ASME A/SA 234 Gr. WP 1, WP 5, WP 9, WP 11, WP 12, WP 22, WP 91
        5. Duplex Steel Equal Tee : ASTM A 815, ASME SA 815 UNS NO S31803, S32205. Worst-off No. 1.4462
        6. Nickel Alloy Equal Tee : ASTM / ASME SB 336 UNS 2200 ( NICKEL 200 ), UNS 2201 (NICKEL 201 ), UNS 4400 (MONEL 400 ), UNS 8020 ( ALLOY 20 / 20 CB 3, UNS 8825 INCONEL (825), UNS 6600 (INCONEL 600 ), UNS 6601 ( INCONEL 601 ), UNS 6625 (INCONEL 625), UNS 10276 ( HASTELLOY C 276 )

    • We are the leading manufacturer and supplier of Equal Tee in Argentina. Get the best offer for high-quality Equal Tee from us in Argentina. We have plenty of stock of Equal Tee in the Argentina. Place your order online for Equal Tee in Argentina. We are the leading Equal Tee manufacturer in Argentina. Get your best quality Equal Tee in Argentina. Our Equal Tee Buttweld Pipe Fittings are manufactures with dissimilar grades of standard ranges and meets its provisions through international and national standards. Fitwel Industries LLP manufactures buttweld steel pipe tee fittings from stainless steel pipe tee fitting, carbon steel pipe tee fitting, aluminum pipe tee fitting, mild steel pipe tee fitting, alloy steel pipe tee fitting, mild steel pipe tee fitting, Hastelloy pipe tee fitting, Monel pipe tee fitting, nickel pipe tee fitting, Inconel pipe tee fitting, and all other available alloys in all schedules. A pipe fitting can be called a pipe tee whenever it is a 3-way pipe fitting, the most common type of pipe fitting as it is used to combine and/or split the flow of fluid as well as to change directions. We supply straight tees (equal tees) and reducing tees (unequal tees) to pipe fitting distributors throughout the Mumbai, India. Visit our laterals page to learn more about lateral tees.

      Available in:

      Standard and non-standard ANSI dimensions

      All schedules and alloys including carbon steel, aluminum, stainless steel, and others.

      Sizes:1″ thru 24″

      End Prep:

      1. Square cut
      2. 37 1/2 Beveled
      3. Roll Groove
      4. Cut Groove
      5. Flanged Ends

        6. Specification of Equal Tee

        1. Dimensions : ANSI/ASME B16.9, B16.28, MSS-SP-43.
        2. Thickness : Schedule 5S, 10S, 20S, S10, S20, S30, STD, 40S, S40, S60, XS, 80S, S80, S100, S120, S140, S160, XXS and etc.
        3. Size : Seamless ( 1/2″～24″), ERW / Welded / Fabricated Elbow (1/2″～48″)
        4. Type : Seamless / Welded / Fabricated
        5. Form : Straight Tee, Pipe Tee, Equal Tee
        6. Standard: ANSI/ASME, MSS, JIS, DIN, BS, etc.

        Grade of Equal Tee

        1. stainless steel Equal Tee, carbon steel Equal Tee, alloy steel Equal Tee, mild steel Equal Tee : ASTM A403 WP Gr. 304, 304H, 309, 310, 316, 316L, 317L, 321, 347, 904L
        2. Carbon Steel Equal Tee: ASTM A 234 WPB, WPBW, WPHY 42, WPHY 46, WPHY 52, WPH 60, WPHY 65 & WPHY 70.
        3. Low Temperature Carbon Steel Equal Tee: ASTM A420 WPL3, A420 WPL6
        4. Alloy Steel Equal Tee: ASTM / ASME A/SA 234 Gr. WP 1, WP 5, WP 9, WP 11, WP 12, WP 22, WP 91
        5. Duplex Steel Equal Tee : ASTM A 815, ASME SA 815 UNS NO S31803, S32205. Worst-off No. 1.4462
        6. Nickel Alloy Equal Tee : ASTM / ASME SB 336 UNS 2200 ( NICKEL 200 ), UNS 2201 (NICKEL 201 ), UNS 4400 (MONEL 400 ), UNS 8020 ( ALLOY 20 / 20 CB 3, UNS 8825 INCONEL (825), UNS 6600 (INCONEL 600 ), UNS 6601 ( INCONEL 601 ), UNS 6625 (INCONEL 625), UNS 10276 ( HASTELLOY C 276 )

    • We are the leading manufacturer and supplier of Equal Tee in Ecuador. Get the best offer for high-quality Equal Tee from us in Ecuador. We have plenty of stock of Equal Tee in the Ecuador. Place your order online for Equal Tee in Ecuador. We are the leading Equal Tee manufacturer in Ecuador. Get your best quality Equal Tee in Ecuador. Our Equal Tee Buttweld Pipe Fittings are manufactures with dissimilar grades of standard ranges and meets its provisions through international and national standards. Fitwel Industries LLP manufactures buttweld steel pipe tee fittings from stainless steel pipe tee fitting, carbon steel pipe tee fitting, aluminum pipe tee fitting, mild steel pipe tee fitting, alloy steel pipe tee fitting, mild steel pipe tee fitting, Hastelloy pipe tee fitting, Monel pipe tee fitting, nickel pipe tee fitting, Inconel pipe tee fitting, and all other available alloys in all schedules. A pipe fitting can be called a pipe tee whenever it is a 3-way pipe fitting, the most common type of pipe fitting as it is used to combine and/or split the flow of fluid as well as to change directions. We supply straight tees (equal tees) and reducing tees (unequal tees) to pipe fitting distributors throughout the Mumbai, India. Visit our laterals page to learn more about lateral tees.

      Available in:

      Standard and non-standard ANSI dimensions

      All schedules and alloys including carbon steel, aluminum, stainless steel, and others.

      Sizes:1″ thru 24″

      End Prep:

      1. Square cut
      2. 37 1/2 Beveled
      3. Roll Groove
      4. Cut Groove
      5. Flanged Ends

        6. Specification of Equal Tee

        1. Dimensions : ANSI/ASME B16.9, B16.28, MSS-SP-43.
        2. Thickness : Schedule 5S, 10S, 20S, S10, S20, S30, STD, 40S, S40, S60, XS, 80S, S80, S100, S120, S140, S160, XXS and etc.
        3. Size : Seamless ( 1/2″～24″), ERW / Welded / Fabricated Elbow (1/2″～48″)
        4. Type : Seamless / Welded / Fabricated
        5. Form : Straight Tee, Pipe Tee, Equal Tee
        6. Standard: ANSI/ASME, MSS, JIS, DIN, BS, etc.

