Fitwel Industries LLP are experts in manufacturing Nickel Alloy Pipe Elbow that is in high demand in many applications such as Navy, Marine, Petrochemical & Refining and Gas & Oil markets, Chemical Processing. These industries rely on Nickel Elbow Copper Nickel Pipe Elbow, Monel Pipe Elbow, Inconel Pipe Elbow, SMO 254 Pipe Elbow, Allo 20 Pipe Elbow, Incoloy Pipe Elbow because these fittings can withstand severe corrosion problems in harsh conditions. Our Nickel Alloy Elbow are as per ANSI B16.9, ANSI B16.28, MSS SP-43, or MSS SP-79 standards. Nickel Alloy Pipe Fittings is in between the stainless and nickel categories as it contains characteristics of both. Our manufactured Nickel Alloy 90 degree Elbow has bright annealed and cold rolled grease, where ultra-bright finishes are used for decorative applications.
Nickel Alloy Pipe Elbow in India are limit to a maximum temperature of 1000 Degree F. The high-temperature strength of Nickel Alloy Elbow is basically the same in the range of 950 Degree C to 1150 Degree C. We have a comprehensive inventory of Nickel Alloy Buttweld Fittings and Nickel Alloy Elbows in a large stock and available in different sizes, types, schedules, and pressures. The advantage of Nickel Alloy Pipe Elbow is that it can be precipitation hardened and strengthened by heat treatments.
The Copper Nickel, Inconel 601, Monel, Alloy 20, SMO 254 Buttweld Elbow is where the two bones of the forearm – the radius on the thumb side of the arm and the ulna on the pinky finger side – meet the bone of the upper arm - the humerus. The lower end of the humerus flares out into two rounded protrusions called epicondyles, where muscles attach.
The Difference Between A Long Radius Elbow And A Short Radius Elbow. The long radius elbow refers to the outer diameter of the tube whose radius of curvature is equal to 1.5 times, that is, R = 1.5D. A short radius elbow means that its radius of curvature is equal to the outer diameter of the tube, ie R = D.
The center to face distance of a long radius pipe elbow is always 1.5 times the nominal pipe size, whereas, for a short radius pipe elbow, the center to face distance is equal to the nominal pipe size.
There are also various types of elbow comes in different angle wise, but the most common is i.e.
We are manufacturers and suppliers of Copper Nickel, Inconel 601, Monel, Alloy 20, SMO 254 Buttweld 45° Pipe Elbows that are popularly called as '45 Bends'. Joined to a pipe at a 45° angle, these pipes have a curve that produces a fine 45° directional flow of the inner fluid. Our Copper Nickel, Inconel 601, Monel, Alloy 20, SMO 254 45° Elbows are convenient to convey, are easy to handle, viable, reliable, and come with a good surface finish.
They are customizable as well with a long life span. We are exporters of ANSI B16.9 Copper Nickel, Inconel 601, Monel, Alloy 20, SMO 254 Buttweld 45° Elbows that are supplied in various sizes and threads to the paper, breweries, agricultural, electronics, and food processing industry.
We are a manufacturer, exporter & supplier of 90 Degree Elbows. 90 Degree Elbows have special quality finishing and duress for long life, high pressure, and zero defects.
The product differentiation is based on the premier finish of 90 Degree Elbows with minimum burr at the edge. The V shape formation for perfect welding and fabrication of the fittings in mega projects in the oil and gas industry for the long life of the product.
We manufacture 180-degree elbows in a huge quantity to fulfill the urgent demand of industries. We produce the best quality of 180 elbows by using the tested quality of raw materials, and we also follow all the National and International quality standards while manufacturing these 180-degree Elbows. Our elbow 180 degree helps to change the direction of pipes at 180 degrees since it usually results in low pressure. These elbow’s application is limited to the minimal deposition and low turbulence system. Our offered elbows are dimensionally accurate, efficient, and durable.
Dimensional Tolerances of Buttweld Copper Nickel, Inconel 601, Monel, Alloy 20, SMO 254 Elbows - 45° and 90° - LR and 3D - ASME B16.9 -
Nominal Pipe Size | 1/2 to 2½ | 3 to 3½ | 4 | 5 to 8 |
Outside Diameter at Bevel (D) |
+ 1.6 - 0.8 |
1.6 | 1.6 | + 2.4 - 1.6 |
Inside Diameter at End | 0.8 | 1.6 | 1.6 | 1.6 |
Center to End LR (A/B) | 2 | 2 | 2 | 2 |
Center to End 3D (A/B) | 3 | 3 | 3 | 3 |
Nominal Pipe Size | 10 to 18 | 20 to 24 | 26 to 30 | 32 to 48 |
Outside Diameter at Bevel (D) |
+ 4 - 3.2 |
+ 6.4 - 4.8 |
+ 6.4 - 4.8 |
+ 6.4 - 4.8 |
Inside Diameter at End | 3.2 | 4.8 | + 6.4 - 4.8 |
+ 6.4 - 4.8 |
Center to End LR (A/B) | 2 | 2 | 3 | 5 |
Center to End 3D (A/B) | 3 | 3 | 6 | 6 |
Wall Thickness (t) | Not less than 87.5% of Nominal Wall Thickness |
Dimensional tolerances are in millimeters unless otherwise indicated and are equal ± except as noted.