        Grade of Equal Tee

        1. stainless steel Equal Tee, carbon steel Equal Tee, alloy steel Equal Tee, mild steel Equal Tee : ASTM A403 WP Gr. 304, 304H, 309, 310, 316, 316L, 317L, 321, 347, 904L
        2. Carbon Steel Equal Tee: ASTM A 234 WPB, WPBW, WPHY 42, WPHY 46, WPHY 52, WPH 60, WPHY 65 & WPHY 70.
        3. Low Temperature Carbon Steel Equal Tee: ASTM A420 WPL3, A420 WPL6
        4. Alloy Steel Equal Tee: ASTM / ASME A/SA 234 Gr. WP 1, WP 5, WP 9, WP 11, WP 12, WP 22, WP 91
        5. Duplex Steel Equal Tee : ASTM A 815, ASME SA 815 UNS NO S31803, S32205. Worst-off No. 1.4462
        6. Nickel Alloy Equal Tee : ASTM / ASME SB 336 UNS 2200 ( NICKEL 200 ), UNS 2201 (NICKEL 201 ), UNS 4400 (MONEL 400 ), UNS 8020 ( ALLOY 20 / 20 CB 3, UNS 8825 INCONEL (825), UNS 6600 (INCONEL 600 ), UNS 6601 ( INCONEL 601 ), UNS 6625 (INCONEL 625), UNS 10276 ( HASTELLOY C 276 )

    • We are the leading manufacturer and supplier of Equal Tee in Uruguay. Get the best offer for high-quality Equal Tee from us in Uruguay. We have plenty of stock of Equal Tee in the Uruguay. Place your order online for Equal Tee in Uruguay. We are the leading Equal Tee manufacturer in Uruguay. Get your best quality Equal Tee in Uruguay. Our Equal Tee Buttweld Pipe Fittings are manufactures with dissimilar grades of standard ranges and meets its provisions through international and national standards. Fitwel Industries LLP manufactures buttweld steel pipe tee fittings from stainless steel pipe tee fitting, carbon steel pipe tee fitting, aluminum pipe tee fitting, mild steel pipe tee fitting, alloy steel pipe tee fitting, mild steel pipe tee fitting, Hastelloy pipe tee fitting, Monel pipe tee fitting, nickel pipe tee fitting, Inconel pipe tee fitting, and all other available alloys in all schedules. A pipe fitting can be called a pipe tee whenever it is a 3-way pipe fitting, the most common type of pipe fitting as it is used to combine and/or split the flow of fluid as well as to change directions. We supply straight tees (equal tees) and reducing tees (unequal tees) to pipe fitting distributors throughout the Mumbai, India. Visit our laterals page to learn more about lateral tees.

      Available in:

      Standard and non-standard ANSI dimensions

      All schedules and alloys including carbon steel, aluminum, stainless steel, and others.

      Sizes:1″ thru 24″

      End Prep:

      1. Square cut
      2. 37 1/2 Beveled
      3. Roll Groove
      4. Cut Groove
      5. Flanged Ends

        6. Specification of Equal Tee

        1. Dimensions : ANSI/ASME B16.9, B16.28, MSS-SP-43.
        2. Thickness : Schedule 5S, 10S, 20S, S10, S20, S30, STD, 40S, S40, S60, XS, 80S, S80, S100, S120, S140, S160, XXS and etc.
        3. Size : Seamless ( 1/2″～24″), ERW / Welded / Fabricated Elbow (1/2″～48″)
        4. Type : Seamless / Welded / Fabricated
        5. Form : Straight Tee, Pipe Tee, Equal Tee
        6. Standard: ANSI/ASME, MSS, JIS, DIN, BS, etc.

        Grade of Equal Tee

        1. stainless steel Equal Tee, carbon steel Equal Tee, alloy steel Equal Tee, mild steel Equal Tee : ASTM A403 WP Gr. 304, 304H, 309, 310, 316, 316L, 317L, 321, 347, 904L
        2. Carbon Steel Equal Tee: ASTM A 234 WPB, WPBW, WPHY 42, WPHY 46, WPHY 52, WPH 60, WPHY 65 & WPHY 70.
        3. Low Temperature Carbon Steel Equal Tee: ASTM A420 WPL3, A420 WPL6
        4. Alloy Steel Equal Tee: ASTM / ASME A/SA 234 Gr. WP 1, WP 5, WP 9, WP 11, WP 12, WP 22, WP 91
        5. Duplex Steel Equal Tee : ASTM A 815, ASME SA 815 UNS NO S31803, S32205. Worst-off No. 1.4462
        6. Nickel Alloy Equal Tee : ASTM / ASME SB 336 UNS 2200 ( NICKEL 200 ), UNS 2201 (NICKEL 201 ), UNS 4400 (MONEL 400 ), UNS 8020 ( ALLOY 20 / 20 CB 3, UNS 8825 INCONEL (825), UNS 6600 (INCONEL 600 ), UNS 6601 ( INCONEL 601 ), UNS 6625 (INCONEL 625), UNS 10276 ( HASTELLOY C 276 )

    • We are the leading manufacturer and supplier of Equal Tee in Indonesia. Get the best offer for high-quality Equal Tee from us in Indonesia. We have plenty of stock of Equal Tee in the Indonesia. Place your order online for Equal Tee in Indonesia. We are the leading Equal Tee manufacturer in Indonesia. Get your best quality Equal Tee in Indonesia. Our Equal Tee Buttweld Pipe Fittings are manufactures with dissimilar grades of standard ranges and meets its provisions through international and national standards. Fitwel Industries LLP manufactures buttweld steel pipe tee fittings from stainless steel pipe tee fitting, carbon steel pipe tee fitting, aluminum pipe tee fitting, mild steel pipe tee fitting, alloy steel pipe tee fitting, mild steel pipe tee fitting, Hastelloy pipe tee fitting, Monel pipe tee fitting, nickel pipe tee fitting, Inconel pipe tee fitting, and all other available alloys in all schedules. A pipe fitting can be called a pipe tee whenever it is a 3-way pipe fitting, the most common type of pipe fitting as it is used to combine and/or split the flow of fluid as well as to change directions. We supply straight tees (equal tees) and reducing tees (unequal tees) to pipe fitting distributors throughout the Mumbai, India. Visit our laterals page to learn more about lateral tees.

      Available in:

      Standard and non-standard ANSI dimensions

      All schedules and alloys including carbon steel, aluminum, stainless steel, and others.

      Sizes:1″ thru 24″

      End Prep:

      1. Square cut
      2. 37 1/2 Beveled
      3. Roll Groove
      4. Cut Groove
      5. Flanged Ends

        6. Specification of Equal Tee

        1. Dimensions : ANSI/ASME B16.9, B16.28, MSS-SP-43.
        2. Thickness : Schedule 5S, 10S, 20S, S10, S20, S30, STD, 40S, S40, S60, XS, 80S, S80, S100, S120, S140, S160, XXS and etc.
        3. Size : Seamless ( 1/2″～24″), ERW / Welded / Fabricated Elbow (1/2″～48″)
        4. Type : Seamless / Welded / Fabricated
        5. Form : Straight Tee, Pipe Tee, Equal Tee
        6. Standard: ANSI/ASME, MSS, JIS, DIN, BS, etc.

        Grade of Equal Tee

        1. stainless steel Equal Tee, carbon steel Equal Tee, alloy steel Equal Tee, mild steel Equal Tee : ASTM A403 WP Gr. 304, 304H, 309, 310, 316, 316L, 317L, 321, 347, 904L
        2. Carbon Steel Equal Tee: ASTM A 234 WPB, WPBW, WPHY 42, WPHY 46, WPHY 52, WPH 60, WPHY 65 & WPHY 70.
        3. Low Temperature Carbon Steel Equal Tee: ASTM A420 WPL3, A420 WPL6
        4. Alloy Steel Equal Tee: ASTM / ASME A/SA 234 Gr. WP 1, WP 5, WP 9, WP 11, WP 12, WP 22, WP 91
        5. Duplex Steel Equal Tee : ASTM A 815, ASME SA 815 UNS NO S31803, S32205. Worst-off No. 1.4462
        6. Nickel Alloy Equal Tee : ASTM / ASME SB 336 UNS 2200 ( NICKEL 200 ), UNS 2201 (NICKEL 201 ), UNS 4400 (MONEL 400 ), UNS 8020 ( ALLOY 20 / 20 CB 3, UNS 8825 INCONEL (825), UNS 6600 (INCONEL 600 ), UNS 6601 ( INCONEL 601 ), UNS 6625 (INCONEL 625), UNS 10276 ( HASTELLOY C 276 )

    • We are the leading manufacturer and supplier of Equal Tee in SriLanka. Get the best offer for high-quality Equal Tee from us in SriLanka. We have plenty of stock of Equal Tee in the SriLanka. Place your order online for Equal Tee in SriLanka. We are the leading Equal Tee manufacturer in SriLanka. Get your best quality Equal Tee in SriLanka. Our Equal Tee Buttweld Pipe Fittings are manufactures with dissimilar grades of standard ranges and meets its provisions through international and national standards. Fitwel Industries LLP manufactures buttweld steel pipe tee fittings from stainless steel pipe tee fitting, carbon steel pipe tee fitting, aluminum pipe tee fitting, mild steel pipe tee fitting, alloy steel pipe tee fitting, mild steel pipe tee fitting, Hastelloy pipe tee fitting, Monel pipe tee fitting, nickel pipe tee fitting, Inconel pipe tee fitting, and all other available alloys in all schedules. A pipe fitting can be called a pipe tee whenever it is a 3-way pipe fitting, the most common type of pipe fitting as it is used to combine and/or split the flow of fluid as well as to change directions. We supply straight tees (equal tees) and reducing tees (unequal tees) to pipe fitting distributors throughout the Mumbai, India. Visit our laterals page to learn more about lateral tees.

      Available in:

      Standard and non-standard ANSI dimensions

      All schedules and alloys including carbon steel, aluminum, stainless steel, and others.

      Sizes:1″ thru 24″

      End Prep:

      1. Square cut
      2. 37 1/2 Beveled
      3. Roll Groove
      4. Cut Groove
      5. Flanged Ends

        6. Specification of Equal Tee

        1. Dimensions : ANSI/ASME B16.9, B16.28, MSS-SP-43.
        2. Thickness : Schedule 5S, 10S, 20S, S10, S20, S30, STD, 40S, S40, S60, XS, 80S, S80, S100, S120, S140, S160, XXS and etc.
        3. Size : Seamless ( 1/2″～24″), ERW / Welded / Fabricated Elbow (1/2″～48″)
        4. Type : Seamless / Welded / Fabricated
        5. Form : Straight Tee, Pipe Tee, Equal Tee
        6. Standard: ANSI/ASME, MSS, JIS, DIN, BS, etc.

        Grade of Equal Tee

        1. stainless steel Equal Tee, carbon steel Equal Tee, alloy steel Equal Tee, mild steel Equal Tee : ASTM A403 WP Gr. 304, 304H, 309, 310, 316, 316L, 317L, 321, 347, 904L
        2. Carbon Steel Equal Tee: ASTM A 234 WPB, WPBW, WPHY 42, WPHY 46, WPHY 52, WPH 60, WPHY 65 & WPHY 70.
        3. Low Temperature Carbon Steel Equal Tee: ASTM A420 WPL3, A420 WPL6
        4. Alloy Steel Equal Tee: ASTM / ASME A/SA 234 Gr. WP 1, WP 5, WP 9, WP 11, WP 12, WP 22, WP 91
        5. Duplex Steel Equal Tee : ASTM A 815, ASME SA 815 UNS NO S31803, S32205. Worst-off No. 1.4462
        6. Nickel Alloy Equal Tee : ASTM / ASME SB 336 UNS 2200 ( NICKEL 200 ), UNS 2201 (NICKEL 201 ), UNS 4400 (MONEL 400 ), UNS 8020 ( ALLOY 20 / 20 CB 3, UNS 8825 INCONEL (825), UNS 6600 (INCONEL 600 ), UNS 6601 ( INCONEL 601 ), UNS 6625 (INCONEL 625), UNS 10276 ( HASTELLOY C 276 )

    • We are the leading manufacturer and supplier of Equal Tee in Vietnam. Get the best offer for high-quality Equal Tee from us in Vietnam. We have plenty of stock of Equal Tee in the Vietnam. Place your order online for Equal Tee in Vietnam. We are the leading Equal Tee manufacturer in Vietnam. Get your best quality Equal Tee in Vietnam. Our Equal Tee Buttweld Pipe Fittings are manufactures with dissimilar grades of standard ranges and meets its provisions through international and national standards. Fitwel Industries LLP manufactures buttweld steel pipe tee fittings from stainless steel pipe tee fitting, carbon steel pipe tee fitting, aluminum pipe tee fitting, mild steel pipe tee fitting, alloy steel pipe tee fitting, mild steel pipe tee fitting, Hastelloy pipe tee fitting, Monel pipe tee fitting, nickel pipe tee fitting, Inconel pipe tee fitting, and all other available alloys in all schedules. A pipe fitting can be called a pipe tee whenever it is a 3-way pipe fitting, the most common type of pipe fitting as it is used to combine and/or split the flow of fluid as well as to change directions. We supply straight tees (equal tees) and reducing tees (unequal tees) to pipe fitting distributors throughout the Mumbai, India. Visit our laterals page to learn more about lateral tees.

      Available in:

      Standard and non-standard ANSI dimensions

      All schedules and alloys including carbon steel, aluminum, stainless steel, and others.

      Sizes:1″ thru 24″

      End Prep:

      1. Square cut
      2. 37 1/2 Beveled
      3. Roll Groove
      4. Cut Groove
      5. Flanged Ends

        6. Specification of Equal Tee

        1. Dimensions : ANSI/ASME B16.9, B16.28, MSS-SP-43.
        2. Thickness : Schedule 5S, 10S, 20S, S10, S20, S30, STD, 40S, S40, S60, XS, 80S, S80, S100, S120, S140, S160, XXS and etc.
        3. Size : Seamless ( 1/2″～24″), ERW / Welded / Fabricated Elbow (1/2″～48″)
        4. Type : Seamless / Welded / Fabricated
        5. Form : Straight Tee, Pipe Tee, Equal Tee
        6. Standard: ANSI/ASME, MSS, JIS, DIN, BS, etc.