Nickel Alloy Buttweld 45° Pipe Elbow :
ASTM B336, ASME SB336, Nickel 200 (UNS No. No2200), Nickel 201 (UNS No. N02201), Monel 400 (UNS No. N04400), Monel 500 (UNS No. N05500), Inconel 800 (UNS No. N08800), Inconel 825 (UNS No. N08825), Inconel 600 (UNS No. N06600), Inconel 625 (UNS No. N06625), Inconel 601 (UNS No. N06601), Hastelloy C 276 (UNS No. N10276), Alloy 20 (UNS No. N08020), Titanium (Grade I & II), Cupro-Nickel 70/30, CuNi10Fe1Mn, CuNi30Mn1Fe.
Dimensions : ASME/ANSI B16.9, ASME B16.28, MSS-SP-43
Size : Seamless Elbow ( 1/2″~24″), ERW / Welded / Fabricated Elbow (1/2″~48″)
Type : Seamless / ERW / Welded / Fabricated
Thickness : Schedule 5S, 10S, 20S, S10, S20, S30, STD, 40S, S40, S60, XS, 80S, S80, S100, S120, S140, S160, XXS and etc.
Form : Elbow, 45 Deg Elbow, Long Radius Elbow, Short Radius Elbow, LR Elbow, SR Elbow.
Copper Nickel, Inconel 601, Monel, Alloy 20, SMO 254 Copper Nickel, Inconel 601, Monel, Alloy 20, SMO 254 Buttweld 45° Pipe Elbow :
ASTM A403 WP316/316L, ASTM A403 SA / A 774 WP-S, WP-W, WP-WX 304/304L, ASTM A182 F316L, 304L, DIN 1.4301, DIN1.4306, DIN 1.4401, DIN 1.4404
Copper Nickel, Inconel 601, Monel, Alloy 20, SMO 254 Buttweld Elbow 45 Degree | Butt Weld Long Radius 45 Degree Elbows |
Steel Pipe Elbow | 45° Short Radius Elbow |
ASME B16.9 45 deg Long Radius Elbow | Schedule 10 45 Degree Elbow |
Copper Nickel, Inconel 601, Monel, Alloy 20, SMO 254 45 Degree Pipe Elbow Suppliers | SS 45 Deg. Elbows |
ANSI B16.9 45 Degree Copper Nickel, Inconel 601, Monel, Alloy 20, SMO 254 Buttweld Elbow Dealer | ASME B16.28 Copper Nickel, Inconel 601, Monel, Alloy 20, SMO 254 Buttweld 45 Degree Elbow Exporter |
Welded 45 Deg Elbow Stockholder | Seamless 45° Pipe Elbow Distributors |
Copper Nickel, Inconel 601, Monel, Alloy 20, SMO 254 Buttweld Elbow 90 Degree | Butt Weld Long Radius 90 Degree Elbows |
Steel Pipe Elbow | 90° Short Radius Elbow |
ASME B16.9 90 deg Long Radius Elbow | Schedule 10 90 Degree Elbow |
Copper Nickel, Inconel 601, Monel, Alloy 20, SMO 254 90 Degree Pipe Elbow Suppliers | SS 90 Deg. Elbows |
ANSI B16.9 90 Degree Copper Nickel, Inconel 601, Monel, Alloy 20, SMO 254 Buttweld Elbow Dealer | ASME B16.28 Copper Nickel, Inconel 601, Monel, Alloy 20, SMO 254 Buttweld 90 Degree Elbow Exporter |
Welded 90 Deg Elbow Stockholder | Seamless 90° Pipe Elbow Distributors |
Copper Nickel, Inconel 601, Monel, Alloy 20, SMO 254 Buttweld Elbow 180 Degree | Butt Weld Long Radius 180 Degree Elbows |
Steel Pipe Elbow | 180° Short Radius Elbow |
ASME B16.9 180 deg Long Radius Elbow | Schedule 10 180 Degree Elbow |
Copper Nickel, Inconel 601, Monel, Alloy 20, SMO 254 180 Degree Pipe Elbow Suppliers | SS 180 Deg. Elbows |
ANSI B16.9 180 Degree Copper Nickel, Inconel 601, Monel, Alloy 20, SMO 254 Buttweld Elbow Dealer | ASME B16.28 Copper Nickel, Inconel 601, Monel, Alloy 20, SMO 254 Buttweld 180 Degree Elbow Exporter |
Welded 180 Deg Elbow Stockholder | Seamless 180° Pipe Elbow Distributors |
ASME B16.9 Copper Nickel, Inconel 601, Monel, Alloy 20, SMO 254 Buttweld Elbows are known to deliver exceptional performance and are generally developed for meeting the demands. We offer a broad range of Copper Nickel, Inconel 601, Monel, Alloy 20, SMO 254 Buttweld Elbows through a worldwide network of stock-keeping branches. These Copper Nickel, Inconel 601, Monel, Alloy 20, SMO 254 Buttweld elbows is use in various industries like:
We are renowned & most acclaimed Manufacturer, Suppliers & Exporter And Stockist of Copper Nickel, Inconel 601, Monel, Alloy 20, SMO 254 Buttweld 45, 90 & 180 degree Radius Elbows in Copper Nickel, Inconel 601, Monel, Alloy 20, SMO 254.
For More Information About Copper Nickel, Inconel 601, Monel, Alloy 20, SMO 254 Buttweld 45, 90 & 180 degree Radius Elbows Please Call 91-22-2382 9256 or Send an Email to sales@fitwelindia.com