        Grade of Equal Tee

        1. stainless steel Equal Tee, carbon steel Equal Tee, alloy steel Equal Tee, mild steel Equal Tee : ASTM A403 WP Gr. 304, 304H, 309, 310, 316, 316L, 317L, 321, 347, 904L
        2. Carbon Steel Equal Tee: ASTM A 234 WPB, WPBW, WPHY 42, WPHY 46, WPHY 52, WPH 60, WPHY 65 & WPHY 70.
        3. Low Temperature Carbon Steel Equal Tee: ASTM A420 WPL3, A420 WPL6
        4. Alloy Steel Equal Tee: ASTM / ASME A/SA 234 Gr. WP 1, WP 5, WP 9, WP 11, WP 12, WP 22, WP 91
        5. Duplex Steel Equal Tee : ASTM A 815, ASME SA 815 UNS NO S31803, S32205. Worst-off No. 1.4462
        6. Nickel Alloy Equal Tee : ASTM / ASME SB 336 UNS 2200 ( NICKEL 200 ), UNS 2201 (NICKEL 201 ), UNS 4400 (MONEL 400 ), UNS 8020 ( ALLOY 20 / 20 CB 3, UNS 8825 INCONEL (825), UNS 6600 (INCONEL 600 ), UNS 6601 ( INCONEL 601 ), UNS 6625 (INCONEL 625), UNS 10276 ( HASTELLOY C 276 )

    • We are the leading manufacturer and supplier of Equal Tee in Kuwait. Get the best offer for high-quality Equal Tee from us in Kuwait. We have plenty of stock of Equal Tee in the Kuwait. Place your order online for Equal Tee in Kuwait. We are the leading Equal Tee manufacturer in Kuwait. Get your best quality Equal Tee in Kuwait. Our Equal Tee Buttweld Pipe Fittings are manufactures with dissimilar grades of standard ranges and meets its provisions through international and national standards. Fitwel Industries LLP manufactures buttweld steel pipe tee fittings from stainless steel pipe tee fitting, carbon steel pipe tee fitting, aluminum pipe tee fitting, mild steel pipe tee fitting, alloy steel pipe tee fitting, mild steel pipe tee fitting, Hastelloy pipe tee fitting, Monel pipe tee fitting, nickel pipe tee fitting, Inconel pipe tee fitting, and all other available alloys in all schedules. A pipe fitting can be called a pipe tee whenever it is a 3-way pipe fitting, the most common type of pipe fitting as it is used to combine and/or split the flow of fluid as well as to change directions. We supply straight tees (equal tees) and reducing tees (unequal tees) to pipe fitting distributors throughout the Mumbai, India. Visit our laterals page to learn more about lateral tees.

      Available in:

      Standard and non-standard ANSI dimensions

      All schedules and alloys including carbon steel, aluminum, stainless steel, and others.

      Sizes:1″ thru 24″

      End Prep:

      1. Square cut
      2. 37 1/2 Beveled
      3. Roll Groove
      4. Cut Groove
      5. Flanged Ends

        6. Specification of Equal Tee

        1. Dimensions : ANSI/ASME B16.9, B16.28, MSS-SP-43.
        2. Thickness : Schedule 5S, 10S, 20S, S10, S20, S30, STD, 40S, S40, S60, XS, 80S, S80, S100, S120, S140, S160, XXS and etc.
        3. Size : Seamless ( 1/2″～24″), ERW / Welded / Fabricated Elbow (1/2″～48″)
        4. Type : Seamless / Welded / Fabricated
        5. Form : Straight Tee, Pipe Tee, Equal Tee
        6. Standard: ANSI/ASME, MSS, JIS, DIN, BS, etc.

        Grade of Equal Tee

        1. stainless steel Equal Tee, carbon steel Equal Tee, alloy steel Equal Tee, mild steel Equal Tee : ASTM A403 WP Gr. 304, 304H, 309, 310, 316, 316L, 317L, 321, 347, 904L
        2. Carbon Steel Equal Tee: ASTM A 234 WPB, WPBW, WPHY 42, WPHY 46, WPHY 52, WPH 60, WPHY 65 & WPHY 70.
        3. Low Temperature Carbon Steel Equal Tee: ASTM A420 WPL3, A420 WPL6
        4. Alloy Steel Equal Tee: ASTM / ASME A/SA 234 Gr. WP 1, WP 5, WP 9, WP 11, WP 12, WP 22, WP 91
        5. Duplex Steel Equal Tee : ASTM A 815, ASME SA 815 UNS NO S31803, S32205. Worst-off No. 1.4462
        6. Nickel Alloy Equal Tee : ASTM / ASME SB 336 UNS 2200 ( NICKEL 200 ), UNS 2201 (NICKEL 201 ), UNS 4400 (MONEL 400 ), UNS 8020 ( ALLOY 20 / 20 CB 3, UNS 8825 INCONEL (825), UNS 6600 (INCONEL 600 ), UNS 6601 ( INCONEL 601 ), UNS 6625 (INCONEL 625), UNS 10276 ( HASTELLOY C 276 )

    • We are the leading manufacturer and supplier of Equal Tee in Jordan. Get the best offer for high-quality Equal Tee from us in Jordan. We have plenty of stock of Equal Tee in the Jordan. Place your order online for Equal Tee in Jordan. We are the leading Equal Tee manufacturer in Jordan. Get your best quality Equal Tee in Jordan. Our Equal Tee Buttweld Pipe Fittings are manufactures with dissimilar grades of standard ranges and meets its provisions through international and national standards. Fitwel Industries LLP manufactures buttweld steel pipe tee fittings from stainless steel pipe tee fitting, carbon steel pipe tee fitting, aluminum pipe tee fitting, mild steel pipe tee fitting, alloy steel pipe tee fitting, mild steel pipe tee fitting, Hastelloy pipe tee fitting, Monel pipe tee fitting, nickel pipe tee fitting, Inconel pipe tee fitting, and all other available alloys in all schedules. A pipe fitting can be called a pipe tee whenever it is a 3-way pipe fitting, the most common type of pipe fitting as it is used to combine and/or split the flow of fluid as well as to change directions. We supply straight tees (equal tees) and reducing tees (unequal tees) to pipe fitting distributors throughout the Mumbai, India. Visit our laterals page to learn more about lateral tees.

      Available in:

      Standard and non-standard ANSI dimensions

      All schedules and alloys including carbon steel, aluminum, stainless steel, and others.

      Sizes:1″ thru 24″

      End Prep:

      1. Square cut
      2. 37 1/2 Beveled
      3. Roll Groove
      4. Cut Groove
      5. Flanged Ends

        6. Specification of Equal Tee

        1. Dimensions : ANSI/ASME B16.9, B16.28, MSS-SP-43.
        2. Thickness : Schedule 5S, 10S, 20S, S10, S20, S30, STD, 40S, S40, S60, XS, 80S, S80, S100, S120, S140, S160, XXS and etc.
        3. Size : Seamless ( 1/2″～24″), ERW / Welded / Fabricated Elbow (1/2″～48″)
        4. Type : Seamless / Welded / Fabricated
        5. Form : Straight Tee, Pipe Tee, Equal Tee
        6. Standard: ANSI/ASME, MSS, JIS, DIN, BS, etc.

        Grade of Equal Tee

        1. stainless steel Equal Tee, carbon steel Equal Tee, alloy steel Equal Tee, mild steel Equal Tee : ASTM A403 WP Gr. 304, 304H, 309, 310, 316, 316L, 317L, 321, 347, 904L
        2. Carbon Steel Equal Tee: ASTM A 234 WPB, WPBW, WPHY 42, WPHY 46, WPHY 52, WPH 60, WPHY 65 & WPHY 70.
        3. Low Temperature Carbon Steel Equal Tee: ASTM A420 WPL3, A420 WPL6
        4. Alloy Steel Equal Tee: ASTM / ASME A/SA 234 Gr. WP 1, WP 5, WP 9, WP 11, WP 12, WP 22, WP 91
        5. Duplex Steel Equal Tee : ASTM A 815, ASME SA 815 UNS NO S31803, S32205. Worst-off No. 1.4462
        6. Nickel Alloy Equal Tee : ASTM / ASME SB 336 UNS 2200 ( NICKEL 200 ), UNS 2201 (NICKEL 201 ), UNS 4400 (MONEL 400 ), UNS 8020 ( ALLOY 20 / 20 CB 3, UNS 8825 INCONEL (825), UNS 6600 (INCONEL 600 ), UNS 6601 ( INCONEL 601 ), UNS 6625 (INCONEL 625), UNS 10276 ( HASTELLOY C 276 )

    • We are the leading manufacturer and supplier of Equal Tee in Netherlands. Get the best offer for high-quality Equal Tee from us in Netherlands. We have plenty of stock of Equal Tee in the Netherlands. Place your order online for Equal Tee in Netherlands. We are the leading Equal Tee manufacturer in Netherlands. Get your best quality Equal Tee in Netherlands. Our Equal Tee Buttweld Pipe Fittings are manufactures with dissimilar grades of standard ranges and meets its provisions through international and national standards. Fitwel Industries LLP manufactures buttweld steel pipe tee fittings from stainless steel pipe tee fitting, carbon steel pipe tee fitting, aluminum pipe tee fitting, mild steel pipe tee fitting, alloy steel pipe tee fitting, mild steel pipe tee fitting, Hastelloy pipe tee fitting, Monel pipe tee fitting, nickel pipe tee fitting, Inconel pipe tee fitting, and all other available alloys in all schedules. A pipe fitting can be called a pipe tee whenever it is a 3-way pipe fitting, the most common type of pipe fitting as it is used to combine and/or split the flow of fluid as well as to change directions. We supply straight tees (equal tees) and reducing tees (unequal tees) to pipe fitting distributors throughout the Mumbai, India. Visit our laterals page to learn more about lateral tees.

      Available in:

      Standard and non-standard ANSI dimensions

      All schedules and alloys including carbon steel, aluminum, stainless steel, and others.

      Sizes:1″ thru 24″

      End Prep:

      1. Square cut
      2. 37 1/2 Beveled
      3. Roll Groove
      4. Cut Groove
      5. Flanged Ends

        6. Specification of Equal Tee

        1. Dimensions : ANSI/ASME B16.9, B16.28, MSS-SP-43.
        2. Thickness : Schedule 5S, 10S, 20S, S10, S20, S30, STD, 40S, S40, S60, XS, 80S, S80, S100, S120, S140, S160, XXS and etc.
        3. Size : Seamless ( 1/2″～24″), ERW / Welded / Fabricated Elbow (1/2″～48″)
        4. Type : Seamless / Welded / Fabricated
        5. Form : Straight Tee, Pipe Tee, Equal Tee
        6. Standard: ANSI/ASME, MSS, JIS, DIN, BS, etc.

        Grade of Equal Tee

        1. stainless steel Equal Tee, carbon steel Equal Tee, alloy steel Equal Tee, mild steel Equal Tee : ASTM A403 WP Gr. 304, 304H, 309, 310, 316, 316L, 317L, 321, 347, 904L
        2. Carbon Steel Equal Tee: ASTM A 234 WPB, WPBW, WPHY 42, WPHY 46, WPHY 52, WPH 60, WPHY 65 & WPHY 70.
        3. Low Temperature Carbon Steel Equal Tee: ASTM A420 WPL3, A420 WPL6
        4. Alloy Steel Equal Tee: ASTM / ASME A/SA 234 Gr. WP 1, WP 5, WP 9, WP 11, WP 12, WP 22, WP 91
        5. Duplex Steel Equal Tee : ASTM A 815, ASME SA 815 UNS NO S31803, S32205. Worst-off No. 1.4462
        6. Nickel Alloy Equal Tee : ASTM / ASME SB 336 UNS 2200 ( NICKEL 200 ), UNS 2201 (NICKEL 201 ), UNS 4400 (MONEL 400 ), UNS 8020 ( ALLOY 20 / 20 CB 3, UNS 8825 INCONEL (825), UNS 6600 (INCONEL 600 ), UNS 6601 ( INCONEL 601 ), UNS 6625 (INCONEL 625), UNS 10276 ( HASTELLOY C 276 )

    • We are the leading manufacturer and supplier of Equal Tee in Greeces. Get the best offer for high-quality Equal Tee from us in Greeces. We have plenty of stock of Equal Tee in the Greeces. Place your order online for Equal Tee in Greeces. We are the leading Equal Tee manufacturer in Greeces. Get your best quality Equal Tee in Greeces. Our Equal Tee Buttweld Pipe Fittings are manufactures with dissimilar grades of standard ranges and meets its provisions through international and national standards. Fitwel Industries LLP manufactures buttweld steel pipe tee fittings from stainless steel pipe tee fitting, carbon steel pipe tee fitting, aluminum pipe tee fitting, mild steel pipe tee fitting, alloy steel pipe tee fitting, mild steel pipe tee fitting, Hastelloy pipe tee fitting, Monel pipe tee fitting, nickel pipe tee fitting, Inconel pipe tee fitting, and all other available alloys in all schedules. A pipe fitting can be called a pipe tee whenever it is a 3-way pipe fitting, the most common type of pipe fitting as it is used to combine and/or split the flow of fluid as well as to change directions. We supply straight tees (equal tees) and reducing tees (unequal tees) to pipe fitting distributors throughout the Mumbai, India. Visit our laterals page to learn more about lateral tees.

      Available in:

      Standard and non-standard ANSI dimensions

      All schedules and alloys including carbon steel, aluminum, stainless steel, and others.

      Sizes:1″ thru 24″

      End Prep:

      1. Square cut
      2. 37 1/2 Beveled
      3. Roll Groove
      4. Cut Groove
      5. Flanged Ends

        6. Specification of Equal Tee

        1. Dimensions : ANSI/ASME B16.9, B16.28, MSS-SP-43.
        2. Thickness : Schedule 5S, 10S, 20S, S10, S20, S30, STD, 40S, S40, S60, XS, 80S, S80, S100, S120, S140, S160, XXS and etc.
        3. Size : Seamless ( 1/2″～24″), ERW / Welded / Fabricated Elbow (1/2″～48″)
        4. Type : Seamless / Welded / Fabricated
        5. Form : Straight Tee, Pipe Tee, Equal Tee
        6. Standard: ANSI/ASME, MSS, JIS, DIN, BS, etc.

        Grade of Equal Tee

        1. stainless steel Equal Tee, carbon steel Equal Tee, alloy steel Equal Tee, mild steel Equal Tee : ASTM A403 WP Gr. 304, 304H, 309, 310, 316, 316L, 317L, 321, 347, 904L
        2. Carbon Steel Equal Tee: ASTM A 234 WPB, WPBW, WPHY 42, WPHY 46, WPHY 52, WPH 60, WPHY 65 & WPHY 70.
        3. Low Temperature Carbon Steel Equal Tee: ASTM A420 WPL3, A420 WPL6
        4. Alloy Steel Equal Tee: ASTM / ASME A/SA 234 Gr. WP 1, WP 5, WP 9, WP 11, WP 12, WP 22, WP 91
        5. Duplex Steel Equal Tee : ASTM A 815, ASME SA 815 UNS NO S31803, S32205. Worst-off No. 1.4462
        6. Nickel Alloy Equal Tee : ASTM / ASME SB 336 UNS 2200 ( NICKEL 200 ), UNS 2201 (NICKEL 201 ), UNS 4400 (MONEL 400 ), UNS 8020 ( ALLOY 20 / 20 CB 3, UNS 8825 INCONEL (825), UNS 6600 (INCONEL 600 ), UNS 6601 ( INCONEL 601 ), UNS 6625 (INCONEL 625), UNS 10276 ( HASTELLOY C 276 )

    • We are the leading manufacturer and supplier of Equal Tee in Belgiums. Get the best offer for high-quality Equal Tee from us in Belgiums. We have plenty of stock of Equal Tee in the Belgiums. Place your order online for Equal Tee in Belgiums. We are the leading Equal Tee manufacturer in Belgiums. Get your best quality Equal Tee in Belgiums. Our Equal Tee Buttweld Pipe Fittings are manufactures with dissimilar grades of standard ranges and meets its provisions through international and national standards. Fitwel Industries LLP manufactures buttweld steel pipe tee fittings from stainless steel pipe tee fitting, carbon steel pipe tee fitting, aluminum pipe tee fitting, mild steel pipe tee fitting, alloy steel pipe tee fitting, mild steel pipe tee fitting, Hastelloy pipe tee fitting, Monel pipe tee fitting, nickel pipe tee fitting, Inconel pipe tee fitting, and all other available alloys in all schedules. A pipe fitting can be called a pipe tee whenever it is a 3-way pipe fitting, the most common type of pipe fitting as it is used to combine and/or split the flow of fluid as well as to change directions. We supply straight tees (equal tees) and reducing tees (unequal tees) to pipe fitting distributors throughout the Mumbai, India. Visit our laterals page to learn more about lateral tees.

      Available in:

      Standard and non-standard ANSI dimensions

      All schedules and alloys including carbon steel, aluminum, stainless steel, and others.

      Sizes:1″ thru 24″

      End Prep:

      1. Square cut
      2. 37 1/2 Beveled
      3. Roll Groove
      4. Cut Groove
      5. Flanged Ends

        6. Specification of Equal Tee

        1. Dimensions : ANSI/ASME B16.9, B16.28, MSS-SP-43.
        2. Thickness : Schedule 5S, 10S, 20S, S10, S20, S30, STD, 40S, S40, S60, XS, 80S, S80, S100, S120, S140, S160, XXS and etc.
        3. Size : Seamless ( 1/2″～24″), ERW / Welded / Fabricated Elbow (1/2″～48″)
        4. Type : Seamless / Welded / Fabricated
        5. Form : Straight Tee, Pipe Tee, Equal Tee
        6. Standard: ANSI/ASME, MSS, JIS, DIN, BS, etc.

        Grade of Equal Tee

        1. stainless steel Equal Tee, carbon steel Equal Tee, alloy steel Equal Tee, mild steel Equal Tee : ASTM A403 WP Gr. 304, 304H, 309, 310, 316, 316L, 317L, 321, 347, 904L
        2. Carbon Steel Equal Tee: ASTM A 234 WPB, WPBW, WPHY 42, WPHY 46, WPHY 52, WPH 60, WPHY 65 & WPHY 70.
        3. Low Temperature Carbon Steel Equal Tee: ASTM A420 WPL3, A420 WPL6
        4. Alloy Steel Equal Tee: ASTM / ASME A/SA 234 Gr. WP 1, WP 5, WP 9, WP 11, WP 12, WP 22, WP 91
        5. Duplex Steel Equal Tee : ASTM A 815, ASME SA 815 UNS NO S31803, S32205. Worst-off No. 1.4462
        6. Nickel Alloy Equal Tee : ASTM / ASME SB 336 UNS 2200 ( NICKEL 200 ), UNS 2201 (NICKEL 201 ), UNS 4400 (MONEL 400 ), UNS 8020 ( ALLOY 20 / 20 CB 3, UNS 8825 INCONEL (825), UNS 6600 (INCONEL 600 ), UNS 6601 ( INCONEL 601 ), UNS 6625 (INCONEL 625), UNS 10276 ( HASTELLOY C 276 )

    • We are the leading manufacturer and supplier of Equal Tee in Algerias. Get the best offer for high-quality Equal Tee from us in Algerias. We have plenty of stock of Equal Tee in the Algerias. Place your order online for Equal Tee in Algerias. We are the leading Equal Tee manufacturer in Algerias. Get your best quality Equal Tee in Algerias. Our Equal Tee Buttweld Pipe Fittings are manufactures with dissimilar grades of standard ranges and meets its provisions through international and national standards. Fitwel Industries LLP manufactures buttweld steel pipe tee fittings from stainless steel pipe tee fitting, carbon steel pipe tee fitting, aluminum pipe tee fitting, mild steel pipe tee fitting, alloy steel pipe tee fitting, mild steel pipe tee fitting, Hastelloy pipe tee fitting, Monel pipe tee fitting, nickel pipe tee fitting, Inconel pipe tee fitting, and all other available alloys in all schedules. A pipe fitting can be called a pipe tee whenever it is a 3-way pipe fitting, the most common type of pipe fitting as it is used to combine and/or split the flow of fluid as well as to change directions. We supply straight tees (equal tees) and reducing tees (unequal tees) to pipe fitting distributors throughout the Mumbai, India. Visit our laterals page to learn more about lateral tees.

      Available in:

      Standard and non-standard ANSI dimensions

      All schedules and alloys including carbon steel, aluminum, stainless steel, and others.

      Sizes:1″ thru 24″

      End Prep:

      1. Square cut
      2. 37 1/2 Beveled
      3. Roll Groove
      4. Cut Groove
      5. Flanged Ends

        6. Specification of Equal Tee

        1. Dimensions : ANSI/ASME B16.9, B16.28, MSS-SP-43.
        2. Thickness : Schedule 5S, 10S, 20S, S10, S20, S30, STD, 40S, S40, S60, XS, 80S, S80, S100, S120, S140, S160, XXS and etc.
        3. Size : Seamless ( 1/2″～24″), ERW / Welded / Fabricated Elbow (1/2″～48″)
        4. Type : Seamless / Welded / Fabricated
        5. Form : Straight Tee, Pipe Tee, Equal Tee
        6. Standard: ANSI/ASME, MSS, JIS, DIN, BS, etc.

        Grade of Equal Tee

        1. stainless steel Equal Tee, carbon steel Equal Tee, alloy steel Equal Tee, mild steel Equal Tee : ASTM A403 WP Gr. 304, 304H, 309, 310, 316, 316L, 317L, 321, 347, 904L
        2. Carbon Steel Equal Tee: ASTM A 234 WPB, WPBW, WPHY 42, WPHY 46, WPHY 52, WPH 60, WPHY 65 & WPHY 70.
        3. Low Temperature Carbon Steel Equal Tee: ASTM A420 WPL3, A420 WPL6
        4. Alloy Steel Equal Tee: ASTM / ASME A/SA 234 Gr. WP 1, WP 5, WP 9, WP 11, WP 12, WP 22, WP 91
        5. Duplex Steel Equal Tee : ASTM A 815, ASME SA 815 UNS NO S31803, S32205. Worst-off No. 1.4462
        6. Nickel Alloy Equal Tee : ASTM / ASME SB 336 UNS 2200 ( NICKEL 200 ), UNS 2201 (NICKEL 201 ), UNS 4400 (MONEL 400 ), UNS 8020 ( ALLOY 20 / 20 CB 3, UNS 8825 INCONEL (825), UNS 6600 (INCONEL 600 ), UNS 6601 ( INCONEL 601 ), UNS 6625 (INCONEL 625), UNS 10276 ( HASTELLOY C 276 )

    • We are the leading manufacturer and supplier of Equal Tee in Cubas. Get the best offer for high-quality Equal Tee from us in Cubas. We have plenty of stock of Equal Tee in the Cubas. Place your order online for Equal Tee in Cubas. We are the leading Equal Tee manufacturer in Cubas. Get your best quality Equal Tee in Cubas. Our Equal Tee Buttweld Pipe Fittings are manufactures with dissimilar grades of standard ranges and meets its provisions through international and national standards. Fitwel Industries LLP manufactures buttweld steel pipe tee fittings from stainless steel pipe tee fitting, carbon steel pipe tee fitting, aluminum pipe tee fitting, mild steel pipe tee fitting, alloy steel pipe tee fitting, mild steel pipe tee fitting, Hastelloy pipe tee fitting, Monel pipe tee fitting, nickel pipe tee fitting, Inconel pipe tee fitting, and all other available alloys in all schedules. A pipe fitting can be called a pipe tee whenever it is a 3-way pipe fitting, the most common type of pipe fitting as it is used to combine and/or split the flow of fluid as well as to change directions. We supply straight tees (equal tees) and reducing tees (unequal tees) to pipe fitting distributors throughout the Mumbai, India. Visit our laterals page to learn more about lateral tees.

      Available in:

      Standard and non-standard ANSI dimensions

      All schedules and alloys including carbon steel, aluminum, stainless steel, and others.

      Sizes:1″ thru 24″

      End Prep:

      1. Square cut
      2. 37 1/2 Beveled
      3. Roll Groove
      4. Cut Groove
      5. Flanged Ends

        6. Specification of Equal Tee

        1. Dimensions : ANSI/ASME B16.9, B16.28, MSS-SP-43.
        2. Thickness : Schedule 5S, 10S, 20S, S10, S20, S30, STD, 40S, S40, S60, XS, 80S, S80, S100, S120, S140, S160, XXS and etc.
        3. Size : Seamless ( 1/2″～24″), ERW / Welded / Fabricated Elbow (1/2″～48″)
        4. Type : Seamless / Welded / Fabricated
        5. Form : Straight Tee, Pipe Tee, Equal Tee
        6. Standard: ANSI/ASME, MSS, JIS, DIN, BS, etc.

        Grade of Equal Tee

        1. stainless steel Equal Tee, carbon steel Equal Tee, alloy steel Equal Tee, mild steel Equal Tee : ASTM A403 WP Gr. 304, 304H, 309, 310, 316, 316L, 317L, 321, 347, 904L
        2. Carbon Steel Equal Tee: ASTM A 234 WPB, WPBW, WPHY 42, WPHY 46, WPHY 52, WPH 60, WPHY 65 & WPHY 70.
        3. Low Temperature Carbon Steel Equal Tee: ASTM A420 WPL3, A420 WPL6
        4. Alloy Steel Equal Tee: ASTM / ASME A/SA 234 Gr. WP 1, WP 5, WP 9, WP 11, WP 12, WP 22, WP 91
        5. Duplex Steel Equal Tee : ASTM A 815, ASME SA 815 UNS NO S31803, S32205. Worst-off No. 1.4462
        6. Nickel Alloy Equal Tee : ASTM / ASME SB 336 UNS 2200 ( NICKEL 200 ), UNS 2201 (NICKEL 201 ), UNS 4400 (MONEL 400 ), UNS 8020 ( ALLOY 20 / 20 CB 3, UNS 8825 INCONEL (825), UNS 6600 (INCONEL 600 ), UNS 6601 ( INCONEL 601 ), UNS 6625 (INCONEL 625), UNS 10276 ( HASTELLOY C 276 )

    • We are the leading manufacturer and supplier of Equal Tee in Angola. Get the best offer for high-quality Equal Tee from us in Angola. We have plenty of stock of Equal Tee in the Angola. Place your order online for Equal Tee in Angola. We are the leading Equal Tee manufacturer in Angola. Get your best quality Equal Tee in Angola. Our Equal Tee Buttweld Pipe Fittings are manufactures with dissimilar grades of standard ranges and meets its provisions through international and national standards. Fitwel Industries LLP manufactures buttweld steel pipe tee fittings from stainless steel pipe tee fitting, carbon steel pipe tee fitting, aluminum pipe tee fitting, mild steel pipe tee fitting, alloy steel pipe tee fitting, mild steel pipe tee fitting, Hastelloy pipe tee fitting, Monel pipe tee fitting, nickel pipe tee fitting, Inconel pipe tee fitting, and all other available alloys in all schedules. A pipe fitting can be called a pipe tee whenever it is a 3-way pipe fitting, the most common type of pipe fitting as it is used to combine and/or split the flow of fluid as well as to change directions. We supply straight tees (equal tees) and reducing tees (unequal tees) to pipe fitting distributors throughout the Mumbai, India. Visit our laterals page to learn more about lateral tees.

      Available in:

      Standard and non-standard ANSI dimensions

      All schedules and alloys including carbon steel, aluminum, stainless steel, and others.

      Sizes:1″ thru 24″

      End Prep:

      1. Square cut
      2. 37 1/2 Beveled
      3. Roll Groove
      4. Cut Groove
      5. Flanged Ends

        6. Specification of Equal Tee

        1. Dimensions : ANSI/ASME B16.9, B16.28, MSS-SP-43.
        2. Thickness : Schedule 5S, 10S, 20S, S10, S20, S30, STD, 40S, S40, S60, XS, 80S, S80, S100, S120, S140, S160, XXS and etc.
        3. Size : Seamless ( 1/2″～24″), ERW / Welded / Fabricated Elbow (1/2″～48″)
        4. Type : Seamless / Welded / Fabricated
        5. Form : Straight Tee, Pipe Tee, Equal Tee
        6. Standard: ANSI/ASME, MSS, JIS, DIN, BS, etc.

        Grade of Equal Tee

        1. stainless steel Equal Tee, carbon steel Equal Tee, alloy steel Equal Tee, mild steel Equal Tee : ASTM A403 WP Gr. 304, 304H, 309, 310, 316, 316L, 317L, 321, 347, 904L
        2. Carbon Steel Equal Tee: ASTM A 234 WPB, WPBW, WPHY 42, WPHY 46, WPHY 52, WPH 60, WPHY 65 & WPHY 70.
        3. Low Temperature Carbon Steel Equal Tee: ASTM A420 WPL3, A420 WPL6
        4. Alloy Steel Equal Tee: ASTM / ASME A/SA 234 Gr. WP 1, WP 5, WP 9, WP 11, WP 12, WP 22, WP 91
        5. Duplex Steel Equal Tee : ASTM A 815, ASME SA 815 UNS NO S31803, S32205. Worst-off No. 1.4462
        6. Nickel Alloy Equal Tee : ASTM / ASME SB 336 UNS 2200 ( NICKEL 200 ), UNS 2201 (NICKEL 201 ), UNS 4400 (MONEL 400 ), UNS 8020 ( ALLOY 20 / 20 CB 3, UNS 8825 INCONEL (825), UNS 6600 (INCONEL 600 ), UNS 6601 ( INCONEL 601 ), UNS 6625 (INCONEL 625), UNS 10276 ( HASTELLOY C 276 )

    • We are the leading manufacturer and supplier of Equal Tee in Canada. Get the best offer for high-quality Equal Tee from us in Canada. We have plenty of stock of Equal Tee in the Canada. Place your order online for Equal Tee in Canada. We are the leading Equal Tee manufacturer in Canada. Get your best quality Equal Tee in Canada. Our Equal Tee Buttweld Pipe Fittings are manufactures with dissimilar grades of standard ranges and meets its provisions through international and national standards. Fitwel Industries LLP manufactures buttweld steel pipe tee fittings from stainless steel pipe tee fitting, carbon steel pipe tee fitting, aluminum pipe tee fitting, mild steel pipe tee fitting, alloy steel pipe tee fitting, mild steel pipe tee fitting, Hastelloy pipe tee fitting, Monel pipe tee fitting, nickel pipe tee fitting, Inconel pipe tee fitting, and all other available alloys in all schedules. A pipe fitting can be called a pipe tee whenever it is a 3-way pipe fitting, the most common type of pipe fitting as it is used to combine and/or split the flow of fluid as well as to change directions. We supply straight tees (equal tees) and reducing tees (unequal tees) to pipe fitting distributors throughout the Mumbai, India. Visit our laterals page to learn more about lateral tees.

      Available in:

      Standard and non-standard ANSI dimensions

      All schedules and alloys including carbon steel, aluminum, stainless steel, and others.

      Sizes:1″ thru 24″

      End Prep:

      1. Square cut
      2. 37 1/2 Beveled
      3. Roll Groove
      4. Cut Groove
      5. Flanged Ends

        6. Specification of Equal Tee

        1. Dimensions : ANSI/ASME B16.9, B16.28, MSS-SP-43.
        2. Thickness : Schedule 5S, 10S, 20S, S10, S20, S30, STD, 40S, S40, S60, XS, 80S, S80, S100, S120, S140, S160, XXS and etc.
        3. Size : Seamless ( 1/2″～24″), ERW / Welded / Fabricated Elbow (1/2″～48″)
        4. Type : Seamless / Welded / Fabricated
        5. Form : Straight Tee, Pipe Tee, Equal Tee
        6. Standard: ANSI/ASME, MSS, JIS, DIN, BS, etc.

        Grade of Equal Tee

        1. stainless steel Equal Tee, carbon steel Equal Tee, alloy steel Equal Tee, mild steel Equal Tee : ASTM A403 WP Gr. 304, 304H, 309, 310, 316, 316L, 317L, 321, 347, 904L
        2. Carbon Steel Equal Tee: ASTM A 234 WPB, WPBW, WPHY 42, WPHY 46, WPHY 52, WPH 60, WPHY 65 & WPHY 70.
        3. Low Temperature Carbon Steel Equal Tee: ASTM A420 WPL3, A420 WPL6
        4. Alloy Steel Equal Tee: ASTM / ASME A/SA 234 Gr. WP 1, WP 5, WP 9, WP 11, WP 12, WP 22, WP 91
        5. Duplex Steel Equal Tee : ASTM A 815, ASME SA 815 UNS NO S31803, S32205. Worst-off No. 1.4462
        6. Nickel Alloy Equal Tee : ASTM / ASME SB 336 UNS 2200 ( NICKEL 200 ), UNS 2201 (NICKEL 201 ), UNS 4400 (MONEL 400 ), UNS 8020 ( ALLOY 20 / 20 CB 3, UNS 8825 INCONEL (825), UNS 6600 (INCONEL 600 ), UNS 6601 ( INCONEL 601 ), UNS 6625 (INCONEL 625), UNS 10276 ( HASTELLOY C 276 )

    • We are the leading manufacturer and supplier of Equal Tee in Namibia. Get the best offer for high-quality Equal Tee from us in Namibia. We have plenty of stock of Equal Tee in the Namibia. Place your order online for Equal Tee in Namibia. We are the leading Equal Tee manufacturer in Namibia. Get your best quality Equal Tee in Namibia. Our Equal Tee Buttweld Pipe Fittings are manufactures with dissimilar grades of standard ranges and meets its provisions through international and national standards. Fitwel Industries LLP manufactures buttweld steel pipe tee fittings from stainless steel pipe tee fitting, carbon steel pipe tee fitting, aluminum pipe tee fitting, mild steel pipe tee fitting, alloy steel pipe tee fitting, mild steel pipe tee fitting, Hastelloy pipe tee fitting, Monel pipe tee fitting, nickel pipe tee fitting, Inconel pipe tee fitting, and all other available alloys in all schedules. A pipe fitting can be called a pipe tee whenever it is a 3-way pipe fitting, the most common type of pipe fitting as it is used to combine and/or split the flow of fluid as well as to change directions. We supply straight tees (equal tees) and reducing tees (unequal tees) to pipe fitting distributors throughout the Mumbai, India. Visit our laterals page to learn more about lateral tees.

      Available in:

      Standard and non-standard ANSI dimensions

      All schedules and alloys including carbon steel, aluminum, stainless steel, and others.

      Sizes:1″ thru 24″

      End Prep:

      1. Square cut
      2. 37 1/2 Beveled
      3. Roll Groove
      4. Cut Groove
      5. Flanged Ends

        6. Specification of Equal Tee

        1. Dimensions : ANSI/ASME B16.9, B16.28, MSS-SP-43.
        2. Thickness : Schedule 5S, 10S, 20S, S10, S20, S30, STD, 40S, S40, S60, XS, 80S, S80, S100, S120, S140, S160, XXS and etc.
        3. Size : Seamless ( 1/2″～24″), ERW / Welded / Fabricated Elbow (1/2″～48″)
        4. Type : Seamless / Welded / Fabricated
        5. Form : Straight Tee, Pipe Tee, Equal Tee
        6. Standard: ANSI/ASME, MSS, JIS, DIN, BS, etc.

        Grade of Equal Tee

        1. stainless steel Equal Tee, carbon steel Equal Tee, alloy steel Equal Tee, mild steel Equal Tee : ASTM A403 WP Gr. 304, 304H, 309, 310, 316, 316L, 317L, 321, 347, 904L
        2. Carbon Steel Equal Tee: ASTM A 234 WPB, WPBW, WPHY 42, WPHY 46, WPHY 52, WPH 60, WPHY 65 & WPHY 70.
        3. Low Temperature Carbon Steel Equal Tee: ASTM A420 WPL3, A420 WPL6
        4. Alloy Steel Equal Tee: ASTM / ASME A/SA 234 Gr. WP 1, WP 5, WP 9, WP 11, WP 12, WP 22, WP 91
        5. Duplex Steel Equal Tee : ASTM A 815, ASME SA 815 UNS NO S31803, S32205. Worst-off No. 1.4462
        6. Nickel Alloy Equal Tee : ASTM / ASME SB 336 UNS 2200 ( NICKEL 200 ), UNS 2201 (NICKEL 201 ), UNS 4400 (MONEL 400 ), UNS 8020 ( ALLOY 20 / 20 CB 3, UNS 8825 INCONEL (825), UNS 6600 (INCONEL 600 ), UNS 6601 ( INCONEL 601 ), UNS 6625 (INCONEL 625), UNS 10276 ( HASTELLOY C 276 )

    Coutries & Cities We Serve


    We are renowned & most acclaimed Manufacturer, Suppliers & Exporter And Stockist of Buttweld Equal Tee in Stainless Steel & Carbon Steel And Alloy Steel & High nickle Alloy.

    For More Information About Buttweld Equal Tee Please Call 91-22-2382 9256 or Send an Email to sales@fitwelindia.com

    REQUEST A CALL BACK

    Special Products

    Material